take battery out put in and press power button volume down button and home
Any other method? I tried it but it does not work! Phone does not work a bit without battery! If you want i can post a video?take battery out put in and press power button volume down button and home
Any other method? I tried it but it does not work! Phone does not work a bit without battery! If you want i can post a video?
i flashed http://xdaforums.com/galaxy-grand-2/development/rom-adityarom-v2-1-t3345275u fried the bootloader
---------- Post added at 07:43 PM ---------- Previous post was at 07:42 PM ----------
u can get in to android?
---------- Post added at 07:45 PM ---------- Previous post was at 07:43 PM ----------
what version of firmware you flashed?
I KNOW! But now i am stuck! This happened before but fortunately i had stock recovery and i was able to factory reset it ! But now it is not showing anythingwhat?!?!?!?
what recovery you are using the rom shoud make no problems at all at the boot loader
I KNOW! But now i am stuck! This happened before but fortunately i had stock recovery and i was able to factory reset it ! But now it is not showing anything
I used to install ROM by using twrp v2.7. But not loading itOk am new here and have to admit that I've had a pretty long day trying to figure out what exactly went wrong with my Galaxy Grand 2 (SM-G7102) after flashing the 4.4.2 Official firmware I downloaded from sammobile to the device using Odin. The process is successful, no errors whatsoever from Odin but when the device restarts it shows the usual Samsung Galaxy Grand 2 logo with some tiny blue text at the top "Recovery Booting" and from there nothing else happens.
I have tried to flash the firmware again using a different PC, USB cable and even Odin version but I get the same result. Previously my device was running Android 4.3 and I wanted to upgrade to Android 4.4.2.
Here is what I get from Odin.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7102DDUBNK1_G7102ODDBNK1_G7102DDUBNK1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
--------------------------------------------------------------------------------------------------
And this is what I get when I enter download mode on my phone:
ODIN MODE
PRODUCT NAME: SM-G7102
CURRENT BINARY: Official
SYSTEM STATUS: Official
KNOX WARRANTY VOID: 0X1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWEREV: S2, T2, A2, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
------------------------------------------------------
So you know, I have even tried flashing a number of custom recoveries such as CWM and the likes to no avail, I either get: "RECOVERY IS NOT SEANDROID ENFORCING" or "COULD NOT DO NORMAL BOOT".
Please help me out guys, I have flashed countless Samsung devices with Odin before but I have never encountered such a situation, what could be the problem here? And better yet, how can it be fixed?
Cant install a custom recovery it says cant do normal boot and sometimes stuck on recovery booting plus the grand 2 logo please help i want to flash custom rom
Did You try to Update with Samsung Kies
---------- Post added at 01:33 PM ---------- Previous post was at 01:31 PM ----------
Had this same Problem before because of F****** Asus Launcher and S*X Viruses on JB. When I upgrade with OTA it won't Update it gets Fails.
Fixed it by Updating with Samsung Kies
Try it 90% will work
Ok am new here and have to admit that I've had a pretty long day trying to figure out what exactly went wrong with my Galaxy Grand 2 (SM-G7102) after flashing the 4.4.2 Official firmware I downloaded from sammobile to the device using Odin. The process is successful, no errors whatsoever from Odin but when the device restarts it shows the usual Samsung Galaxy Grand 2 logo with some tiny blue text at the top "Recovery Booting" and from there nothing else happens.
I have tried to flash the firmware again using a different PC, USB cable and even Odin version but I get the same result. Previously my device was running Android 4.3 and I wanted to upgrade to Android 4.4.2.
Here is what I get from Odin.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7102DDUBNK1_G7102ODDBNK1_G7102DDUBNK1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
--------------------------------------------------------------------------------------------------
And this is what I get when I enter download mode on my phone:
ODIN MODE
PRODUCT NAME: SM-G7102
CURRENT BINARY: Official
SYSTEM STATUS: Official
KNOX WARRANTY VOID: 0X1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWEREV: S2, T2, A2, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
------------------------------------------------------
So you know, I have even tried flashing a number of custom recoveries such as CWM and the likes to no avail, I either get: "RECOVERY IS NOT SEANDROID ENFORCING" or "COULD NOT DO NORMAL BOOT".
Please help me out guys, I have flashed countless Samsung devices with Odin before but I have never encountered such a situation, what could be the problem here? And better yet, how can it be fixed?