I'll test....
If someone else too, be sure that antykat V5 is set in lib patcher.
@godfather01020
Did you saved your XML with setup the V5 in lib, because for me google lib is chosen in your XML?
Themes / Apps / Mods Gcam Discussion Thread
- Thread starter Laptapper
- Start date
I'll test....
If someone else too, be sure that antykat V5 is set in lib patcher.
@godfather01020
Did you saved your XML with setup the V5 in lib, because for me google lib is chosen in your XML?
Made a update on the MGC Conf, would highly appreciate some feedback. Im in love with the Focus, 10x Zoom results. 
github.com
GitHub - itsXactlY/RedMi-Note-10-Pro-MGC
Contribute to itsXactlY/RedMi-Note-10-Pro-MGC development by creating an account on GitHub.
github.com
Remove the ".zip" extension from this file because xda doesn't allow putting ".so" and put it in the libs folder, the XML should automatically take the lib.
Great job!Configs (xml + lib) for Redmi Note 10 Pro and LMC8.4 R15.
Changes
Improved all cameras:
- new, rebuilt lib
- some changes in the xml
About the configs
Very detailed photos without over sharpness from all cameras
Xml:
⚛️antykat_v5✨_LMC_RN10Pro.xml
drive.google.com
The xml must be used with my v8.Natural lib (link below):
https://drive.google.com/file/d/18w3yon_pAEt5T0bfC9aLklsybpiCaXEP/view?usp=drivesdk
LMC apk:
LMC8.4 R15.apk
How to use the xml and the lib
1. Put the lib into folder:
/LMC8.4/libs
2. Put the xml into folder:
/LMC8.4
3. Double tap at the black area between shutter button and gallery to load the xml.
The lib is loaded automatically by the xml, if the lib is in right folder.
Creator: @antykat
I am very pleased with camera.
It is not better than sotck cameraMade a update on the MGC Conf, would highly appreciate some feedback. Im in love with the Focus, 10x Zoom results.
GitHub - itsXactlY/RedMi-Note-10-Pro-MGC
Contribute to itsXactlY/RedMi-Note-10-Pro-MGC development by creating an account on GitHub.
Thank you for testing. What did u use as ur Stock Cam? As its a bit sharper overall, still struggling a bit to get it also that sharp, with a few other issues i found in Darklightning, etc...
Maybe have to drop MGC, and move on again, haha
stock miui 14 (4.5.002250.1)Thank you for testing. What did u use as ur Stock Cam? As its a bit sharper overall, still struggling a bit to get it also that sharp, with a few other issues i found in Darklightning, etc...
when did MIUI 14 arrive?
Is your device a Redmi Note 10 Pro (Global)?
Mine still haven't received =/
Random xmls for backup and for you guys to try out since I'm trying out the new myui port from edge 30 ultra
Lmc alisa r15 is nice one
Also the stark hdr++ one is for gcam8.1
4pda human skintone is good for skintone
Pixelgodx3 is in testing:
Changelog:
1. Brighter photos even with exposure compensation off.the exposure compensation sometimes used to overhighlight in bright areas so this version don't have that problem
2. Increase in quality (less noise and iso )using hdr++ instead of hdrnet
Last edited:
Could you please edit that xml post and tell which xml is for which gcams. As you already told there is atleast one xml for gcam 8.1
Most of them are for lmc8.4 r15 excluding starkhdr++. I think the 9th one is April fool's joke that I fell for in telegram.(see size is also 1mb).
As said earlier I extracted these xmls from various sources. I keep it to merge all xml and improve.
I also recommend the xml with the name eiiiiioe because it is highly optimized for our devices performance cores. In short the processing is relatively faster.
Last edited:
I almost forgot this "alisa xml" requires this attached lib in lmc8.4 r15 otherwise will not produce best result. People say this produces the best natural details.(remove the .zip extension from the lib before putting)
Last edited:
ottili81
Senior Member
Did some great macros today with the antykat setting. Very pleased with that great work under heavy sunny conditions on that wall! Thx
Attachments
Hi guys
The XDA team decides to allow separated gcam threads .
Here's the separated AGC thread
The XDA team decides to allow separated gcam threads .
Here's the separated AGC thread
Honestly I don't think another thread is necessary. It would just make a Hassel to go back and fourth to two different threads for the same thing. After all it's a gcam.
Yes, I'm with you.
But I've asked about the first and second new thread of @Prashant Dukare and the XDA staff told me that this is the way.....
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
2
Pixel 8 Pro.
Testing this much hyped Sony DLSR again out of Telegram groups for AGC Mod. And i dunno whats so special.
I hate congratulating myself, but after a lot of back and forth, I just did it myself with a solid base more or less. I was tired of having to compromise between functions. Havent noticed anything i would have need to fix so far. So, never touch a running system.2I'm author of pretty popular universal config on other forum and want to share it here too.
My nickname there intro555 (links not allowed on XDA). Someone brought here old and modified version, here newest.
It took me half-year and 16 versions behind to fine-tune all 4 cameras. Especially neat macro.
Now I'm happy with result, like many users on that forum. So give a try, samples below post.
Compatible GCam: LMC 8.4 R17 or R18 (even R16).
Links above go to Celsoazevedo pages: pick up any APK package name. They differ to install multiply apps of same version.
> Download config (v.16)
Key points
- Realistic colors without pale overcontrast or overbrighting (like do stock and iPhones)
- Optimal noise cancellation: no unnecessary blurring, no noise
- Bright night mode and viewfinder
- Video stabilization in 1080p 60 FPS and 4K, even in macro
- Without rainbow dots in tree leaves, so called confetti
- 108 / 16MP upscale ready for main and selfie camera: use "RES" button
- For main and wide cameras never enable "HDR+ Enhanced" in quick menu or you got a lot of noise in low-light
- But for macro and selfie you should temporally enable "HDR+ Enhanced": this eliminates possible overlightning (GCam's thing)
- Never enable AWB or JAWB (buttons in viewfinder), keep "sun" button enabled
- Slow-motion video not work: can hang camera or capture sound of ultrasonic proximity sensor
- Face retouching hidden because it won't work in any GCam and config
Sometimes useful to lock focus for maximum magnification and don't rely on jumping auto.
LMC have manual focus slider, but for some reason there is long delay between pressing the shutter button and taking the picture, which is unacceptable.
Workaround: switch to "Night Mode". It sounds strange, but it's ok to use it even in bright day.
This is similar to "HDR Enhanced" and eliminating the need to temporarily change the HDR mode like described above.
Then in Quick menu by swiping down select "Focus > Near". I set correct values in config.
This will set the focus to maximum magnification. Now control it simply by moving your phone.
Exactly the same, but in the opposite direction if you select "Far". Useful for large objects.2
It's phone with micro lenses, here impossible to rid out of post-processing. Otherwise you get noisy, dull and low-hdr images.
What you call "gibberish", probably, just artifacts of noise cancellation - necessary evil. Binning imho totally not related. Yes, NC can be set lower which give fine "grain" details similar to processed RAW. But when light become insufficient - noise appears here and there. Especially in Night / Astro modes, of course. It's all basic inevitably thing.
I've seen such configs and they won't "pass" low-light tests (see below). So NC - compromise to use same config in any conditions without hassle of switching them. "Universal", as I said in original post.
For better understanding. First attached image showing with what GCam have to deal.
– First part - one true RAW frame from batch, got it via gcam.debug prop. "As is" image from sensor, that's how phone sees scene.
– Second - RAW mode, here less noise due stacking frames.
– Third - auto-processed regular JPEG.
As you see, in shadows or low-light physically not present much details, they "absorbed" by noise. And to keep image somewhat clean NC steps in introducing artifacts. Or in your opinion better to keep all that red dots?
Second image: comparison between low-NC config by user redtext and my.
His photos really have more details in good light, but not at evening / indoor.
Tell what better. Also I'd like to see sample without mentioned gibberish. And in low-light11 -
2820220901 Thread cleaned
In case of deleted files from users in my editable folder, test ended here.
I've followed the moderator suggestion about the sharing and the XDA rules, although I don't like to share with non XDA members.
This first post is now with a link to GDrive with shared xmls and libs
I've adjusted this folder that everyone can modify files inside.
Please don't delete files, otherwise the test with the editable shared folder ends.
Laptapper XDA gcam - Google Drive
drive.google.com
The both root documents are editable by everyone....27My final final KAIRU XML (?)
This might just be my very last XML if no problems are found. (For LMC R12 Fix)
Changelog:
Reduced the green tint on low-light (if it still persists then turn on AWB).
Sharper and reveals even more details.
Tuned the Wide camera and also fixed the distortion by changing the interface model, turns out it fixes the distortion only after capturing the image.
Added a subtle but very nice beauty mode "
". It is very nice especially on portrait shots / human shots because it hides a bit of the imperfections (but not too much like what a TikTok filter would). And has the same color profile as the Main lens. I also recommend this mode for a very good low-light or maybe even night pictures because it has very low noise
Please give it a try!2120220830 Moderator Information
20220901 Moderator Information
TL;DR: all sharing must be happening on XDA or use XDA as major platform
Wall of Text
Thanks for reading this wall of text. Hope you all have a good time developing!20Sharing my personal config, arrived at after months of testing and tweaking:
- For BSG {Mod edit: Telegram reference removed. Oswald Boelcke, Senior Moderator}, no library needed
- Tested on M2101K6G (sweet)
- Based on {Mod edit: Telegram reference removed. Oswald Boelcke, Senior Moderator} (heavily tweaked for reduced noise, more accurate colours, better dynamic range)
- All cameras configured (main, ultrawide, macro, front)
Includes stabilised 4k video recording for all cameras (though GCam stabilisation isn't as good as on stock MIUI app)- Photos are sharp and detailed, while still looking natural (no oversharpening halos etc)
- Colours are natural and accurate but more punchy than stock (especially in low light)
If you prefer instant photos you can turn off HDR+ Enhanced, but I recommend keeping it on as it gives you improved noise management in main cam, better preserved highlights in ultrawide, and more detail in macro/front at the cost of ~1 sec shutter time. Test for yourself if it's worth it.
ISSUES:
- No distortion correction in ultrawide
- In some cases Night Sight photos may be more noisy than optimal
- Viewfinder may get too dark to see well at night, you can turn on OpenGL preview to fix this
This is a work in progress, so let me know what you think!14hi guys
this is the SACHISK MIXED xml with main lens and front cam from KAIRU FINAL -0-.
in other words, all of Kairu's main lens natural and definition settings entered into Sachisk's XML. So we have the main camera from Kairu, and the rest (ultrawide lens and video recorder and other configs) from Sachisk. for LMC 8.4 x9s.
i could not change AWB settings, so the main camera has all the settings from Kairu without AWB. AWB settings from Sachisk.
from my last 3 2 and a half months, a LMC x9s is really quite stable, and an XML SACHISK MIXED presented the best compromise between functionality and good quality so far. I decided to mix the best of Kairu with the best of Sachisk according to my opinion.
New posts
-
-
TCL 2022 Google TVs (P635/P735/C635/C735/C835/C935)
- Latest: garethk1979