//G930A\\ Oreo 8.0 Latest Stock ATT Odin files G930AUCUBCTB1

stek-kravari

stek-kravari

Senior Member
Nov 9, 2017
246
199
0
Bitola
Nov 21, 2018 at 11:59 AM
Full ODIN stock ATT files.
Download one file, unzip to 4 files, put in ODIN and flash.
I take no responsibility if anything goes wrong. You don't need to be on certain baseband to flash this, you can flash this directly from any baseband version to this.

Download link: https://androidfilehost.com/?fid=8889791610682935342
Download link for Odin 3.13.1: https://odindownload.com/download/Odin3_v3.13.1.zip
Download link for Odin3_v3.13.1_3B_PatcheD: https://androidfilehost.com/?fid=5862345805528067949

If i helped you don't forget to hit thanks button :D
 
Last edited:
  • Like
Reactions: spiderf16, knowineyez, Trodaire and 11 others
J

jpsebl

Member
Nov 29, 2018
5
0
0
Nov 29, 2018 at 12:07 PM
Bootloop after flashing Oreo AT&T S7 SM-G930A

I flashed my AT&T S7 SM-G930A / G930AUCS8CRJ2 with this firmware. All completed fine in Odin. Upon re-starting the phone is in a bootloop showing "RECOVERY BOOTING..." and seconds later the android blue screen with "Installing system update" message... and minutes later it reboots again to same cycle. I am not longer able to enter into Android Recovery mode to reset (power + home + volume up). Any ideas what I can do.

thanks.
 
stek-kravari

stek-kravari

Senior Member
Nov 9, 2017
246
199
0
Bitola
Nov 29, 2018 at 1:27 PM
jpsebl said:
I flashed my AT&T S7 SM-G930A / G930AUCS8CRJ2 with this firmware. All completed fine in Odin. Upon re-starting the phone is in a bootloop showing "RECOVERY BOOTING..." and seconds later the android blue screen with "Installing system update" message... and minutes later it reboots again to same cycle. I am not longer able to enter into Android Recovery mode to reset (power + home + volume up). Any ideas what I can do.

thanks.
Click to expand...
Try this:
When small blue writing appears, let go of just the power button. It should then boot into recovery.
 
stek-kravari

stek-kravari

Senior Member
Nov 9, 2017
246
199
0
Bitola
Nov 29, 2018 at 1:37 PM
jpsebl said:
I flashed my AT&T S7 SM-G930A / G930AUCS8CRJ2 with this firmware. All completed fine in Odin. Upon re-starting the phone is in a bootloop showing "RECOVERY BOOTING..." and seconds later the android blue screen with "Installing system update" message... and minutes later it reboots again to same cycle. I am not longer able to enter into Android Recovery mode to reset (power + home + volume up). Any ideas what I can do.

thanks.
Click to expand...
Did you have Samsung Reactivation Lock or FRP (factory reset protection) turned on? I think this might be the problem for firmware not to work
 
J

jpsebl

Member
Nov 29, 2018
5
0
0
Nov 29, 2018 at 5:42 PM
stek-kravari said:
Did you have Samsung Reactivation Lock or FRP (factory reset protection) turned on? I think this might be the problem for firmware not to work
Click to expand...

@stek-kravari (When small blue writing appears, let go of just the power button. It should then boot into recovery. )

A>> Tried that few times. It results in the screen going black some seconds, then get blue screen with android logo and the message "installing system updates". few minutes later it resets back to same cycle as before (Recovery Booting...)

About Samsung Reactivation Lock or FPR. I do not recall having that set. Mostly I kept the phone at factory settings since received it. Anyway to check for it at this stage?

Some background, if that helps.

The phone (no rooted, not uploaded new firmware) was working fine till few days ago it turned off itself during a call as battery was depleted. Charged it, turned it on, and it froze on an screen noting it needed the password for device encryption but then the on-screen keyboard did not accept any input.

From there, I turned it off and entered it in Android Recovery mode and I did a factory reset. Rebooted and then it started with Android blue screen and a message of "installing system updates" and minutes later it failed with error of "No Command" and self-reboot to Android recovery mode. From there, I installed the firmware on this thread via Odin which completed successfully, but got into this bootloop issue.

Should I try a different firmware?

Thanks.
 
Last edited:
stek-kravari

stek-kravari

Senior Member
Nov 9, 2017
246
199
0
Bitola
Nov 29, 2018 at 6:39 PM
jpsebl said:
@stek-kravari (When small blue writing appears, let go of just the power button. It should then boot into recovery. )

A>> Tried that few times. It results in the screen going black some seconds, then get blue screen with android logo and the message "installing system updates". few minutes later it resets back to same cycle as before (Recovery Booting...)

About Samsung Reactivation Lock or FPR. I do not recall having that set. Mostly I kept the phone at factory settings since received it. Anyway to check for it at this stage?

Some background, if that helps.

The phone (no rooted, not uploaded new firmware) was working fine till few days ago it turned off itself during a call as battery was depleted. Charged it, turned it on, and it froze on an screen noting it needed the password for device encryption but then the on-screen keyboard did not accept any input.

From there, I turned it off and entered it in Android Recovery mode and I did a factory reset. Rebooted and then it started with Android blue screen and a message of "installing system updates" and minutes later it failed with error of "No Command" and self-reboot to Android recovery mode. From there, I installed the firmware on this thread via Odin which completed successfully, but got into this bootloop issue.

Should I try a different firmware?

Thanks.
Click to expand...
Try this firmware (G930AUCU4CRE4)
https://androidfilehost.com/?fid=818222786056037245
 
J

jpsebl

Member
Nov 29, 2018
5
0
0
Nov 29, 2018 at 8:49 PM
stek-kravari said:
Try this firmware (G930AUCU4CRE4)
Click to expand...
tried that but at phone it fails with error:

SW REV CHECK FAIL: [aboot] Fused 8 > Binary 4

ODIN logs:

<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5815 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> emmc_appsboot.mbn
<ID:0/006> lksecapp.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
 
stek-kravari

stek-kravari

Senior Member
Nov 9, 2017
246
199
0
Bitola
Nov 29, 2018 at 10:05 PM
jpsebl said:
tried that but at phone it fails with error:

SW REV CHECK FAIL: [aboot] Fused 8 > Binary 4

ODIN logs:

<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5815 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> emmc_appsboot.mbn
<ID:0/006> lksecapp.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Did you tried with Patched Odin?
But i think it will be the same result, because the bootloader binary is updated to 8 (G930AUCS8CRJ2)
so i think you only can flash firmware with bootloader 8
 
Last edited:
J

jpsebl

Member
Nov 29, 2018
5
0
0
Nov 30, 2018 at 12:05 AM
stek-kravari said:
Did you tried with Patched Odin?
But i think it will be the same result, because the bootloader binary is updated to 8 (G930AUCS8CRJ2)
so i think you only can flash firmware with bootloader 8
Click to expand...
While trying the patched ODIN I see the phone screen shows FRP LOCK as ON . Mentioning now as I was asked before if FRP was on.
Phone download screen says:

ODIN MODE (HIGH_SPEED)
PRODUCT NAME: SM-G930A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
AP SWEWV: B8(2,1,1,1,1) K8 S8
SECURE DOWNLOAD : ENABLE

Firmware upload with patched ODIN completed successfully, but the phone remains in bootloop at Recovery Booting for some seconds, followed by blue screen with message "Installing system updates" for a minute or so, and reboots again to Recovery Booting... I am still unable to enter in Android Recovery mode to do a factory reset.

Does the FRP LOCK ON means nothing else can be done to the phone to recover?

