• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Galaxy Tab S5e (SM-T720) - Root Instructions (Release 1.0)

Search This thread

Essentrix

Senior Member
Apr 4, 2013
879
182
I had to format my device and decided to give a TWRP another shot with stock rom :)

So I did a clean Odin flash of latest firmware, I rooted it according the instruction from this thread, then I went back to Odin and tried to flash TWPR. I succeed. Then I immidiately boot into TWRP and formated data (Idk if that was a good move... anyway). My tablet booted just fine! But root access is gone.

I can boot to TWRP and boot to system again without any issues. But how to get root from this place? I tried customary flashing from TWRP and stucked in bootloop. Fortunately flashing uninstall.zip make the tab work again. So now I have TWRP, but dont have root access. Do you guys know how to get it now? Thanks in advance

@OhioYJ @ExTall @Essentrix @TiTiB @AHE_XDA @Conan179 @lewmur @Handeman707
Hi mate,
I ran into the same issue. As soon as I rooted the device I couldn't get out of TWRP.
Would be great if one of the more knowledgeable guys around these forums came up with an option.
Always amazed at their ingenuity...
 
  • Like
Reactions: Lord Sithek

TiTiB

Senior Member
Jun 19, 2015
890
666
Earth, for now
[snip] Do you guys know how to get it now? Thanks in advance
I haven't visited this thread in quite a while (now using the S6 tablet, and have it rooted with Magisk). The whole process is much easier; having TWRP already makes it even more so.

Without re-reading the Magisk instructions in OP (which I helped write), I can tell you that the install process is now much different. To get you started, check this out: https://topjohnwu.github.io/Magisk/install.html

...also the S6 thread https://forum.xda-developers.com/f/samsung-galaxy-tab-s6-guides-news-discussion.9131/
 

Sparh4wk

Senior Member
Nov 26, 2012
133
9
Hi, I have problem with android 11 root. I was following the tutorial and after flashing patched magisk and then factory reset, I wasnt able to see magisk manager and when I install it manually then I can see that magisk is not installed :( and ofc root checker tells me that device isnt rooted :( any tips?
 

Lord Sithek

Senior Member
I haven't visited this thread in quite a while (now using the S6 tablet, and have it rooted with Magisk). The whole process is much easier; having TWRP already makes it even more so.

Without re-reading the Magisk instructions in OP (which I helped write), I can tell you that the install process is now much different. To get you started, check this out: https://topjohnwu.github.io/Magisk/install.html

...also the S6 thread https://forum.xda-developers.com/f/samsung-galaxy-tab-s6-guides-news-discussion.9131/
Thanks for your response! I wasnt aware you were partially responsible for this fool-proof guide, thanx a lot! It helped me a lot when I rooted this tab for the first time and I didnt know what exactly is going on 😉

Im well aware of topjohnwu's installing instruction, but as for Sammy devices, I found it basically quite similar to what is presented in this tutorial. With the difference that it advices to patch the whole AP file instead of extracting parts. Additionally, the official TWRP site (https://twrp.me/samsung/samsunggalaxytabs5ewifi.html) advices to prepatch TWRP in Magisk and root the tablet first before we flash TWRP. So this is quite confusing and as far as I know, nobody here found a way to keep latest TWRP and rooted stock system working together. Are we missing something? 🙂

And which instructions for rooting S6 do you have in mind exactly? Could you point to the precise thread? Id be glad to take a look

Cheers
 

TiTiB

Senior Member
Jun 19, 2015
890
666
Earth, for now
Thanks for your response! I wasnt aware you were partially responsible for this fool-proof guide, thanx a lot! It helped me a lot when I rooted this tab for the first time and I didnt know what exactly is going on 😉

Im well aware of topjohnwu's installing instruction, but as for Sammy devices, I found it basically quite similar to what is presented in this tutorial. With the difference that it advices to patch the whole AP file instead of extracting parts. Additionally, the official TWRP site (https://twrp.me/samsung/samsunggalaxytabs5ewifi.html) advices to prepatch TWRP in Magisk and root the tablet first before we flash TWRP. So this is quite confusing and as far as I know, nobody here found a way to keep latest TWRP and rooted stock system working together. Are we missing something? 🙂

And which instructions for rooting S6 do you have in mind exactly? Could you point to the precise thread? Id be glad to take a look

Cheers
Wish I could help more, but it's been 2 years and my memory of what I did is quite fuzzy. I even spent a lot of time looking for my notes for my S5e, and couldn't find anything even remotely useful. Kinda disturbing because I know I created copious notes...hmm.

