Has anyone here used Bigkaka's AGC gcam? I get 2-3 second delay before it takes pictures. Is there a workaround for that?
Themes / Apps / Mods Gcam Discussion Thread
- Thread starter Laptapper
- Start date
With your posted config the picture is black and white!?
But I've compared fresh install of AGC without changing the standard setting to lmc @antykat
@ all What's your opinion?
Attachments
I've found two configs for bigkaka, one as said above b/w and one more attached
Samples and config attached
Attachments
Did u remove custom libs, etc? had this problem too, as somewhere in another folder was laying a .so
Or, i dont know if that helps, try a different vendor package, maybe that Samsung or ruler3d one.
Also thanks for your comparison, and have to say agc is imho. the winner. Better sharpness, more details better overall color profile... Just the mirroring on your table says everything when it comes to details on non-zoom, just from the preview.
Edit; For bigkaka: had this B/W "problem" too once again. Did wipe data+cache (of Camera App, dont wipe your phones lol), reload config, and also make sure to select the right profile. (Profile 4 is BW (lens?) with out AWB iirc.)
Attaching my Config from 'as is' too.
Last edited:
because the lens colour model is set to monochrome. I also tested that setting at the time and it was wrong.
I'm following this channel for more than 6 months. However, I still haven't found a "set" ( apk + configs + libs) for everyday use. Let me explain what I mean with that, great photos in daylight ( most of the sets are excellent in that), good portrait and video ( most of the cases have a problem with slomo) and the most important but also the most difficult excellent ( or as could as they can get ) night photos. So a question to the older members like @Laptapper but even the newer ones. What set do you use for everyday use?
*Sorry for the bad English it's not my first language
*Sorry for the bad English it's not my first language
In your experience, do agc gcam's take pictures instantly or is there a few second delay?
It has less delay, yes, depends on which Options and also profile (not config) u choose at bigkaka. With less modes at "auto" its more snappy is my feeling. It has a few flaws, like the background processing takes 1-4~ seconds, but the wait is (unfortunately) rewarded in the end. Would also wish the mod would be a little more reactive for snapshots, where all the details do not magically disappearing like other mods who focus on speed only over close to crystal clear details. This sensor has more to offer. 
Edit: Just noticed a BK 9.3 popped up.
Edit2: AGC8.6.263_V2.0 with the fix-v2 config looks like as it has aloooot potential. Its less laggy too, even with <10% battery. Needs deeper testing and a bit more tweaking from the pros around here is my opinion, and it has the potential to beat some flagships.
Edit: Just noticed a BK 9.3 popped up.
Edit2: AGC8.6.263_V2.0 with the fix-v2 config looks like as it has aloooot potential. Its less laggy too, even with <10% battery. Needs deeper testing and a bit more tweaking from the pros around here is my opinion, and it has the potential to beat some flagships.
Last edited:
I've found a good config for AGC with an huge potential to get the best config for AGC
ottili81
Senior Member
Configs (xml + lib) for Redmi Note 10 Pro and LMC8.4 R15.
About the configs:
The xml was adopted from Xiaomi 11T Pro. I hope that everything works properly. It wasn't tested on custom/GSI roms.
Xml:
⚛️antykat_v2_LMC_RN10Pro.xml
drive.google.com
The xml must be used with my lib (link below):
https://drive.google.com/file/d/16RqcPkZTDytSzABwmopo3UHzetIynxpt/view?usp=drivesdk
How to use the xml and the lib:
1. Put the lib into folder:
/LMC8.4/libs
2. Put the xml into folder:
/LMC8.4
3. Double tap at the black area between shutter button and gallery to load the xml.
The lib is loaded automatically by the xml, if the lib is in right folder.
Creator: @antykat
--------------------
LMC8.4_R15 apk:
https://drive.google.com/file/d/11jYm-bHmSQit8RgPCVYqpaWeN-dxVDhO/view?usp=drivesdk
For your knowledge, antykat libs 8.4
can be also used in AGC 8.4
Thanks @antykat for his good work
Fully agree what you wrote. I also would like to thank antykat and all the others that work on GCam configurations and share it here. Making a camera-app so much better working. Thank's alot !!!
Thanks, will give it a try. Also might throw some libs at too.
Personally im not a huge Fan (yet) of that Version, will uninstall and go back to AGC8.4.300_V9.2, also giving the 9.3 a shoot or two.
Damn, u havent promised too much, brutal this config. Thanks for sharing.
Personally i found my Daily Driver now, BigKaka 8.4 - v9.2 and this Config u found, im finally done with testing. Time to move into Custom Roms now, Thanks again. ;D
Edit: Argh... A tiny bit later comes another new Version: AGC8.4.300_V9.4,..
Last edited:
Configs (xml + lib) for Redmi Note 10 Pro and LMC8.4 R15.
Changes:
- Further improvements in sharpening
- Changes in luma and luma denoising
- Some other changes
About the configs:
Very detailed photos without over sharpness from all cameras
Close to real colours from Main camera
Natural looking photos
Sat 1 and Sat 2 modes for more saturated photos from Main camera
Upscaling is set to x2 for all cameras
Turn on AWB in Night Sight mode to get accurate colours
Xml:
drive.google.com
Lib:
drive.google.com
How to use the xml and the lib:
1. Put the lib into folder:
/LMC8.4/libs
2. Put the xml into folder:
/LMC8.4
3. Double tap at the black area between shutter button and gallery to load the xml.
The lib is loaded automatically by the xml, if the lib is in right folder.
Made on Xiaomi 11T Pro
Creator: @antykat
--------------------
LMC8.4_R15 apk:
https://drive.google.com/file/d/11jYm-bHmSQit8RgPCVYqpaWeN-dxVDhO/view?usp=drivesdk
Changes:
- Further improvements in sharpening
- Changes in luma and luma denoising
- Some other changes
About the configs:
Very detailed photos without over sharpness from all cameras Close to real colours from Main camera Natural looking photos Sat 1 and Sat 2 modes for more saturated photos from Main camera Upscaling is set to x2 for all cameras Turn on AWB in Night Sight mode to get accurate coloursXml:
⚛️antykat_v3✨_LMC_RN10Pro.xml
drive.google.com
Lib:
⚛️antykat_v6✨_GCams_8.4.so
drive.google.com
How to use the xml and the lib:
1. Put the lib into folder:
/LMC8.4/libs
2. Put the xml into folder:
/LMC8.4
3. Double tap at the black area between shutter button and gallery to load the xml.
The lib is loaded automatically by the xml, if the lib is in right folder.
Made on Xiaomi 11T Pro
Creator: @antykat
--------------------
LMC8.4_R15 apk:
https://drive.google.com/file/d/11jYm-bHmSQit8RgPCVYqpaWeN-dxVDhO/view?usp=drivesdk
Last edited:
Here you're sharing V5 and telegram V6?Configs (xml + lib) for Redmi Note 10 Pro and LMC8.4 R15.
Changes:
- Further improvements in sharpening
- Changes in luma and luma denoising
- Some other changes
About the configs:
Xml:
https://drive.google.com/file/d/16kM02JZ1zX2V2k1H6a50b4LGxzF3K0Nh/view?usp=drivesdk
https://drive.google.com/file/d/16evNbxZffByom3eoUZC4ZlDcqXe7zvX_/view?usp=drivesdk
How to use the xml and the lib:
1. Put the lib into folder:
/LMC8.4/libs
2. Put the xml into folder:
/LMC8.4
3. Double tap at the black area between shutter button and gallery to load the xml.
The lib is loaded automatically by the xml, if the lib is in right folder.
Made on Xiaomi 11T Pro
Creator: @antykat
--------------------
LMC8.4_R15 apk:
https://drive.google.com/file/d/11jYm-bHmSQit8RgPCVYqpaWeN-dxVDhO/view?usp=drivesdk
No
I edited previous version description, in the mid time I did something and later copied wrong, unedited description 
I'll fix it soon. Sorry.Edit: DONE
Last edited:
Similar threads
Top Liked Posts
-
1
I am impressed with this great work. I will continue testing it on a daily basis. Suggestions: Fix lens distortion in ultrawide mode.
PixelGod standard HDR comparisom with Xiaomi 11T Pro1
Dear XDA GCam members,
I wanted to explain why I chose to provide the direct XML files with all the changes visible instead of hiding them behind a lib. The reason is simple: I wanted to make sure that the changes I made were accessible to everyone in the community.
By sharing the direct XML files, I hope that others can learn from the changes I made and use them to improve their own GCam setups. I believe that transparency and sharing knowledge is key to the growth and success of our community.
I also want to encourage all members to explore the libpatcher and learn from the values that have been changed. Together, we can continue to improve the GCam experience for everyone.
Thank you for your attention and I look forward to seeing what we can achieve together.
Best regards,1
Making a lib you can:
- share it for many various devices
- use with all kinds of cameras
- use with many GCams based on the same version of Google Camera
- use a few various libs with one base xml according to your preferences, so you can collect libs good for every camera and you don't have to use a few xmls and switch between them
- for me personaly, libs make creating configs much easier and safe a lot of time, because I make configs for a few GCams and devices. I dont have to set libpatchers separately for every GCam and camera
- libs are universal and useful. Can I use your xml with AGC? NO. Can you use my lib with AGC? YES
- most people don't care what values are in libpatcher. They load xml/lib and expect good results
So, please, don't suggest bad intentions to anybody saying about "hiding" anything. It's not nice
1
Hey I've recognized that your XML isn't yours, why you didn't tell that it's mainly from Prashant?
@antykat
Go on with lib. Thanks1
Because he has nothing to hide
He wrote:
"I have created a custom GCam XML for LMC R15 that focuses on capturing raw details instead of gimmicking color and saturation changes."
Not nice again. -
9Configs (xml + lib) for Redmi Note 10 Pro and LMC8.4 R15.
Changes:
- New, rebuilt Sat 1 and Sat 2 modes
- Improved Macro camera
About the configs:
Works on both (64 and 108 MP) variants
Detailed photos without over sharpness from all cameras
Close to real colours from Main camera
Sat 1 and Sat 2 modes for more saturated and contrasted photos from Main camera
Upscaling is set to x2 for all cameras.
Turn on AWB in Night Sight mode to get more accurate colours
Xml:
⚛️antykat_v4_LMC_RN10Pro.xml
drive.google.com
The xml must be used with my v6 lib (link below):
⚛️antykat_v6✨_GCams_8.4.so
drive.google.com
How to use the xml and the lib:
1. Put the lib into folder:
/LMC8.4/libs
2. Put the xml into folder:
/LMC8.4
3. Double tap at the black area between shutter button and gallery to load the xml.
The lib is loaded automatically by the xml, if the lib is in right folder.
Made on Xiaomi 11T Pro
Creator: @antykat
--------------------
LMC8.4_R15 apk:
LMC8.4 R15.apk
drive.google.com
7
Checkout the laptapper darkxstaar package with Gcam lib and XML
Install APK, open, import lib, import XML, restart the app, success
(It's v9 and in my opinion with this config better as V10)
Attached also the antykat fix3 @christophebeuvry6I have created a custom GCam XML for LMC R15 that focuses on capturing raw details instead of gimmicking color and saturation changes. No lib is needed . You can download the XML from the link below and try it out for yourself. I hope you enjoy it!5I've compared some cams
Lmc with antycat lib XML and my better settings for evening
HDR+
HDR+enhanced
Leica cam (very unnatural comparing with real view)
With led flash
Agc Cam
HDR+
Sgcam 8.7 with from @Darkxstaar (thanks) hisself kanged lib and XML with my evening settings
HDR+
For me HDR+ is favorite in case of fast shot.
Sgcam 8.7 is looking a bit noisy but best details and I think it could be improved to the best pic.
@nstream I didn't use led flash in case of not needed and flash reduces quality of far objects (also leica with flash produced bad over all details)
Led flash only needed in absolutely no light conditions....but for me it's useless in case of I've had no situation in no light to fotograph...5 -
2720220901 Thread cleaned
In case of deleted files from users in my editable folder, test ended here.
I've followed the moderator suggestion about the sharing and the XDA rules, although I don't like to share with non XDA members.
This first post is now with a link to GDrive with shared xmls and libs
I've adjusted this folder that everyone can modify files inside.
Please don't delete files, otherwise the test with the editable shared folder ends.
Laptapper XDA gcam - Google Drive
drive.google.com
The both root documents are editable by everyone....26My final final KAIRU XML (?)
This might just be my very last XML if no problems are found. (For LMC R12 Fix)
Changelog:
Reduced the green tint on low-light (if it still persists then turn on AWB).
Sharper and reveals even more details.
Tuned the Wide camera and also fixed the distortion by changing the interface model, turns out it fixes the distortion only after capturing the image.
Added a subtle but very nice beauty mode "
". It is very nice especially on portrait shots / human shots because it hides a bit of the imperfections (but not too much like what a TikTok filter would). And has the same color profile as the Main lens. I also recommend this mode for a very good low-light or maybe even night pictures because it has very low noise
Please give it a try!2120220830 Moderator Information
20220901 Moderator Information
TL;DR: all sharing must be happening on XDA or use XDA as major platform
Wall of Text
Thanks for reading this wall of text. Hope you all have a good time developing!20Sharing my personal config, arrived at after months of testing and tweaking:
- For BSG MGC_8.1.101_A9_PV4, no library needed
- Tested on M2101K6G (sweet)
- Based on jeneeek's config (heavily tweaked for reduced noise, more accurate colours, better dynamic range)
- All cameras configured (main, ultrawide, macro, front)
Includes stabilised 4k video recording for all cameras (though GCam stabilisation isn't as good as on stock MIUI app)- Photos are sharp and detailed, while still looking natural (no oversharpening halos etc)
- Colours are natural and accurate but more punchy than stock (especially in low light)
If you prefer instant photos you can turn off HDR+ Enhanced, but I recommend keeping it on as it gives you improved noise management in main cam, better preserved highlights in ultrawide, and more detail in macro/front at the cost of ~1 sec shutter time. Test for yourself if it's worth it.
ISSUES:
- No distortion correction in ultrawide
- In some cases Night Sight photos may be more noisy than optimal
- Viewfinder may get too dark to see well at night, you can turn on OpenGL preview to fix this
This is a work in progress, so let me know what you think!14hi guys
this is the SACHISK MIXED xml with main lens and front cam from KAIRU FINAL -0-.
in other words, all of Kairu's main lens natural and definition settings entered into Sachisk's XML. So we have the main camera from Kairu, and the rest (ultrawide lens and video recorder and other configs) from Sachisk. for LMC 8.4 x9s.
i could not change AWB settings, so the main camera has all the settings from Kairu without AWB. AWB settings from Sachisk.
from my last 3 2 and a half months, a LMC x9s is really quite stable, and an XML SACHISK MIXED presented the best compromise between functionality and good quality so far. I decided to mix the best of Kairu with the best of Sachisk according to my opinion.
New posts
-
-
Lineage OS for Unihertz Titan? (a Blackberry Option)- Latest: Rumplestilzken