The log from patched ODIN:

<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5775 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> emmc_appsboot.mbn
<ID:0/006> lksecapp.mbn
<ID:0/006> xbl.elf
<ID:0/006> tz.mbn
<ID:0/006> hyp.mbn
<ID:0/006> devcfg.mbn
<ID:0/006> pmic.elf
<ID:0/006> rpm.mbn
<ID:0/006> cmnlib.mbn
<ID:0/006> keymaster.mbn
<ID:0/006> apdp.mbn
<ID:0/006> msadp.mbn
<ID:0/006> cmnlib64.mbn
<ID:0/006> sec.dat
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> persist.img.ext4
<ID:0/006> userdata.img.ext4
<ID:0/006> modem.bin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> adspso.bin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> cache.img.ext4
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
 
Last edited:
stek-kravari

stek-kravari

Senior Member
Nov 9, 2017
246
199
0
Bitola
Nov 30, 2018 at 9:59 AM
jpsebl said:
While trying the patched ODIN I see the phone screen shows FRP LOCK as ON . Mentioning now as I was asked before if FRP was on.
Phone download screen says:

ODIN MODE (HIGH_SPEED)
PRODUCT NAME: SM-G930A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
AP SWEWV: B8(2,1,1,1,1) K8 S8
SECURE DOWNLOAD : ENABLE

Firmware upload with patched ODIN completed successfully, but the phone remains in bootloop at Recovery Booting for some seconds, followed by blue screen with message "Installing system updates" for a minute or so, and reboots again to Recovery Booting... I am still unable to enter in Android Recovery mode to do a factory reset.

Does the FRP LOCK ON means nothing else can be done to the phone to recover?

The log from patched ODIN:

<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5775 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> emmc_appsboot.mbn
<ID:0/006> lksecapp.mbn
<ID:0/006> xbl.elf
<ID:0/006> tz.mbn
<ID:0/006> hyp.mbn
<ID:0/006> devcfg.mbn
<ID:0/006> pmic.elf
<ID:0/006> rpm.mbn
<ID:0/006> cmnlib.mbn
<ID:0/006> keymaster.mbn
<ID:0/006> apdp.mbn
<ID:0/006> msadp.mbn
<ID:0/006> cmnlib64.mbn
<ID:0/006> sec.dat
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> persist.img.ext4
<ID:0/006> userdata.img.ext4
<ID:0/006> modem.bin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> adspso.bin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> cache.img.ext4
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Try this option
Flash G930AUCS8CRJ2 with Patched Odin again, but untick auto-reboot, when flashing is complete go into recovery mode immediately and see if you can do factory reset
 
J

jpsebl

Member
Nov 29, 2018
5
0
0
Nov 30, 2018 at 12:55 PM
Tried Flashing G930AUCS8CRJ2 with Patched Odin again with untick auto-reboot but I was unable to enter in Android Recovery mode to reset. When rebooting (Home + power + volume up) its goes to same black screen and blue letters "Recovery Booting..." as before, and mins later starts again the cycle of "installing system updates" and bootlop.
 
stek-kravari

stek-kravari

Senior Member
Nov 9, 2017
246
199
0
Bitola
Nov 30, 2018 at 3:11 PM
jpsebl said:
Tried Flashing G930AUCS8CRJ2 with Patched Odin again with untick auto-reboot but I was unable to enter in Android Recovery mode to reset. When rebooting (Home + power + volume up) its goes to same black screen and blue letters "Recovery Booting..." as before, and mins later starts again the cycle of "installing system updates" and bootlop.
Click to expand...
I don't know what to say, i have never seen this problem, try to flash the firmware that your phone was using before this situation. Maybe try this:
Press and hold the Volume down button and Power button for about 15 seconds, until the device restarts.
 
stek-kravari

stek-kravari

Senior Member
Nov 9, 2017
246
199
0
Bitola
Nov 30, 2018 at 3:19 PM
jpsebl said:
Tried Flashing G930AUCS8CRJ2 with Patched Odin again with untick auto-reboot but I was unable to enter in Android Recovery mode to reset. When rebooting (Home + power + volume up) its goes to same black screen and blue letters "Recovery Booting..." as before, and mins later starts again the cycle of "installing system updates" and bootlop.
Click to expand...
Also found some post about checking re-partition in Odin, but im not sure about that, i don't know what are the consequence
 
G

Griffindog

Member
Mar 14, 2011
7
1
0
Dec 8, 2018 at 7:15 AM
Do you know if flashing this official firmware to an unlocked phone form Sprint or other carriers will allow volte and WiFi calling? I am afraid that ATT will not register the IME and will still block these services. I am running G930UUEU8CRJ2 and those services are non-existent in the settings as I expected. Just wondering if anyone has tried this before I waste a bunch of time.