Sorry about the confusing message of, "The whole process is much easier...". After doing some more reading I realized I was thinking about a different thing.

I can't speak to keeping "..latest TWRP and rooted stock system working together." because I have neither.
 

Lord Sithek

Senior Member
Wish I could help more, but it's been 2 years and my memory of what I did is quite fuzzy. I even spent a lot of time looking for my notes for my S5e, and couldn't find anything even remotely useful. Kinda disturbing because I know I created copious notes...hmm.

Sorry about the confusing message of, "The whole process is much easier...". After doing some more reading I realized I was thinking about a different thing.

I can't speak to keeping "..latest TWRP and rooted stock system working together." because I have neither.
No problem. This finally makes me rest in my TWRP quest :ROFLMAO:
 

Brock Lee

Member
Dec 10, 2019
7
2
I have TWRP and Lineage 18.1 flashed and setup on my s5e. Is following this guide necessary for root in this case, or can I now do it the more familiar (for me) way of installing the manager APK and flashing the zip in TWRP?
 

Essentrix

Senior Member
Apr 4, 2013
879
182
Holy crap!

It seems I was unaware that A11 update already came for this tab! Can anyone confirm this is the correct latest firmware for wifi variant (German region)? I dont want to make any huge mistake 😁

Hi mate. That looks right. I was surprised like you. Been using the Aussie version of 11 for some time now... Works a treat! Only issue is Safetynet pass - the universal patch works but causes random reboots.
 
  • Like
Reactions: Lord Sithek

Lord Sithek

Senior Member
Hi mate. That looks right. I was surprised like you. Been using the Aussie version of 11 for some time now... Works a treat! Only issue is Safetynet pass - the universal patch works but causes random reboots.
Thanx, I installed it too an all is OK. I can tell you that the original USNP 1.1 and 1.2 caused issues for me as well, but 1.1 Samsung mod is working absolutely fine. Attaching it for you!
 

Attachments

  • safetynet-fix-v1.1.1-samsungmod.zip
    811.5 KB · Views: 9
  • Like
Reactions: TiTiB and Essentrix

Lord Sithek

Senior Member
The only thing I found failing is fingerprint in apps. For some reason my banking app refuses my properly added fingerprint and even biometrics in Play Store crash...
I managed to fixed fingerprint, using USNF v.2.0.0.test2 from Github. If anybody needs, I'm attaching. Cheers
 

Attachments

  • safetynet-fix-v2.0.0-test2.zip
    84.8 KB · Views: 13
  • Like
Reactions: TiTiB and bel57

iruiz2

Senior Member
Jun 23, 2011
447
180
So.. after reading this thread for some time...

Is it possible to have both ROOT and TWRP even if it is a previous version of android?

I had it all until tablet froze and I have to start all over again. I would hate to loose any one of them.
 
  • Like
Reactions: Handeman707

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    So.. after reading this thread for some time...

    Is it possible to have both ROOT and TWRP even if it is a previous version of android?

    I had it all until tablet froze and I have to start all over again. I would hate to loose any one of them.
    1
    So.. after reading this thread for some time...

    Is it possible to have both ROOT and TWRP even if it is a previous version of android?

    I had it all until tablet froze and I have to start all over again. I would hate to loose any one of them.

    Hi i have stock android 10 with twrp working fine

    Magisk v20.4(20400).zip
    Magisk manager v7.5.1.apk
    Twrp 3.4.0-2 gts4lvwifi
    Android 10 T720XXU1BTG3 UK Version

    Hope this helps
    1
    Actually I've flashed crDroid Luis ROM twice before and I went back to stock because I missed some features. But thanx 😏
    Yes same here mate... Can't beat stock for this device...
  • 34
    Requirements & Instructions

    HARDWARE & SOFTWARE REQUIREMENTS

    • Windows Laptop/PC with more than 25GB of available storage space
    • SM-T720 Tablet (Galaxy Tab S5e)
    • Samsung USB Type-C Cable (as found in the original packaging)
    • WIFI connection (and if necessary, login details)
    SECTION ONE - LOG-OUT & BACK-UP YOUR DATA

    Log out of your Samsung and Google account(s).

    Back-up ANY and ALL data as following this guide will result in COMPLETE data loss.

    SECTION TWO - DOWNLOAD THE RIGHT UTILITIES

    In order to root, you require several utilities.

    They are as followed:

    Samsung USB Drivers - Provides connectivity between Laptop/PC and your device.

    7-Zip - An open-source file archiver.

    Odin 3.13.1 - Used to flash original or custom Samsung firmware.

    Frija - Downloads the latest available Samsung firmware.

    Magisk Manager (APK) - Helps obtain/manage and extend root options. Download the latest .APK (Application Package).

    Click on the UNDERLINED NAME of the above utilities to download them to your local Laptop/PC.

    PRO-TIP: Create sub-directories, like pictured below, and organize your downloads accordingly:

    fv1roGJh.jpg


    PRO-TIP: Consider a donation to Frija, Magisk or your favorite developers as a token of goodwill and to help ensure future development efforts.

    SECTION THREE - DOWNLOAD THE RIGHT FIRMWARE

    In order to root or, at a later time, return to original factory settings; you MUST have a local copy of firmware.

    This requires knowing our CSC; a three letter code that Samsung devices use to comply with local telecommunication standards and determine device-specific features or updates.

    To locate your CSC, perform the following:

    On your device, go to 'Settings'
    From 'Settings', scroll down to 'About Tablet'.
    Press on 'About Tablet' followed by a press on 'Software Information'
    Scroll downwards until you see 'Service Provider SW Ver.'
    There are three lines.
    The third line will read similar to the following:
    TUR//

    8d79Pd8l.jpg


    Those three characters (e.g., TUR) represent the CSC code for your region.

    PRO-TIP: Your CSC may OR may not be the same as the example; that's expected and perfectly normal.

    Open Frija, which you downloaded under 'Section One', and input your model and CSC.

    Make sure 'Auto' is selected and click on 'Check Update'.

    If the right values are inputted, Frija will look similar to the following:

    dQAmwVIl.jpg


    Click on 'Download' and select a location on your Laptop/PC.

    When the download is complete, Frija will verify and decrypt the firmware.

    Once finished, Frija will look similar to this example:

    aHt9ICBl.jpg


    PRO-TIP: If you can't get Frija to open or download, right click and select 'Run as administrator'.

    SECTION FOUR - UNLOCK THE BOOTLOADER
    THIS STEP WILL REMOVE ALL DATA FROM YOUR DEVICE. PLEASE REFER TO 'SECTION ONE' FOR MORE DETAILS.

    Power off the device.

    Power on your Laptop/PC and login into your Windows account.

    Connect the USB cable to your Laptop/PC but NOT to your device.

    On the device, hold the 'Volume Up' and 'Volume Down' keys at the SAME time.

    zaMSLbnl.jpg


    Connect the USB Cable from your Laptop/PC to the device.

    MzWasVRl.jpg


    You MUST hold BOTH keys during AND after inserting the USB Cable to receive the following warning:

    75AN0JDl.jpg


    PRO-TIP: In SOME cases, you may also need to hold 'POWER' as well.

    To continue towards unlocking your bootloader, hold the 'Volume Up' key for approximately 4 to 5 seconds (or until the screen goes black).

    After 4 to 5 seconds have passed (or if the screen went black), release the 'Volume Up' key and you will be presented with one last warning:

    lEQlbhpl.jpg

    4MPwQhQl.jpg


    Press and click on the 'Volume Up' key to finalize your decision.

    The device will factory reset and from now on, until the bootloader is re-locked, you will receive this warning:

    kzR7FOIl.jpg


    Leave the device to reinitialize. This will take approximately three minutes. The device will erase itself and you will notice several reboots. Afterwards the only activity you'll see is a pulsing 'SAMSUNG' logo. Eventually you will be presented with the 'Let's Go!' set-up screen. Set the device aside for now.


    SECTION FIVE - INSTALLING 7-ZIP

    If you correctly followed the first FOUR sections, you now have the required utilities, firmware and an unlocked bootloader.

    In order to proceed, you MUST install 7-Zip to extract and manipulate key files required for root.

    If you have prior experience with 7-Zip or an alternate compression manager, SKIP this step and proceed to 'SECTION SIX'.

    It IS enough to double-click the EXECUTABLE and install it; you need NOT configure anything.

    However, for a visual reference, follow this LINK to see 7-Zip in use.

    Alternately, for technical support and assistance SPECIFIC to 7-Zip, use this LINK. Search thoroughly before posting.

    SECTION SIX - EXTRACTING FIRMWARE

    Like the CSC code, mentioned in 'SECTION THREE', the name of your download will differ slightly but 'SM-T720' and 'AP_T720' will be in the file name:

    ZCh4LUBl.jpg


    Using 7-Zip, you must extract the following file:

    AP_T720XXU1ASF1_CL15813856_QB24038915_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar.md5

    From the following ZIP container:

    SM-T720_1_20190603182427_gegcc1ebw1_fac.zip

    Right click on your ZIP container, navigate to '7-Zip' and, from the sub-menu, select 'Extract Here'.

    OtP4MFul.jpg


    7-Zip will begin to decompress the necessary files and will result in the following output:

    2rWKOlyl.jpg


    Delete ALL files except for the following:

    SM-T720_1_20190603182427_gegcc1ebw1_fac.zip
    AP_T720XXU1ASF1_CL15813856_QB24038915_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar.md5

    Rename the extension of 'AP_T720XX.....tar.md5' to 'AP_T720XX.....tar' and ignore the warning provided by Windows.

    When finished, your folder contents will look similar to this:

    YFyHhhOl.jpg


    The AP file is required for root.

    PRO-TIP: Keep the ZIP container should you ever want to revert back to original factory settings. If not, delete it and download again later using Frija.

    SECTION SEVEN - ENABLE WIFI, TRANSFER FILES & INSTALL MAGISK MANAGER

    In 'SECTION FOUR', the device was left to reinitialize.

    This means you have a device that requires set-up:

    JugCu1Jl.jpg


    Do NOT log into your Samsung or Google account. The ONLY thing required is WIFI:

    ZkOiEMql.jpg


    PRO-TIP: WIFI and Magisk work together to help achieve root access, provide updates and for module repository access.

    Once you've arrived at the home screen, you need to enable 'Developer Options' to ensure the bootloader is unlocked.

    To verify your bootloader is unlocked, perform the following:

    On your device, go to 'Settings'.
    From 'Settings', scroll down to 'About Tablet'.
    Press on 'Software Information'.
    Scroll downwards until you see 'Build Number'.
    Tap 'Build Number' seven times to enable 'Developer Options'.
    Press the back button on the navigation bar to return to 'Settings'.
    Underneath 'About Tablet', you will now see 'Developer Options'.
    Open this and locate 'OEM Unlocking'.
    If you've followed the outlined steps, your screen should match this example:

    JFcJni6l.jpg


    PRO-TIP: If your screen does NOT match the example, it is possible you are NOT connected to WIFI or you did NOT successfully unlock the bootloader. If all these conditions are true, restart the device and check again. If the issue persists, create a NEW response in the thread.

    Now connect the device to your Laptop/PC and, when prompted, 'Allow access to tablet data'.

    b0NVc8Hl.jpg


    Using Windows Explorer, copy the following files to the 'Download' folder of your device:

    MagiskManager-v7.3.2.apk
    AP_T720XXU1ASF1_CL15813856_QB24038915_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar


    Due to the size of the AP file, this may take several minutes on a low-end Laptop/PC.

    HFesKvhl.jpg


    Once the copy is complete, go to your device and double press on 'MagiskManager-v7.3.2.apk' to initiate the install process.

    PRO-TIP: Due to changes introduced in Android Oreo, you MUST allow permission to install applications (APKs) not obtained from the PlayStore.

    0RZaK81l.jpg


    Click on 'Settings' to open the 'Install unknown apps' screen and toggle 'Allow from this source' on.

    qhhBOZEl.jpg


    Press the back button on the navigation bar to allow the installation:

    FS39HfOl.jpg


    NNK0PKTl.jpg

    SECTION EIGHT - PATCH YOUR AP FILE

    Open your app tray by swiping up and open Magisk Manager.

    You will see a RED QUESTION MARK and the following error:

    'Magisk is not installed.'

    bz3mnObl.jpg


    Click on 'Install' and, when prompted by Magisk, select 'Install' again:

    Af4JK48l.jpg


    e7XCwO8l.jpg


    Magisk will provide another prompt:

    DltXSHRl.jpg


    Choose 'Select and Patch a File' to proceed.

    Magisk will now prompt for device access:

    PagsJ8Nl.jpg


    Click on 'Allow' and the internal Device File Explorer will open to the 'Recent' tab:

    4sKo67xl.jpg


    Click on the top app bar and select 'Downloads' to find your AP file:

    pNrgI3ml.jpg


    And then:

    rx2QxBbl.jpg


    Once inside the 'Downloads' folder, select your AP file to begin the flash process.

    KDr51Avl.jpg


    Once the flash process is complete, the status on the top title bar will change from 'Flashing' to 'Done!':

    UoCfg2il.jpg

    SECTION NINE - RETRIEVAL & DISSECTION

    With our AP file patched by Magisk, you must now locate and transfer it back to our Laptop/PC.

    If you have not already done so, reconnect the device to your Laptop/PC:

    MzWasVRl.jpg


    Open Windows Explorer, double-click on 'Tab S5e', double-click again on 'Tablet' and open the 'Downloads' folder:

    9P7j22Hl.jpg


    Under 'Downloads', you will see THREE files:

    AP_T720XXU1ASF1_CL15813856_QB24038915_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
    magisk_patched.tar
    magisk_install_log_2019-07-10T225845Z


    PRO-TIP: 'magisk_install_log' is an output of the AP file patching process. If you encountered ANY errors, keep a copy and raise a question in the thread.

    Delete 'AP_T720XX.....tar' and copy 'magisk_patched.tar' back to your Laptop/PC; preferably to the 'FIRMWARE' sub-directory suggested in 'SECTION TWO'.

    Due to the size of the 'magisk_patched.tar' file, this may take several minutes on a low-end Laptop/PC.

    Once the transfer is complete, let's make room in our 'FIRMWARE' folder by deleting the 'AP_T720XX.....tar' file.

    This should leave you with TWO files:

    SM-T720_1_20190603182427_gegcc1ebw1_fac.zip
    magisk_patched.tar


    Move OR delete the 'SM-T720.....fac.zip' container so you can focus exclusively on 'magisk_patched.tar'.

    With NO files left except for 'magisk_patched.tar', you must now use 7-Zip again to extract its contents.

    PRO-TIP: Refer to 'SECTION FIVE' if you need a refresher on 7-Zip.

    Right-click on the 'magisk_patched.tar' container, navigate to '7-Zip' and, from the sub-menu, select 'Extract Here'.

    Once all files are extracted, your output will look similar to, if NOT exactly like, this:

    4glKI6Pl.jpg


    Now DELETE these files:

    dtbo.img.lz4
    magisk_patched.tar
    modem.bin.lz4
    persist.img.ext4.lz4
    system.img.ext4.lz4
    userdata.img.ext4.lz4
    vendor.img.ext4.lz4


    In order to have the following:

    meta-data [FOLDER]
    boot.img
    recovery.img
    vbmeta.img


    If done correctly, your folder output will look like this:

    ExxEzTMl.jpg

    SECTION TEN - CREATE YOUR TAR
    In 'SECTION NINE', you organized the following list of files/folder:

    meta-data [FOLDER]
    boot.img
    recovery.img
    vbmeta.img


    Using Windows Explorer, navigate to your 'Firmware' folder (or whatever location you used).

    Now, using 7-Zip, you need to compress these files into a TAR container.

    This means you must select ALL files.

    This can be achieved by using CRTL + A on your keyboard or simply by highlighting them all with a left-click:

    N9HBwIyl.jpg


    Right-click on the selected files, navigate to '7-Zip' and, from the sub-menu, select 'Add to archive...':

    Rmtlfb6l.jpg


    If done correctly, the following screen will present itself:

    cRVRo3ll.jpg


    Only THREE things MUST be done to complete our TAR:

    Change the filename to 'magisk_patched' WITHOUT quotations
    Change the 'Archive format' to 'TAR'
    Click on 'OK' to confirm your decisions and begin compression:

    ikRStEGl.jpg


    PRO-TIP: If, for ANY reason, you don't want to keep these files, you can select 'Delete files after compression' before clicking on 'OK'.

    With this step complete, you are left with the following output:

    y5EVzEjl.jpg

    SECTION ELEVEN - DOWNLOAD MODE
    Using the 'Power' key on your device , select 'Power off':

    twjJLsYl.jpg


    Disconnect the USB cable or the device will switch to 'Charging Mode':

    BFYCibVl.jpg


    On your device, hold 'Volume Up' and 'Power' together until the 'Android Recovery' screen appears:

    c57zM9pl.jpg


    'VOLUME UP' will navigate upwards, 'VOLUME DOWN' will navigate downwards, and 'POWER' will highlight and confirm your choice.

    PRO-TIP: You may have to press 'POWER' twice.

    Highlight and select 'Reboot to bootloader' to properly put your device into 'Download Mode':

    1QQJ9Yyl.jpg


    Reconnect the device back to your Laptop/PC.

    SECTION TWELVE - ODIN PREPARATION AND FLASH
    Now, because recovery is unavailable, you must use Odin to flash your TAR file to introduce root.

    In 'SECTION TWO', you downloaded Odin and created a folder for it.

    You must now go to that folder, or whatever folder you opted to use, and decompress Odin.

    Right-click on the 'Odin3_v3.13.1.zip' container, navigate to '7-Zip' and, from the sub-menu, select 'Extract Here'.

    This will create a sub-directory called 'Odin3_v3.13.1'.

    Double-click and you will be presented with the following output:

    cxuGaeHl.jpg


    Double-click on 'Odin3 v3.13.1.exe' to launch the application.

    You will receive a prompt written in both English and Korean. Click 'OK' to close the warning.

    With Odin open, locate and click on the second tab called 'Options' and uncheck 'Auto Reboot':

    maMzpwql.jpg


    When you click on the 'AP' button, Windows File Explorer will automatically launch.

    As per 'SECTION NINE', and using Windows File Explorer, navigate to the location you created and saved 'magisk_patched.tar'.

    Double-click 'magisk_patched.tar' (or alternatively, highlight the file and select 'Open') to have it load into the AP slot:

    8pbfzuSl.jpg


    With all these steps completed and your device connected, STOP and read below:

    A green navigation bar on Odin, and a white bar on you device, will appear.
    This indicates that key files are being written to your device.
    Irregardless of how quick or slow the progress bar is, DO NOT disconnect the device.
    The device, no matter if the flash was successful or not, will do NOTHING because you unchecked 'Auto Reboot'.
    Wait for 'PASS!' to appear in Odin before you disconnect your device.

    If everything was done correctly, Odin will look like this:

    NN7SbLpl.jpg


    Your device, on the other hand, will have the following bar across its screen:

    Otm716yl.jpg


    Now disconnect the device, STOP and read below until you feel comfortable enough to execute the instructions:

    Hold 'Volume Down' and 'Power' until the screen goes black (also known as a 'Soft Reset').
    The moment the screen goes black, continue to hold down 'Power' but QUICKLY switch so now only 'Volume Up' is being held.
    Do this until you enter 'Android Recovery'.
    As outlined in 'SECTION ELEVEN', use the 'Volume Keys' & 'Power' to navigate the menu.
    First select 'Wipe Data/Factory Reset' and, upon completion, choose 'Reboot System Now'.
    Your device will reboot several times. This is expected behavior.

    If everything was done correctly, your device will reinitialize and require set-up again:

    JugCu1Jl.jpg

    SECTION THIRTEEN - ROOT VERIFICATION
    Like 'SECTION SEVEN', you need WIFI to complete set-up but mustn't log into ANY accounts.

    Also, like 'SECTION SEVEN', you will need to install Magisk Manager again.

    Once the first two steps are complete, power-off the device:

    twjJLsYl.jpg


    With the device powered off AND disconnected, hold down 'Volume Up' and 'Power' until you see the following warning:

    bjeoycEl.jpg


    WARNING: From now on, on EVERY BOOT or REBOOT, you MUST do this if you want Magisk enabled.


    Release all keys and allow the device to boot.

    Once Android is loaded, launch Magisk from your app drawer.

    If you are prompted to update, do so but select 'Direct Install (Recommended)' and remember the key sequence on reboot:

    qH7RzSGl.jpg


    NjFIzHHl.jpg


    Magisk Manager, if set-up properly AND with root enabled, will look like this:

    ezi9gBOl.jpg


    Magisk Manager, if NOT set-up properly OR with root disabled, will look like this:

    Zq9WJAIl.jpg


    PRO-TIP: To further validate root, you can use an application like 'Root Checker' to verify:

    BFzyiJol.jpg


    You may now log into your accounts and finish configuring the device.
    23
    This guide is based on the original PewPewK post.

    Which, in turn, was inspired by TopJohnWu's 'Samsung (System-as-root)' Magisk Installation Guide

    It is an extended walk through aimed at ALL users, meant specifically for the SM-T720 (Tab S5e) BUT specifically meant to:

    UNLOCK THE BOOTLOADER
    INTRODUCE ROOT
    RESTORE STOCK/RELOCK THE BOOTLOADER


    Because of the community support, the options available to you have become numerous!

    So if you're looking to squeeze EVERY inch out of your tablet, search the thread for suggestions or see the links below:

    Go HERE if you are interested in custom recovery (e.g., TWRP).

    Go HERE if you are interested in custom ROMs or kernels.

    ROOT WARNING

    Introducing root and further tampering may lead to unfavorable performance and/or shortened device lifespan.

    In extreme circumstances, it may render your device OR specific hardware components unstable or non-functioning.

    By following this guide, you ACKNOWLEDGE these risks and release AHE_XDA, XDA and its CONTRIBUTORS of ANY and ALL responsibility.

    WARRANTY WARNING

    In many states, countries, provinces and territories, introducing root voids device warranty (manufacturer's and/or third-party). Please consult your regional Samsung office, place of purchase or third-party warranty company to determine if these terms are applicable to you.

    ALTERNATIVES TO ROOT

    If you are looking to maintain warranty and continue access to Samsung-specific features, consider disabling or uninstalling unwanted applications via the Android Debugging Bridge (ADB).

    TiTiB, a genius in his own right, has a thread dedicated to the Tab S5e and bloat removal without the cost of warranty.

    Visit it HERE and click 'Thanks!' if it helped.
    13
    Recognition & Sharing Policy

    RECOGNITION

    This guide, and the required methods and software, would NOT be possible with the efforts of the following individuals:

    @topjohnwu
    @ianmacd
    @LuK1337
    @invmini
    @CrazyApe
    @eragon5779
    @PewPewK

    A sincere thank you for your time, hard work and, most importantly, determination to explore.

    Praise and tribute is also extended to @TiTiB for his editorial skills, testing and much needed feedback.

    SHARING POLICY
    Do NOT reuse any part of this guide without first asking.
    Do NOT reuse any part of this guide without giving credit to those in the 'RECOGNITION' header.

    ALL photographs, not screenshots, are the property of myself (AHE_XDA). I spent considerable time capturing and editing each posted photograph. Therefore photographs may NOT be downloaded, copied, reproduced or used anyway without consent.

    If there's something you like (styling/format/text/photographs) and want to use, ask.
    8
    Known Issues (January 31, 2020)

    KNOWN ISSUES (January 31, 2020)

    Where's Recovery?

    Explanation: TWRP (custom recovery) is NOW available. Please visit TeamWin for instructions.

    Workaround: Resolved as of August 6, 2019.

    Magisk shows as 'Not Installed.'

    Explanation: Magisk, due to the changes to the recovery partition in Android Pie & above, will not boot automatically. It requires user intervention.

    Workaround: To enable root access, be prepared to hold 'Volume Up' and the 'Power' keys on EVERY BOOT or REBOOT.

    WiFi stopped working after installing 'magisk_patched.tar' with Odin.

    Explanation: Cause unknown as of January 31, 2020.

    Workaround: In some cases, after introducing root ('magisk_patched.tar'), WiFi may stop working. If this happens, do the following:

    From the app drawer, go to Settings > Connections > Wi-Fi.
    Highlight and select your WiFi network.
    Long press the network name and select "Forget Network".
    Wait 3 to 5 seconds.
    Press and click on the network in which you asked Android to forget.
    Re-enter your password.
    If entered correctly, WiFi will resume connectivity.

    "Your phone is locked because the payment service was uninstalled."

    OR

    Only official released binaries are allowed to be flashed (vbmeta).

    Explanation: To protect against various threats (e.g., compromised data, theft or root), Samsung, as of December 2017, introduced a series of low-level initiatives to LOCK the device should ANY part of Knox be compromised. These initiatives are frequently referred to as 'KG' (KnoxGuard) or 'RMM' (Remote Monitoring and Management).

    Further details can be found HERE.

    Workaround: A workaround now exists, thanks to @ianmacd, but requires TWRP to be installed followed by the Samsung multi-disabler file.

    If you do NOT intend to install TWRP, precautions MUST be taken not to freeze, disable or remove the following files:

    'Payment Services' (com.samsung.android.kgclient)
    'KnoxGuard' (knoxguard.apk)

    In most circumstances, the issue will present itself immediately after the application(s) is frozen, disabled or removed. In rare circumstances, only after a device restart.

    PRO-TIP: Do NOT reboot unless absolutely necessary; opt to power down the device.

    Should you encounter EITHER error, you will need to boot into 'Download Mode', revert to original factory settings and verify your Google account to avoid an FRP LOCK.

    To enter 'Download Mode' and recover from the error:

    Connect a USB cable to your Laptop/PC.
    With power-off on the device, hold down BOTH 'Volume Up' and 'Volume Down'.
    Connect the USB cable to the device, while holding down both volume keys, and press 'Power'.
    If done correctly, the device will boot to 'Download Mode'.

    My Streaming Service won't log me in, no longer provides HD viewing or doesn't allow offline downloads.

    Explanation: Widevine is a digital rights management platform used by major streaming companies to prevent piracy.

    Low-level details can be found HERE.

    Workaround:

    Resolved by @ianmacd and his 'liboemcrypto disabler' via Magisk Manager and/or Custom Recovery (e.g, TWRP) as of April 4, 2018.

    NOTE: If you installed TWRP and flashed the Samsung multi-disabler file, this issue is resolved of as December 13, 2019.

    If you do NOT intend to install TWRP, log-out and uninstall your streaming application(s). With root introduced and magisk enabled, download 'liboemcrypto' from 'Modules' within Magisk Manager. You will be asked to restart after installing the module. Do this and re-enable Magisk on boot. Sideload your streaming application(s) from a source OUTSIDE the Playstore. Log in and resume streaming.


    Items are ADDED and UPDATED as they are discovered, solved or a workaround is introduced. Please message me directly if something is missing.
    6
    Return To Stock Instructions

    To return to stock and/or relock the bootloader, these are the best instructions available:

    https://forum.xda-developers.com/showpost.php?p=79698366&postcount=44

    They are originally intended for the Galaxy S10 series but work perfectly for the Tab S5e (SM-T720).

    Full credit to @robbo1947.