Combination firmwares are for réparations...What is the difference between firmware combination and the latest you uploaded? Thank you.
Combination firmwares are for réparations...What is the difference between firmware combination and the latest you uploaded? Thank you.
@cardi77
Wrote Conversation formerly known as PM...
Because few of your posts are far away from fair...
@ All
New Tizen 5.5.0.1 not leaked yet...
FUB5 is only for KOO and XAR released yet as FOTA...
So hopefully more luck if more CSC released... chance increased for Leak of Odin Files...
Best Regards
P.S.:
I need FUB5 as netOdin leak... for my SM-R500 tests... and Blood Oxygen investigation...
Because FOTA Rooting method not work...
inside FOTA/Delta dd dump possible
cm.bin YES
dzImage YES Root required
dzImage-recovery YES Root required
param.bin YES Root required
sboot.bin YES
up_param.bin YES Root required
ACR: R500XXU1ETL2
AFR: R500XXU1ETL2
ARO: R500XXU1DSL1
ATO: R500XXU1ETL2
AUT: R500XXU1ETL2
BGL: R500XXU1ETL2
BRI: R500XXU1ETL2
BTU: R500XXU1ETL2
BVO: R500XXU1DSL1
CAC: R500XXU1ETL2
CAM: R500XXU1ETL2
CHC: R500XXU1ETL2
CHO: R500XXU1ETL2
COO: R500XXU1ETL2
DBT: R500XXU1ETL2
ECT: R500XXU1ETL2
EUR: R500XXU1ETL2
ILO: R500XXU1ETL2
INU: R500XXU1ETL2
ITV: R500XXU1ETL2
KOO: R500XXU1FUB5
KSA: R500XXU1ETL2
LUX: R500XXU1ETL2
MID: R500XXU1ETL2
MWD: R500XXU1ETL2
MXO: R500XXU1ETL2
MYM: R500XXU1ETL2
NEE: R500XXU1ETL2
NPL: R500XXU1ETL2
PAK:
PEO: R500XXU1ETL2
PHE: R500XXU1ETL2
PHN: R500XXU1ETL2
ROM: R500XXU1ETL2
SEB: R500XXU1ETL2
SEE: R500XXU1ETL2
SEK: R500XXU1ETL2
SER: R500XXU1ETL2
SKZ: R500XXU1ETL2
TGY: R500XXU1ETL2
THO: R500XXU1ETL2
THR:
TPA: R500XXU1ETL2
TPH: R500XXU1ETL2
TTT: R500XXU1ETL2
TUN: R500XXU1ETL2
TUR: R500XXU1ETL2
UPO: R500XXU1ETL2
XAC: R500XXU1DSL1
XAR: R500XXU1FUB5
XEF: R500XXU1ETL2
XEH: R500XXU1ETL2
XEO: R500XXU1ETL2
XEZ: R500XXU1ETL2
XFA: R500XXU1ETL2
XJP: R500XXU1ETL2
XME: R500XXU1ETL2
XNZ: R500XXU1ETL2
XSA: R500XXU1ETL2
XSE: R500XXU1ETL2
XSG: R500XXU1ETL2
XSK: R500XXU1ETL2
XSP: R500XXU1ETL2
XTC: R500XXU1ETL2
XXV: R500XXU1ETL2
ZTO: R500XXU1ETL2
I just uploaded the fw using the Weareble app, not using NetOdin. I read some cases where if you flashed only 2 files like you said, the watch was bricked, but using the official app.. I don't know why this happens.@jorgine23
Your result sounds you flashed WITHOUT BL...
?
Is this correct? So instead 3 from 3 files you flashed only 2 of 3...
Code:wd_cm_setup_ap: Failed to run soft AP: -1
This seems only repairable with USB cable... to flash with Odin instead netOdin...
If you need USB Pinout... look somewhere here IMHO:
Best Regards
Nope, I tried to soldering an usb cable but it failed, so I just wanna try with a 6pin connectorI have screwed up, I flashed via NetOdin ETL2 without BL because it was missing on the ZIP I downloaded. What should I do now?
Have you managed to fix it? I flashed it without BL and I am getting that Failed to run soft AP: -1 error.