Also, I newer version (G930AUCS8CRK1) was just released Nov 1, 2018 as listed on the ATT website.
 
Last edited:
stek-kravari

stek-kravari

Senior Member
Nov 9, 2017
246
199
0
Bitola
Dec 8, 2018 at 5:33 PM
Griffindog said:
Do you know if flashing this official firmware to an unlocked phone form Sprint or other carriers will allow volte and WiFi calling? I am afraid that ATT will not register the IME and will still block these services. I am running G930UUEU8CRJ2 and those services are non-existent in the settings as I expected. Just wondering if anyone has tried this before I waste a bunch of time.

Also, I newer version (G930AUCS8CRK1) was just released Nov 1, 2018 as listed on the ATT website. I found it hosted here:
gsm2file.com/index.php?file=%2FSamsung%20Flash%20Files%2FG%20Series%2FG930A%20-%20Galaxy%20S7%20Firmware%2FAndroid%208.0%20Oreo%2FG930AUCS8CRK1%20G930AATT8CRK1%20USA%20ATT%20Android%208.0.0%204File%20Firmware
Click to expand...
Don't know if flashing this firmware will allow you to use volte or wifi calling, you can find G930AUCS8CRK1 adb sideload here: https://forum.xda-developers.com/att-galaxy-s7/how-to/sm-g930a-stock-oreo-adb-sideload-t3824795
 
  • Like
Reactions: Griffindog
H

hajkan

Senior Member
Jul 3, 2013
327
31
0
Dec 16, 2018 at 11:06 PM
Has anyone used this root on Android 8 with this phone? What is the diff between the patched and the non patched version of Odin?
 
P

pcwiz84

Member
Sep 17, 2011
13
0
0
Birmingham, AL
Jan 4, 2019 at 12:25 PM
Latest firmware is now G930AUCU4CRL1. Any chance of getting this tweaked to get rooted? Looking forward to what and when a link for the latest stock is adjusted (have 2 S7 phones- one to test root and other to use for daily use.):eek:

Sent from my AT&T Samsung Galaxy S7 using XDA Labs
 
stek-kravari

stek-kravari

Senior Member
Nov 9, 2017
246
199
0
Bitola
Jan 6, 2019 at 1:00 AM
pcwiz84 said:
Latest firmware is now G930AUCU4CRL1. Any chance of getting this tweaked to get rooted? Looking forward to what and when a link for the latest stock is adjusted (have 2 S7 phones- one to test root and other to use for daily use.):eek:
Click to expand...
Adb sideload will be uploaded tomorrow. Thanks for reporting. I don't know if its possible to root it.
 
  • Like
Reactions: pcwiz84
E

EGR_KING

Member
Jan 30, 2019
10
2
0
Jan 31, 2019 at 2:57 PM
stek-kravari said:
Full ODIN stock ATT files.
Download one file, unzip to 4 files, put in ODIN and flash.
I take no responsibility if anything goes wrong. You don't need to be on certain baseband to flash this, you can flash this directly from any baseband version to this.

AP_G930AUCS8CRJ2_CL14306562_QB20119446_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930AUCS8CRJ2_CL14306562_QB20119446_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930AUCS8CRJ2_CP10947856_CL14306562_QB20119446_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G930AATT8CRJ2_CL14306562_QB20119446_REV02_user_low_ship_MULTI_CERT.tar.md5

Download link(gdrive): https://drive.google.com/file/d/1hQf2Gqu2padvfvyJckJDFRRMSV4ELS_z/view
Download link for Odin 3.13.1: https://odindownload.com/download/Odin3_v3.13.1.zip
Download link for Odin3_v3.13.1_3B_PatcheD: https://androidfilehost.com/?fid=5862345805528067949

If i helped you don't forget to hit thanks button :D
Click to expand...
Hello friend my SM-G930A is G930AUCS4APK1 this is the factory firmware. FYI it is the last marshmallow firmware. Can I flash my s7 with the oreo firmware which u gave in the post?
 
You must log in or register to reply here.

New posts

Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone