[GCam] Camera PX for Google Pixel 1 / 2 / 3 / 3a / 4

Search This thread
By:
Advanced…
Yassinbadr

Yassinbadr

New member
Jan 7, 2021
1
0
Hi
i downloaded the Magisk module and installed it and the G-cam is telling me that it's ( Not installed) on the G-cam app
 
Last edited:
M

MAX_hey

Member
Dec 18, 2013
34
8
Brasília
senor_aidil said:
Hi! Can anyone share the best overall settings without the modules? Appreciate it alot. Thanks!
Click to expand...
I am using the following settings on my 3a and the result has been incredible. I always use it with the HDR+ Enhanced enabled.


ADVANCED:
HDR+ control: On

PX MOD SETTINGS:
Synthetic Fill Flash: Off
Disable Focus Tracking: Off
Disable Motion Photos: On
Non-ZSL Frame Count: Default
Maximum Zoom Level: Default
Super Res Zoom Always On: Yes
Force Sabre Merge: Off
DCI-P3 Color Space: On
Portrait HDR+ Enhanced: Off
AI AWB for ZSL: Off
AI AWB for HDR+ Enhanced: On
AI AWB for Night Sight: On

LIB PATCHER:
Tone Curve: On (with default and stock settings)
Shadows Point: 0.33 (Default)
Highlight Points: 0.33 (Default)
Shadows (Lower Curve Half): -6 (Shadows Stock)
Highlights (Upper Curve Half): 15 (Highlights Stock)

Force System Noise Model: Off
Disable Dehaze: Off
Sharpness: 0
Saturation: 1.5
Global Luma Denoise: 1.0 Default
Global Chroma Denoise: 1.0 Default

WAVELET LUMA DENOISE LEVELS
Level 1 (Fine Details): 0.375
Level 2 (Rough Surfaces): 0.375
Level 3 (Edges): 0.375
Level 4 (Smooth Surfaces): 0.5
WAVELET CHROMA (Low Frequency) DENOISE LEVELS
Level 1 (Fine Details): 0.375
Level 2 (Rough Surfaces): 0.375
Level 3 (Edges): 0.375
Level 4 (Smooth Surfaces): 0.5
WAVELET CHROMA (High Frequency) DENOISE LEVELS
Level 1 (Fine Details): 0.375
Level 2 (Rough Surfaces): 0.375
Level 3 (Edges): 0.375
Level 4 (Smooth Surfaces): 0.5



Is an adaptation of the settings that the @Gnaius posted here previously. Tell us how these settings work for you.
 
Last edited:
  • Like
Reactions: 76Nightwish and senor_aidil
greyhd

greyhd

Senior Member
Apr 27, 2012
1,839
661
MAX_hey said:
I am using the following settings on my 3a and the result has been incredible. I always use it with the HDR+ Enhanced enabled.


ADVANCED:
HDR+ control: On

PX MOD SETTINGS:
Synthetic Fill Flash: Off
Disable Focus Tracking: Off
Disable Motion Photos: On
Non-ZSL Frame Count: Default
Maximum Zoom Level: Default
Super Res Zoom Always On: Yes
Force Sabre Merge: Off
DCI-P3 Color Space: On
Portrait HDR+ Enhanced: Off
AI AWB for ZSL: Off
AI AWB for HDR+ Enhanced: On
AI AWB for Night Sight: On

LIB PATCHER:
Tone Curve: On (with default and stock settings)
Shadows Point: 0.33 (Default)
Highlight Points: 0.33 (Default)
Shadows (Lower Curve Half): -6 (Shadows Stock)
Highlights (Upper Curve Half): 15 (Highlights Stock)

Force System Noise Model: Off
Disable Dehaze: Off
Sharpness: 0.125
Saturation: 1.5
Global Luma Denoise: 1.0 Default
Global Chroma Denoise: 1.0 Default

WAVELET LUMA DENOISE LEVELS
Level 1 (Fine Details): 0.375
Level 2 (Rough Surfaces): 0.375
Level 3 (Edges): 0.375
Level 4 (Smooth Surfaces): 0.5
WAVELET CHROMA (Low Frequency) DENOISE LEVELS
Level 1 (Fine Details): 0.375
Level 2 (Rough Surfaces): 0.375
Level 3 (Edges): 0.375
Level 4 (Smooth Surfaces): 0.5
WAVELET CHROMA (High Frequency) DENOISE LEVELS
Level 1 (Fine Details): 0.375
Level 2 (Rough Surfaces): 0.375
Level 3 (Edges): 0.375
Level 4 (Smooth Surfaces): 0.5



Is an adaptation of the settings that the @Gnaius posted here previously. Tell us how these settings work for you.
Click to expand...

Which camera version are you using? You are on A10? Thank you
 
senor_aidil

senor_aidil

Member
Dec 17, 2015
14
2
MAX_hey said:
I am using the following settings on my 3a and the result has been incredible. I always use it with the HDR+ Enhanced enabled.


ADVANCED:
HDR+ control: On

PX MOD SETTINGS:
Synthetic Fill Flash: Off
Disable Focus Tracking: Off
Disable Motion Photos: On
Non-ZSL Frame Count: Default
Maximum Zoom Level: Default
Super Res Zoom Always On: Yes
Force Sabre Merge: Off
DCI-P3 Color Space: On
Portrait HDR+ Enhanced: Off
AI AWB for ZSL: Off
AI AWB for HDR+ Enhanced: On
AI AWB for Night Sight: On

LIB PATCHER:
Tone Curve: On (with default and stock settings)
Shadows Point: 0.33 (Default)
Highlight Points: 0.33 (Default)
Shadows (Lower Curve Half): -6 (Shadows Stock)
Highlights (Upper Curve Half): 15 (Highlights Stock)

Force System Noise Model: Off
Disable Dehaze: Off
Sharpness: 0.125
Saturation: 1.5
Global Luma Denoise: 1.0 Default
Global Chroma Denoise: 1.0 Default

WAVELET LUMA DENOISE LEVELS
Level 1 (Fine Details): 0.375
Level 2 (Rough Surfaces): 0.375
Level 3 (Edges): 0.375
Level 4 (Smooth Surfaces): 0.5
WAVELET CHROMA (Low Frequency) DENOISE LEVELS
Level 1 (Fine Details): 0.375
Level 2 (Rough Surfaces): 0.375
Level 3 (Edges): 0.375
Level 4 (Smooth Surfaces): 0.5
WAVELET CHROMA (High Frequency) DENOISE LEVELS
Level 1 (Fine Details): 0.375
Level 2 (Rough Surfaces): 0.375
Level 3 (Edges): 0.375
Level 4 (Smooth Surfaces): 0.5



Is an adaptation of the settings that the @Gnaius posted here previously. Tell us how these settings work for you.
Click to expand...
IMG_20210113_175311.jpg
Look at the dark side of the box. Why is it looks bad? Already tuned my settings same as urs. Pixel 4xl
 
M

MAX_hey

Member
Dec 18, 2013
34
8
Brasília
MAX_hey said:
I am using the following settings on my 3a and the result has been incredible. I always use it with the HDR+ Enhanced enabled.


ADVANCED:
HDR+ control: On

PX MOD SETTINGS:
Synthetic Fill Flash: Off
Disable Focus Tracking: Off
Disable Motion Photos: On
Non-ZSL Frame Count: Default
Maximum Zoom Level: Default
Super Res Zoom Always On: Yes
Force Sabre Merge: Off
DCI-P3 Color Space: On
Portrait HDR+ Enhanced: Off
AI AWB for ZSL: Off
AI AWB for HDR+ Enhanced: On
AI AWB for Night Sight: On

LIB PATCHER:
Tone Curve: On (with default and stock settings)
Shadows Point: 0.33 (Default)
Highlight Points: 0.33 (Default)
Shadows (Lower Curve Half): -6 (Shadows Stock)
Highlights (Upper Curve Half): 15 (Highlights Stock)

Force System Noise Model: Off
Disable Dehaze: Off
Sharpness: 0.125
Saturation: 1.5
Global Luma Denoise: 1.0 Default
Global Chroma Denoise: 1.0 Default

WAVELET LUMA DENOISE LEVELS
Level 1 (Fine Details): 0.375
Level 2 (Rough Surfaces): 0.375
Level 3 (Edges): 0.375
Level 4 (Smooth Surfaces): 0.5
WAVELET CHROMA (Low Frequency) DENOISE LEVELS
Level 1 (Fine Details): 0.375
Level 2 (Rough Surfaces): 0.375
Level 3 (Edges): 0.375
Level 4 (Smooth Surfaces): 0.5
WAVELET CHROMA (High Frequency) DENOISE LEVELS
Level 1 (Fine Details): 0.375
Level 2 (Rough Surfaces): 0.375
Level 3 (Edges): 0.375
Level 4 (Smooth Surfaces): 0.5



Is an adaptation of the settings that the @Gnaius posted here previously. Tell us how these settings work for you.
Click to expand...
This is how it has worked for me.
 

Attachments

  • IMG_20210102_120418.jpg
    IMG_20210102_120418.jpg
    1.8 MB · Views: 161
cstark27

cstark27

Senior Member
Jul 2, 2010
1,237
7,236
PXv8.1.1

An update from @johngalt1, @Urnyx05 and myself.

  • Requirements:
  • OS: Android 10 or 11
  • Device: Google Pixel [2 thru 5] series (please do not post in this thread about non Pixel devices)

  • Download: PXv8.1_GCam-v1.1 .apk
  • Mirror: https://www.celsoazevedo.com/files/android/google-camera/dev-cstark27/
  • Bug report template: https://forum.xda-developers.com/showpost.php?p=80974289&postcount=2

  • Changelog:
    • Pixel 2/2XL: Enabled 1080p as default Timelapse/enable 4k selection (drop down UI while in Timelapse mode)
    • Pixel 3a/3aXL: Modify Portrait zoom to be the same as other Pixels
    • Pixel 4a 5G/Pixel 5: Enable Astrophotography on Ultra-Wide Angle
    • Add max zoom level option
    • Add NonZSL Frame Count Override option
    • Add Sabre Always On on supported sensors
    • Add an option to disable Sabre (by default, it's enabled only on supported sensors)
    • Add Shasta & Shasta Factor option (experimental setting for Night Sight/Astro)
    • Add countdown to regular Night Sight capture
    • Replace Astrophotography options in drop down menu with permanent Auto/Forced button
    • Fixed photosphere
    • Fixed crash on those devices with wrong resolution on motion photos
    • Fixed slow motion on Pixels
    • Fixed wrong interface being selected at startup randomly (the issue with random wrong zoom buttons or black viewfinder)
    • Adjusted video bar size
    • Unhidden the option for enforced video stabilizations (beta)
    • Fixed artifacts on Sabre
    • Fixed colors on RAWs (for SOME non-Pixels) - now you can read the incorporated profile (thanks Savitar)
    • Cleaned up code

Libpatcher will come later.
 
Last edited:
  • Like
Reactions: gogokmen, 76Nightwish, ViperPyro and 17 others
senor_aidil

senor_aidil

Member
Dec 17, 2015
14
2
cstark27 said:
PXv8.1.1

An update from @johngalt1, @Urnyx05 and myself.

  • Requirements:
  • OS: Android 10 or 11
  • Device: Google Pixel [2 thru 5] series (please do not post in this thread about non Pixel devices)

  • Download: PXv8.1_GCam-v1.1 .apk
  • Mirror: https://www.celsoazevedo.com/files/android/google-camera/dev-cstark27/
  • Bug report template: https://forum.xda-developers.com/showpost.php?p=80974289&postcount=2

  • Changelog:
    • Pixel 2/2XL: Enabled 1080p as default Timelapse/enable 4k selection (drop down UI while in Timelapse mode)
    • Pixel 3a/3aXL: Modify Portrait zoom to be the same as other Pixels
    • Pixel 4a 5G/Pixel 5: Enable Astrophotography on Ultra-Wide Angle
    • Add max zoom level option
    • Add NonZSL Frame Count Override option
    • Add Sabre Always On on supported sensors
    • Add an option to disable Sabre (by default, it's enabled only on supported sensors)
    • Add Shasta & Shasta Factor option (experimental setting for Night Sight/Astro)
    • Add countdown to regular Night Sight capture
    • Replace Astrophotography options in drop down menu with permanent Auto/Forced button
    • Fixed photosphere
    • Fixed crash on those devices with wrong resolution on motion photos
    • Fixed slow motion on Pixels
    • Fixed wrong interface being selected at startup randomly (the issue with random wrong zoom buttons or black viewfinder)
    • Adjusted video bar size
    • Unhidden the option for enforced video stabilizations (beta)
    • Fixed artifacts on Sabre
    • Fixed colors on RAWs (for SOME non-Pixels) - now you can read the incorporated profile (thanks Savitar)
    • Cleaned up code

Libpatcher will come later.
Click to expand...
Is this one better than the previous one?
 
S

Speedstershah86

Member
Feb 25, 2016
11
3
Hyderabad
Though I am not supposed to report for Pixel 1 XL but I am delighted to have this new version and it works pretty well... There's just one problem that it crashes on start, but if I long press the icon and start as video, and then switch to camera it doesn't. It would be very kind of you if you could get this fixed.
 
R

romanmpetrenko

New member
Sep 12, 2019
4
3
Pixel 3a XL:
1. Active mode stabilization don't work.
2. Non-zls frames don't work more than 15

Please add to camera:
1. Super res zoom always on
2. Astro more than 4 seconds (up to 12 seconds on 3a xl)
3. Hide awb button function in settings
4. Fix tag (marker) on photos like Night sight/Portrait in Google Photos
5. Force (always on) night portrait (if you can) to best quality

And add russian language to camera

You are the best, very thanks for Camera PX :)
 
Last edited:
  • Haha
Reactions: k0rner
B

Boskoel03

Senior Member
Nov 20, 2010
1,845
605
Vienna,Belgrade
RafatS said:
On Redmi Note 8 Pro:

java.lang.RuntimeException: java.lang.NullPointerException: PX? geVGYAzTuaYCJ
at mtv.run(Unknown Source:41)
at bph.run(Unknown Source:166)
at android.os.Handler.handleCallback(Handler.java:914)
at android.os.Handler.dispatchMessage(Handler.java:100)
at android.os.Looper.loop(Looper.java:224)
at android.app.ActivityThread.main(ActivityThread.java:7551)
at java.lang.reflect.Method.invoke(Native Method)
at com.android.internal.os.RuntimeInit$MethodAndArgsCaller.run(RuntimeInit.java:539)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:995)
Caused by: java.lang.NullPointerException: PX? geVGYAzTuaYCJ
at rpk.d(Unknown Source:8)
at dzo.get(Unknown Source:17)
at rlb.get(Unknown Source:41)
at epa.b(Unknown Source:9)
at dzn.f(Unknown Source:9)
at dzr.get(Unknown Source:29)
at rlb.get(Unknown Source:41)
at dzb.get(Unknown Source:6)
at rlb.get(Unknown Source:41)
at kdj.get(Unknown Source:244)
at rlb.get(Unknown Source:41)
at esk.get(Unknown Source:1520)
at rlb.get(Unknown Source:41)
at rla.get(Unknown Source:76)
at bkp.b(Unknown Source:126)
at bkp.a(Unknown Source:83)
at bus.run(Unknown Source:28)
... 8 more
Click to expand...
Do NOT post about non pixel devices. This is pixel tread.
 
B

Boskoel03

Senior Member
Nov 20, 2010
1,845
605
Vienna,Belgrade
cstark27 said:
PXv8.1.1

An update from @johngalt1, @Urnyx05 and myself.

  • Requirements:
  • OS: Android 10 or 11
  • Device: Google Pixel [2 thru 5] series (please do not post in this thread about non Pixel devices)

  • Download: PXv8.1_GCam-v1.1 .apk
  • Mirror: https://www.celsoazevedo.com/files/android/google-camera/dev-cstark27/
  • Bug report template: https://forum.xda-developers.com/showpost.php?p=80974289&postcount=2

  • Changelog:
    • Pixel 2/2XL: Enabled 1080p as default Timelapse/enable 4k selection (drop down UI while in Timelapse mode)
    • Pixel 3a/3aXL: Modify Portrait zoom to be the same as other Pixels
    • Pixel 4a 5G/Pixel 5: Enable Astrophotography on Ultra-Wide Angle
    • Add max zoom level option
    • Add NonZSL Frame Count Override option
    • Add Sabre Always On on supported sensors
    • Add an option to disable Sabre (by default, it's enabled only on supported sensors)
    • Add Shasta & Shasta Factor option (experimental setting for Night Sight/Astro)
    • Add countdown to regular Night Sight capture
    • Replace Astrophotography options in drop down menu with permanent Auto/Forced button
    • Fixed photosphere
    • Fixed crash on those devices with wrong resolution on motion photos
    • Fixed slow motion on Pixels
    • Fixed wrong interface being selected at startup randomly (the issue with random wrong zoom buttons or black viewfinder)
    • Adjusted video bar size
    • Unhidden the option for enforced video stabilizations (beta)
    • Fixed artifacts on Sabre
    • Fixed colors on RAWs (for SOME non-Pixels) - now you can read the incorporated profile (thanks Savitar)
    • Cleaned up code

Libpatcher will come later.
Click to expand...
Just tnx ,for all your work. 👍
 
You must log in or register to reply here.

Similar threads

petrywilliam
[GCAM MOD] PIXELCAM
Replies
3
Views
1K
P
Pitada72
E
Gcam pinkish pics going nuts realme 6 pro
Replies
1
Views
168
KaMyKaSii
KaMyKaSii
F
Can anyone make GCAM for Galaxy Note FE
Replies
5
Views
11K
matale0
matale0
G
Gcam For Redmi 9T
Replies
0
Views
169
G
gringos.dz
Dinesh D
Need GCam for Sony XZ3
Replies
0
Views
30
Dinesh D
Dinesh D

Top Liked Posts

24 Hours 30 Days All time
  • There are no posts matching your filters.
  • 5
    TechShelter
    TechShelter
    cHECKjAM said:
    Ok so we are abandoned here...
    What dev should we donate to so he/she will continue this work or support the latest GCam software for the original pixel phones..

    If you know one then get him here and let's discuss the pot they need.. Because if this is latest version Im gonna be sad,,
    Click to expand...
    MWP is the only other developer working on Pixel builds to my knowledge but he is mostly focused on Pixel 2 compatibility. He has stated he is aiming for his builds to be usable for later Pixels as well. Unfortunately he didn't seem interested in adding proper support for HDR+ enhanced modes when I suggested it to him, so I'm still sticking with cstark.

    cHECKjAM said:
    On another note.. About settings and recommended settings for the pixel 4a 5g.. Im totally new to gcam and just recently found that HDR enhanced is really nice and makes the pictures beautiful.
    What else is cool to have or recommended depending on situations. Shashta, AWB, NON-ZSL frame count, sabre..
    Those things I have no idea really what they are and what is good to have etc.. Anyone got advice?
    Click to expand...

    AWB = Automatic White Balance. This tries to guess how "cool" or "warm" an image should be rendered. It can help to correct harsh bluish fluoresecent lighting or overly warm incandescent, but sometimes it over corrects in an attempt to create a balanced white. In the evening, I use extremely warm colored lighting in my living room. If I leave AWB on, the photos look like my living room has plain neutral white lighting and doesn't accurate capture the true colors of the scene. The "Auto AWB" mode tries to guess if AWB should be used or not.

    To explain non-ZSL we need to first understand ZSL. ZSL is a special camera mode where the camera is continuously taking full sized photos and stores a number of shots in a circular buffer. When you press the shutter button, you get the photo from the instant the button was pressed (or even before) because the camera was already taking photos. This is used for normal non-hdr modes and hdr+ and helps to make the camera feel more responsive.

    HDR modes capture multiple frames and combine them together to improve dynamic range and average out noise. As mentioned above, HDR+ uses ZSL and uses frames that were captured before you clicked the shutter and is therefore quicker and more responsive. HDR+ Enhanced can use even more frames but doesn't start capturing until the shutter is pressed. So, the non-zsl frame count setting is essentially the number frames to be captured for an HDR+ Enhanced shot. With a high number like 20-30 frames, you get very little noise even in low light situations but it requires a steady camera and a still subject. GCam is smart enough to throw out some frames with movement blur, but it's still preferable to keep movement to a minimum. Google Night Sight is yet another step beyond HDR+ Enhanced. Despite the name, it can be useful for some daytime still scenes with huge amounts of dynamic range.

    Sabre and Shasta info is borrowed from the GCam Hub Troubleshooting page - LINK:

    Sabre is a merge method created by Google that improves photo quality on some modes. Some call it "super resolution" because of the sharpness/detail improvements. It's used by Google for Night Sight, but some GCam mods also use it for zoomed photos and HDR+ Enhanced. Works with the RAW10 format (other RAW formats may result in black photos).

    Shasta or Shasta factor affects the quality of the image, especially in low light. Higher values may help in astrophotography mode. You can also use it to control green noise in the pictures. Astrophotography mode is triggered if the camera is totally motionless in very dark scenes and can do very long exposures (7-8+ minutes)
    View
    2
    C
    cHECKjAM
    Ok so we are abandoned here...
    What dev should we donate to so he/she will continue this work or support the latest GCam software for the original pixel phones..

    If you know one then get him here and let's discuss the pot they need.. Because if this is latest version Im gonna be sad,,
    View
    1
    Berlino
    Berlino
    cvhodl said:
    Hi, I have identified a bug in the latest version of the camera app. When video is selected, the self recording works fine, but the forward video freezes and shows a black screen. I'm using a Pixel 4a 5G, running CalyxOS.
    Click to expand...
    Video recording is working fine for me (back AND front) using latest PX on CalyxOS with P4a5G.

    Try delete settings of px camera or reinstall the app
    View
    1
    TechShelter
    TechShelter
    Combining a wide angle and a telephoto lens doesn't add up to an ultra-wide angle. You'll need to use adapter lenses like Moment or settle for panorama and photosphere stitching. If you check the settings photosphere, there are settings for wide angle stitching and fisheye stitching.
    View
    1
    S
    StiiLe
    If this can helps someone : I'm on Pixel 4a with GrapheneOS, using PXv8.1_GCam-v1.2.apk (cstark27/Urnyx05, 2021-01-25), and GCam Service Provider v1.1 from lukaspieper, it works like a charm. Of course, you can't use "Google Photo" button inside GCam app if you stay in GrapheneOS spirit, but it's unsignificant.
    Thanks for this work, dev.
    View
  • 172
    cstark27
    cstark27
    Project Status
    As you may have noticed or seen in my sporadic posts here, Camera PX development has been non-existent for quite some months now. This is mainly due to a lack of substantial updates within Google Camera, but also due to lack of interest in the project as other things in our lives have become more important. As each new Google Camera version is released, the modifications have to be re-done from scratch so this would take quite some time as we only get to do this in our "free" time after work and spending time with our families. We do hope the Pixel 5 release brings some new/interesting things to the table but that is yet to be seen, and the passion to restart the project is also yet to be seen. For now, we are releasing a minor update to "support" Pixel 4a's but since Google Camera 7.2 was not built with Pixel 4a's in mind, you may notice a quality difference than your stock camera.
    Click to expand...

    Disclaimer
    This has turned into a collaboration between @back.rider555, @johngalt1 and myself. We do this in our free time, when able, to bring newer Pixel features and mods to your older device.
    Click to expand...

    Introduction
    This is a Google Camera mod for the Pixel phones. The main goal is to bring newer features to older Pixels, where possible.

    What is Google Camera (AKA GCam)?

    Google Camera is the camera app for the Google Nexus and Google Pixel phones. It is not designed or intended to be run on other phones.

    What is HDR+?

    Basic: HDR+ is Google's proprietary image processing routine, and is more than just traditional "HDR' modes. HDR+ employs image stacking to control exposure, and also to preserve details, reduce noise, increase sharpness, etc. It is an all-in-one package.

    Advanced: https://ai.googleblog.com/2014/10/hdr-low-light-and-high-dynamic-range.html

    Google Camera Features

    Pixel 1
    • Zero Shutter Lag (ZSL) HDR+ - The Pixel 1 introduced ZSL HDR+ which means when you open the camera, the system utilizes the Hexagon DSP to constantly buffer frames and marks the time slot of when you pressed the shutter button.
      * -- Quote from Marc Levoy via The Verge:
      "The moment you press the shutter it's not actually taking a shot — it already took the shot," says Levoy. "It took lots of shots! What happens when you press the shutter button is it just marks the time when you pressed it, uses the images it's already captured, and combines them together."
      It's a major usability improvement on the HDR+ mode in last year's Nexus 6P and 5X. "What used to happen last year is you'd press the shutter button and you'd get this little circle going around while it captured the images you need for the burst; now it's already captured those," says Levoy. "And that's big, because that means that you can capture the moment you want."
      * -- https://www.theverge.com/2016/10/18/13315168/google-pixel-camera-software-marc-levoy

    Pixel 2
    • Portrait Mode - Simulates bokeh for improved subject separation from the background. The front camera of the Pixel 2 only provides Portrait Mode when a human face is detected, and the rear camera can work on an object, an animal, a human, etc because it uses information from the Dual Pixel PDAF sensor to detect depth. Google Camera ports for non-Pixel phones can NOT do this so all ports for non-Pixel phones utilize the front camera technique for both front & rear (which means all ports for non-Pixel phones can only properly apply bokeh when a human face is detected).
      * -- Advanced read: https://ai.googleblog.com/2017/10/portrait-mode-on-pixel-2-and-pixel-2-xl.html
    • Motion Photos - Provides short clips of moments before and after you take the photo.
      * -- Advanced read: https://ai.googleblog.com/2018/03/behind-motion-photos-technology-in.html

    Pixel 3
    • Top Shot - When Motion is set to Auto or On, Pixel will recommend a better photo to you if it detects one. Like if you captured a photo when someone blinked.
      * -- Demo:
    • Photobooth - Automatically capture a photo when Pixel detects a silly face or a smile.
    • Super Res Zoom - Enhances zoomed picture quality by purposely shifting the camera module using OIS (Pixel 3 only) to gather more data.
      * -- Advanced read: https://ai.googleblog.com/2018/10/see-better-and-further-with-super-res.html
    • Motion Metering - On the Pixel 3 Motion Metering is used in the "default photo mode" to detect subject motion and if it detects enough motion, Pixel will shoot with a faster shutter speed to reduce subject blur. The Pixel 1 and 2 get to use this in Night Sight only.
      * -- Further reading (about 1/3 down the article): https://ai.googleblog.com/2018/11/night-sight-seeing-in-dark-on-pixel.html
    • Synthetic Fill Flash - Pixel 3 will brighten faces in selfies.
    • Tracking Autofocus - Tap on a subject or area to keep focus when the subject or phone moves.
    • Learning Based White Balance - Google's attempt to fix white balance for low light photos. Used in Night Sight and HDR Enhanced on the Pixel 3.
      * -- Further read (about 1/2 down the article): https://ai.googleblog.com/2018/11/night-sight-seeing-in-dark-on-pixel.html
    • Portrait Mode Learned Depth - Pixel 3 improves the rear camera Portrait Mode depth detection for more consistent and more pleasing bokeh.
      * -- Advanced read: https://ai.googleblog.com/2018/11/learning-to-predict-depth-on-pixel-3.html
    Click to expand...

    Installation instructions
    Root is NOT needed.
    * -- Download APK to your Phone (or PC then transfer to your phone)
    * -- Locate APK with File Manager and Install
    * -- You will be prompted to Allow Unknown Sources. This is normal for APK's not downloaded from the Play Store.
    Click to expand...

    Download
    PXv8.1_GCam-v1.2.apk

    See optional Magisk modules in Post 2 below.

    Alternative download location (thanks to @s4turno):
    https://www.celsoazevedo.com/files/android/google-camera/dev-cstark27/

    Previous Versions:

    PXv4.5_GoogleCamera_7.2.014.apk

    PXv4.3_GoogleCamera_7.2.014.apk

    PXv4.2_GoogleCamera_7.2.014.apk

    PXv4.1_GoogleCamera_7.2.014.apk

    PXv4.0_GoogleCamera_7.2.014.apk

    PXv3.3.1_GoogleCamera_7.2.010.apk

    PXv3.3_GoogleCamera_7.2.010.apk

    PXv3.2_GoogleCamera_7.2.010.apk

    PXv3.1_GoogleCamera_7.2.010.apk

    PXv3.0_GoogleCamera_7.2.010.apk

    PXv1.1_GoogleCamera_6.3.020.apk

    PXv1.0_GoogleCamera_6.3.020.apk

    P3v12.6_GoogleCamera_6.2.030.apk

    P3v12.4_GoogleCamera_6.2.030.apk

    P3v12.3_GoogleCamera_6.2.030.apk

    P3v12.2_GoogleCamera_6.2.030.apk

    P3v12.1_GoogleCamera_6.2.030.apk

    P3v12_GoogleCamera_6.2.030.apk

    P3v11.4.31_GoogleCamera_6.2.024.apk

    P3v11.4.2_GoogleCamera_6.2.024.apk

    P3v11_GoogleCamera_6.2.024.apk

    P3v10.1_GoogleCamera_6.1.021.apk
    -Add Xlib2 (another reduced contrast option) and modify to support Pixel 3 Portrait bokeh on Pixel 2
    -Add Portrait and Night Sight App Shortcuts from back.rider555

    Known Issues on Android 8.1:
    -Tapping to focus breaks autofocus. Exiting camera or switching modes/cameras fixes this.
    -Night Sight will crash the very first time you use it after installation. It appears to run just fine after that until you Clear Data of the app.

    P3v9.1_GoogleCamera_6.1.021.apk
    -Disable HDR+ mode resetting for Pixel 1 when opening Camera
    -Add "reduce contrast" option which loads a custom lib by Savitar to reduce black crush a little bit. I have not tested in all conditions. Feel free to test at your own discretion and provide your thoughts with comparison pics.

    Known Issues on Android 8.1:
    -Tapping to focus breaks autofocus. Exiting camera or switching modes/cameras fixes this.
    -Night Sight will crash the very first time you use it after installation. It appears to run just fine after that until you Clear Data of the app.

    P3v9_GoogleCamera_6.1.021.apk
    -Revert default color accent to Google Blue by popular request
    -Fix HDR+ mode resetting for Pixel 1
    -Exif fix (big thanks to @Arnova8G2 for helping)
    -Fix Night Sight for Android 8.1 (big thanks to BSG)

    Known Issues on Android 8.1:
    -Tapping to focus breaks autofocus. Exiting camera or switching modes/cameras fixes this.
    -Night Sight will crash the very first time you use it after installation. It appears to run just fine after that until you Clear Data of the app.

    P3v8.6_GoogleCamera_6.1.021.apk
    -Change default color accent to Google Green
    -Add P3 Mod Settings>Permanent Night Sight Suggestion
    --Provides an always on button to enter Night Sight
    -If P3 Mod Settings toggles are changed, the camera will restart automatically to apply the changes (be careful if HDR+ is Processing) (thanks @fu24 / namok)
    Known Issues on Android 8.1:
    -Tapping to focus breaks autofocus. Exiting camera or switching modes/cameras fixes this.
    -Night Sight will crash the very first time you use it after installation. It appears to run just fine after that until you Clear Data of the app.
    -Night Sight viewer is black. There is a fix for this but then it requires Flash to be set to Auto/On for it to work properly. I don't use Flash ever so this is not a good option to me at the moment. I opted for the black screen until a fix can be found. Thanks for understanding. Wait until the focus ring is gone, or choose your focus in the Focus Option on the top right, then click the photo.

    P3v8.5_GoogleCamera_6.1.021.apk
    -Cleaned up P3 Mod Settings. Settings not relevant for Android 8.1 are removed, and PVC toggle is removed for non-Pixel 2/3.
    -Add P3 Mod Settings>HDR+ Enhanced for Portrait toggle. This increases dynamic range, at the cost of shutter delay. Force close the app is required for the setting to change. (Credit to BSG for the method)
    -Tried to adjust some stuff for Wear remote shutter support but I need a proper log if there's issues still.

    P3v8_GoogleCamera_6.1.021.apk
    Must uninstall old version due to signature change.
    -Support for Android 8.1 (referenced BSG's latest versions)
    -Settings>P3 Mod Settings
    --Toggles to switch Photo viewers (Classic or Google Photos), Enable Pixel Visual Core for ZSL HDR+, Disable Learning Based AWB in HDR Enhanced, & Disable Tracking Autofocus. The last 2 options only work on Android 9, so the toggles don't do anything for Android 8.1
    Known Issues on Android 8.1:
    -Tapping to focus breaks autofocus. Exiting camera or switching modes/cameras fixes this.
    -Night Sight will crash the very first time you use it after installation. It appears to run just fine after that until you Clear Data of the app.
    -Night Sight viewer is black. There is a fix for this but then it requires Flash to be set to Auto/On for it to work properly. I don't use Flash ever so this is not a good option to me at the moment. I opted for the black screen until a fix can be found. Thanks for understanding. Wait until the focus ring is gone, or choose your focus in the Focus Option on the top right, then click the photo.

    P3v7_GoogleCamera_6.1.021.apk

    P3v6_GoogleCamera_6.1.013.apk
    Uninstall old version. This has a different package name (to fix Lens). The new app is in your app drawer labeled CameraP3.
    -Lens option in More
    -Pixel 3 Portrait mode (which seems to only improve the rear lens Portraits, so no improvement on Pixel 1 probably)
    -Removed HDR+ Options for now due to bugs/instability/confusion

    Only tested on Pixel 2. I don't have a Pixel 1 to test with to offer fixes for.

    P3v5_GoogleCamera_6.1.013.apk
    -Add workaround for Pixel 1 rear Portrait (only works on human faces)
    Previous changelog:
    For all Pixel:
    -Enable Night Sight
    -Enable manual focus button in Night
    -Add HDR+ Config selection

    Tested only on Pixel 2:
    -Enable focus tracking
    -Enable Photobooth
    -Video FPS options (Auto/30/60)
    -Google Lens Suggestions in Viewfinder
    -H265/HEVC toggle
    -Super Zoom (maybe??)
    -"New" HDR+ Enhanced (colors may differ in extreme tinted light conditions, test it out; this is how the Pixel 3 behaves see https://www.teknofilo.com/analisis-pixel-3-xl/4/)

    P3v4_GoogleCamera_6.1.013.apk
    For all Pixel:
    -Enable Night Sight
    -Enable manual focus button in Night
    -Add HDR+ Config selection

    Tested only on Pixel 2:
    -Enable focus tracking
    -Enable Photobooth
    -Video FPS options (Auto/30/60)
    -Google Lens Suggestions in Viewfinder
    -H265/HEVC toggle
    -Super Zoom (maybe??)
    -"New" HDR+ Enhanced (colors may differ in extreme tinted light conditions, test it out; this is how the Pixel 3 behaves see https://www.teknofilo.com/analisis-pixel-3-xl/4/)
    Click to expand...

    FAQ
    Q: "I already have a Pixel, why do I need to use a GCam mod?"
    A: Here are the added benefits of Camera PX:
    • All Pixels:
    • Ability to choose Camera, Portrait, or Night Sight as the default mode
    • Custom Lib options to reduce black crush, improve details, and/or increase clarity
    • Ability to choose 4K Time Lapse quality
    • Ability to choose zoom level in Portrait Mode of 1.2x or 2.0x (for the rear camera)
    • Ability to choose to enable HDR+ Enhanced for Portrait Mode
    • Option to have quicker access to Night Sight by "permanently" adding the little message at the bottom regardless of measured light (admittedly it disappears if you capture a photo in regular mode)
    • Option to increase shutter speed and frames in Night Sight for potentially "better" Night Sight photos
    • Option to disable the "Learning AWB" in HDR+ Enhanced/Night Sight
    • Option for manual shutter speed & ISO
    • Face warping is completely disabled

    In addition to the above, these are the added features for specific devices (when compared to the stock app):

    • Pixel 1:
    • Portrait Mode (only when a "human face" is detected, does not work on objects/animals like Pixel 2, 3, 3a)
    • Removes the HDR+ mode reset on launch or when leaving settings
    • Synthetic Fill Flash (brightens faces when there is a strong backlight)
    • Motion Photos & Top Shot (if you have the correct Google Photos APK installed)
    • HEVC option
    • Photobooth
    • Adds focus button in Night Sight (Auto/Near/Far)
    • Tracking Autofocus in Photo mode
    • Super Res Zoom sharpening algorithm

    • Pixel 2:
    • "Learned Depth" for Portrait Mode which provides, usually, a more accurate depth detection and more pleasing bokeh
    • Synthetic Fill Flash (brightens faces when there is a strong backlight)
    • Top Shot (if you have the correct Google Photos APK installed)
    • HEVC option
    • Photobooth
    • Adds focus button in Night Sight (Auto/Near/Far)
    • Tracking Autofocus in Photo mode
    • Super Res Zoom sharpening algorithm

    • Pixel 3:
    • -Adds 60ps option to top bar in Video mode

    • Pixel 3a:
    • Synthetic Fill Flash (brightens faces when there is a strong backlight)

    Q: Do I need to change any settings?
    A: This mod is optimized for the Pixels to run without changing any settings. There are some advanced settings in P3 Mod Settings. Experiment at your own will.

    How to get Top Shot working?
    A: https://forum.xda-developers.com/showpost.php?p=78186764&postcount=726
    Click to expand...

    Thanks To/Credits
    B-S-G for fixes for Android 8.1
    Arnova8G2 for general help and other fixes as he comes up with them
    Click to expand...

    XDA:DevDB Information
    [GCam] Camera PX for Google Pixel 1 / 2 / 3 / 3a / 4, App for all devices (see above for details)

    Contributors
    cstark27, back.rider555, johngalt1

    Version Information
    Status:     Beta

    Created 2018-12-05
    Last Updated 2020-09-03
    View
    152
    cstark27
    cstark27
    PXv3.0

    PXv3.0_GoogleCamera_7.2.010.apk
    Mirror: https://www.celsoazevedo.com/files/android/google-camera/dev-cstark27/

    As tested on a Pixel 2 (but mods were applied in a universal manner):

    * Enable Astro mode for Pixel 1 & 2 (instructions (thanks @ins0mniac): https://forum.xda-developers.com/showpost.php?p=80678229&postcount=1507)
    * Enable Focus options in Night Sight (along with "infinity" - may be same as far)
    * Modded lib for Learned Depth in Portrait Mode (Pixel 2)
    * Enable Super Res Zoom while zoomed or in Night Sight (no zoom required) - this is like Pixel 3 stock
    * Enable auto timer (photobooth), it's in the selfie camera in the Timer options
    * Enable synthetic fill flash for Pixel 2 and enable SFF in Camera mode for 3a

    More advanced options/features to come later, please don't ask about them...For now it's a quick mod for those who want an "upgraded stock"-like app for their Pixel 1 or 2.
    View
    137
    cstark27
    cstark27
    PXv4.0

    Attention Pixel 2 users (and maybe Pixel 1, 3, 3a): it has been discovered that the Super Res Zoom Always On toggle that is enabled by default can cause undesirable effects in shadows and high contrast areas. It is advised to disable this option until an adjustment comes with a newer APK to separate the (2) included functions.

    Hello guys. So this one is a bit exciting because @back.rider555, @johngalt1, and I were able to collaborate on this and deliver a mod with almost all previous features, some new ones, and as much support as we could muster and test for.

    • Requirements:
    • OS: Android 9 or 10
    • Device: Google Pixel series (some other devices may work, but are not supported in the traditional sense - please do not post in this thread about non Pixel devices)




    • Changelog: Initial release based off Google Camera 7.2.014. Supported features are shown in the image below. "Default" means your stock app already has this feature; "Y"/"OK" means this was added to the listed device; "N/A"/"Disabled" means the feature could not be enabled for the listed device, either because of unsolved crashes, missing hardware, or messing up a fundamental function.
      An extra shout out to marcello for the initial Lib Patcher, further implemented and tweaked by johngalt1, and Urnyx05 for some Android 9 fixes.

    Some notable features:

    Hold the camera switch icon for quick access to settings.

    Lib Patcher: this can be used to modify certain parameters like sharpness and noise removal amount. The settings here will depend on what you like, there is no "best" setting. Please read the info in "Learn More" within the app under the enable button.

    The max exposure setting can be adjusted but does not mean it will always choose this shutter speed. GCam will automatically detect certain parameters and choose the most optimal shutter speed. A stock Pixel 1 supports up to 2s, Pixel 2 up to 4s, Pixel 3/3a up to 12s, Pixel 4 up to 30s. Using Magisk Modules in post #2 can make this longer, but Google decided on 16s due to star trails and the perception of blur being about the limit around 16s. By default, this APK selects 12s for Pixel 3 and 3a as those devices support higher exposure times than the stock APK allows for Astro.

    There are 2 buttons that can be added to Night Sight. Forced Astro mode, and Light Painting Mode. Use a tripod or tripod-like structure for Light Painting Mode or if the scene is really dark. Handheld will not be good.
    View
    99
    cstark27
    cstark27
    PXv4.3

    An update from @back.rider555, @johngalt1, and myself.

    • Requirements:
    • OS: Android 9 or 10
    • Device: Google Pixel series (please do not post in this thread about non Pixel devices)




    • Changelog:
      • Add "PX" to EXIF software tag to help differentiate photos from PX Mod
      • Enable HDR+ Enhanced on Pixel 4 (turn on in Settings>Advanced)
      • Add manual exposure slider which will hide when appropriate. You must enable the slider in PX Mod Settings>Manual Exposure Control near the bottom. You must use Night Sight, Portrait Mode (with PX Mod Settings>Portrait HDR+ Enhanced), or Camera Mode (use HDR+ Enhanced).
    View
    73
    cstark27
    cstark27
    PXv4.1

    An update from @back.rider555, @johngalt1, and myself.

    • Requirements:
    • OS: Android 9 or 10
    • Device: Google Pixel series (some other devices may work, but are not supported in the traditional sense - please do not post in this thread about non Pixel devices)




    • Changelog:
      • Adjusted SRZ Always On toggle and added Forced Merge Method option, to fix quality issues with certain devices. Forced Merge Method is not recommended and may degrade quality on some devices in certain high contrast scenes.
      • Enabled horizon level
      • Manipulate Non-ZSL Frame Count setting to allow up to 45 frames (more is not always better though)
      • "Tone Curve" added to Lib Patcher settings to adjust contrast/highlights/shadows (click Tap Here to Learn More for help)
      • Fix face warping bug on rear camera
      • Code cleanup and preferences cleanup
    View

New posts

Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone