Genisys theme for H818p V20c

H

haian36

Member
Sep 24, 2009
34
16
0
May 7, 2016 at 7:21 AM
Thank for @genisys
This theme mod for H818p V20c
Link (file img ) https://www.fshare.vn/file/84LBLRR9ODKF
link tool and GUIDE ( "huong dan flash img" in folder) : https://www.fshare.vn/file/84LBLRR9ODKF
Video: https://youtu.be/isBG3gzdcG8

Install the software LG UP, full driver as Uprom
The necessary files: rom.kdz (here is the v6.0).Copy file to phone memory system1.img (phone memory - the root not in any folder at all). Connect to a computer g4.n LGUP select upgrade (selected refurbish but also in case of withdrawal cable will not be reformatted g4 kip then have to start again). Wait for the machine reboot wait until the COM port appears on g4 (xx) - depending on plant- then immediately withdraw cable from the computer or g4. Off LGUP then plug the computer cable. CMD CMD enabled in folder attached below. Type the command as in the guide "Send_Command.exe \\. \ COMxx" (replaced by Section xx COM port number appears on g4). Appears the "#" type in the command "Print" (to appear 1 series statement form (0) (0) (0) ... (like that). Some computer users when typing win 7 "ip" will not appear at all when it shut down CMD, run it again and type the command would be. After the command "dd if=/data/media/0/system1.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0" wait until they appear flashing "#" followed LEAVE typing (without appliance ).
Remove the battery cable pulled reboot and achievements
BUG: select HOME in setting is forclose
...
 

Attachments

Last edited:
  • Like
Reactions: jskasia, rakshikashyap, MitoTakatori and 4 others
R

ralviariyan

Member
May 9, 2016
5
0
0
May 9, 2016 at 7:36 AM
Hello
I have to flash .img file with LGUP or something? because i cant flash it via LGUP (Zip or .img)
It would be great if you put some tutorial how to flash it :)

Thank you so much
 
QSR1

QSR1

Senior Member
Jun 4, 2014
147
9
0
May 10, 2016 at 1:37 PM
Good work

haian36 said:
Thank for @genisys
This theme mod for H818p V20c
Link (file img ) https://www.fshare.vn/file/84LBLRR9ODKF
link tool and GUIDE ( "huong dan flash img" in folder) : https://www.fshare.vn/file/84LBLRR9ODKF
Video: https://youtu.be/isBG3gzdcG8

Install the software LG UP, full driver as Uprom
The necessary files: rom.kdz (here is the v6.0).Copy file to phone memory system1.img (phone memory - the root not in any folder at all). Connect to a computer g4.n LGUP select upgrade (selected refurbish but also in case of withdrawal cable will not be reformatted g4 kip then have to start again). Wait for the machine reboot wait until the COM port appears on g4 (xx) - depending on plant- then immediately withdraw cable from the computer or g4. Off LGUP then plug the computer cable. CMD CMD enabled in folder attached below. Type the command as in the guide "Send_Command.exe \\. \ COMxx" (replaced by Section xx COM port number appears on g4). Appears the "#" type in the command "Print" (to appear 1 series statement form (0) (0) (0) ... (like that). Some computer users when typing win 7 "ip" will not appear at all when it shut down CMD, run it again and type the command would be. After the command "dd if=/data/media/0/system1.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0" wait until they appear flashing "#" followed LEAVE typing (without appliance ).
Remove the battery cable pulled reboot and achievements
BUG: select HOME in setting is forclose
...
Click to expand...
Looks really nice!:good:
As far as installation procedure is concerned, I have read it many times, but could not understand it exactly. If i have not miss understood, the procedure should be like that
Step 1. Upgrade/downgrade to MM v20C (if it is not already installed) through LGUP!
Step 2. inject the system image as we used to do for rooting LP!
Complete Guide+V20C+LGUP
Done
Thanks for hard work:good:
 
Last edited:
E

elrosid

Senior Member
Mar 25, 2016
218
43
0
Jakarta
May 10, 2016 at 3:25 PM
QSR1 said:
Looks really nice!:good:
As far as installation procedure is concerned, I have read it many times, but could not understand it exactly. If i have not miss understood, the procedure should be like that
Step 1. Upgrade/downgrade to MM v20C (if it is not already installed) through LGUP!
Step 2. inject the system image as we used to do for rooting LP!
Complete Guide+V20C+LGUP
Done
Thanks for hard work:good:
Click to expand...
have you tried the mod? i want to but still confused about the steps :rolleyes:
 
R

ralviariyan

Member
May 9, 2016
5
0
0
May 10, 2016 at 4:23 PM
QSR1 said:
Looks really nice!:good:
As far as installation procedure is concerned, I have read it many times, but could not understand it exactly. If i have not miss understood, the procedure should be like that
Step 1. Upgrade/downgrade to MM v20C (if it is not already installed) through LGUP!
Step 2. inject the system image as we used to do for rooting LP!
Complete Guide+V20C+LGUP
Done
Thanks for hard work:good:
Click to expand...
elrosid said:
have you tried the mod? i want to but still confused about the steps :rolleyes:
Click to expand...
I triend injecting it like root procedure for LP. I have no luck, getting error when i send the "Print" and "dd if=/data/media/0/system1.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0" command
 
You must log in or register to reply here.

New posts

Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone