Then use stock or wait for update. You can also try AGC for Night Sight.Night shot is still almost twice worse compared to stock camera. Very blurry and no details.
"almost twice"
How did you measure it?
Last edited:
Then use stock or wait for update. You can also try AGC for Night Sight.Night shot is still almost twice worse compared to stock camera. Very blurry and no details.
It's for taking more saturated photos from main camera.
get crush when choose video 4kXml for LMC8.4 R14 and Xiaomi 11T Pro.
⚛️antykat_fast.v2_LMC_11TPro.xml
drive.google.com
Xml for fast taking photos. Very good results - sharp, detailed and clear photos.
Changes:
- Changes in sharpenning, more detailed photos
- Improved Night Sight photos
For photos in very low light I recomend to turn off HDRNet and set minimum 15 HDR frames. For Night Sight turn of HDRNet and set 27 HDR frames.
FOR USING WITH MY LIB (link below):
⚛️antykat_fast.v2_LMC.lib_11TPro.so
drive.google.com
The xml is useless without a lib.
How to use the xml and the lib:
1. Put the lib into folder:
Main storage/LMC8.4/libs
2. Put the xml into folder:
Main storage/LMC8.4
3. Double tap at the black area between shutter button and gallery to load the xml.
---------------
LMC8.4_R14 apk:
LMC8.4_Release_14.apk
drive.google.com
Let me guess... Are you using GSI rom?
CRDROID GSI ANDROID 13
That's why. On MIUI everything is OK. But there are some options in GSI rom that must be turned on. I have found this...
What is the difference between your XML Fast V2 and V18 ??Configs (xml + lib) for Xiaomi 11T Pro and LMC8.4 R14.
⚛️antykat_v18_LMC_11TPro.xml
drive.google.com
Changes:
- A lot of changes, mainly in sharpening.
- Improved all cameras.
About configs:
- Detailed, clear, natural looking photos from Main camera.
- Very nice soft selfies.
- Good photos from UW in good light conditions.
- Sharp and very detailed Macro photos.
- No oversharpening and distortions.
- Good for taking photos of human faces.
- Sat 1 and Sat 2 modes for more saturated photos from main camera.
- Live Photo works now. Hold shutter button to use it.
- Upscaling set to x2 for all cameras. Use "RES" button to get upscaled, higher resolution photos. Upscaling x2 means that you get 48MP photos from main camera. To change level of upscaling go to settings: Processing functions -> Upscale/Downscale.
NOTE:
Sometimes happens that LMC doesn't load settings from Libpatcher for Front camera and uses only settings from the lib. Photos are too sharp then. Switch to Front camera from other than Main camera to be sure that additional settings are used.
FOR USING WITH MY LIB (link below):
⚛️antykat_v18_LMC.lib_11TPro.so
drive.google.com
The xml is useless without a lib.
How to use the xml and the lib:
1. Put the lib into folder:
Main storage/LMC8.4/libs
2. Put the xml into folder:
Main storage/LMC8.4
3. Double tap at the black area between shutter button and gallery to load the xml.
--------------------
LMC8.4_R14 apk:
https://drive.google.com/file/d/1D7wGuY8x_i90LDkxFJuJEiHJU9C_svH5/view?usp=drivesdk
"Fast" is intentionally less modified, so processing takes less time. If you prefer quality over speed, choose v18. HDRNet (use it only in good light conditions) is faster then HDR+Enhanced and gives similar results. You can also use HDR+Enhanced and set number of HDR frames to "Auto". It will make taking photos faster too.What is the difference between your XML Fast V2 and V18 ??
If i choose HDRNet on V18 and Fast V2, what will be the difference?
This is the "photo capture" which is faster or only the post processing (circle on the photo)?"Fast" is intentionally less modified, so processing takes less time. If you prefer quality over speed, choose v18. HDRNet (use it only in good light conditions) is faster then HDR+Enhanced and gives similar results. You can also use HDR+Enhanced and set number of HDR frames to "Auto". It will make taking photos faster too.
For fast "photo capture" use HDRNet, HDR+ or HDR+Enhanced with low number of HDR frames. Post processing is longer in v18.This is the "photo capture" which is faster or only the post processing (circle on the photo)?
For a fast movment (a car or someone dancing), i should use the Fast V2 HDRNet or the V18 HDRNet?
Post processing time is not a problem for me, the more important is to shoot correctly a movment
Ok, I'll use the V18 with HDRNet (Daylight or fast movment) or HDR+ Enhanced (photos with no movment)For fast "photo capture" use HDRNet, HDR+ or HDR+Enhanced with low number of HDR frames. Post processing is longer in v18.
HDR frames are only for HDR+Enhanced. They don't affect HDRNet.Ok, I'll use the V18 with HDRNet (Daylight or fast movment) or HDR+ Enhanced (photos with no movment)
Do you think i can use HDRNet with Auto Frames? Does the Auto Frames can "recognize" a fast movment and using a low number of HDR Frames?
OkHDR frames are only for HDR+Enhanced. They don't affect HDRNet.
It work fine for taking photos in good light conditions. For low light photos it's better to set higher number of HDR frames manually.Ok
A last question : What do you think about the Auto mode for HDR Frame?
Thanks!⚛️antykat_v4.final_AGC(8.8).agc
drive.google.com
Created on Xiaomi 11T Pro and AGC8.8 V8. Should work on some other phones. Sometimes it requires some changes in settings. Lens info was deleted from the config, so lenses should be recognized properly on other devices.
Merge Method is set to 1 for all cameras (works with Snapdragon chipsets). Set Merge Method to 0 for all used profiles if you want to use the config with a MediaTek chipset: Icon in right upper corner -> choose a profile and use Quick Settings button -> Sabre / Spatial RGB -> Merge Method
Very detailed photos without over sharpness and distorsions.
5 saturation profiles for all cameras:
- Natural - close to real colours
- Sat 1 - Sat 3 - for more saturated photos
- B&W - black and white
Added libpatcher settings for additional 10 profiles for all cameras, so you can use your favorite LUTs with them, if you want.
AGC8.8 V8 apk:
How to use the config:
- Be sure you gave all required permissions to AGC
- Put the config into folder:
Download/AGC.8.8/configs
- Use "Load Configs" button from drop down menu and choose the config.
A lib is not required with this config
How to use LUTs (kind of filters) with AGC GCam:
1. Download LUTs from AGC ToolKit:
2. Put downloaded LUTs into folder:
/Download/AGC.8.8/luts
3. Icon in right upper corner -> choose a profile that you want to use with a LUT
4. Icon in right upper corner -> Quick Setting button -> Image Processing -> LUT file
You can also change the name of the profile there.
Creator: @antykat
I tested a lot of GCam ports and definitely the best till now in my opinion is MTSLCam_v4.1_MultiLibs. It gives amazing results, especially there are much more details comparing to other ports and MIUI camera app. Put configs file into folder created in internal storage and named ConfigsSettings8.3