how to enable the lenses..This works like a charm!
Is even possible activate the extra sensors in the "Advance" setting. We can use the deph sensor, macro, wide and (of course) main sensor
It's different package names, no major difference for our device.Into the downloads page i see different options: org.codeaurora.snapcam, com.android.mgc, com.google.android.GoogleCameraEng, etc...
Which version should we use on POCO X3 Pro and which are the differences?
Easiest way it to use an XML. One is developped on Telgram group if you want to join
Thanks, just installed it.Try this: https://drive.google.com/drive/folders/1CR4EuQOrtqvFrVe-TlN6Yo_0xDBrhUWH?usp=sharing
Here some sample pics i shot recently with this config, i'm bad photographer tho just point and shoot i dont change any settings https://postimg.cc/gallery/9wgqHnK
You're like a ray of sun in the middle of an awful road, thank you so much!
Try this, first load config then change save position https://drive.google.com/drive/folders/1V4wfKIanUC5usSUVu3uTgnW6-l6lJWNz?usp=sharingHey guys I tried MGC_8.1.101 and it works fine. But I found that there is no option to change the save position to the external sdcard. Is there any solution?
tried, but there is still no optionTry this, first load config then change save position https://drive.google.com/drive/folders/1V4wfKIanUC5usSUVu3uTgnW6-l6lJWNz?usp=sharing
I think thats just how it is, or at least I havent found out how to do it yet on any of them. So annoying
You can try looking around for some kind of script which will actively look for and transfer any files that get placed into the storage/emulated/0/DCIM/CameraHey guys I tried MGC_8.1.101 and it works fine. But I found that there is no option to change the save position to the external sdcard. Is there any solution?
As always, thanks for sharing.MGC 8.1.101 PV3 + MK7.1.5 config https://drive.google.com/drive/folders/16_Zm3N7MxzEF2jKGC3p7yfGRZekZ1RTF?usp=sharing
Open Gcam, pull down settings, tap cog to enter settings, tap Load config and select config.Thank you guys for your efforts,
But how may I load those xml / config files ?