[GNEX TOOLKIT V11.1.0] Drivers, Backup, Unlock, Root, Recovery, Flash + MORE [GSM]

Search This thread
By:
Advanced…
K

krneki10

Senior Member
Oct 6, 2011
425
31
NCguy said:
unlocking will blow away your data. You had to unlock it to load that custom rom and recovery. Did you re-lock it again?
Click to expand...
Click to collapse
By unlocking I meant unlocking home screen (it didn't wake up). Sorry I know I wrote it weird.

Anyway, here's update:
I can't get into recovery with volume down + power up button, but I can access TWRP recovery via fastboot.

I have Cataclysm ROM 4.3 with TWRP. I've tried to reflash it, but it's still the same, it will stay at X animation.

Thanks
 
N

NCguy

Senior Member
Jul 4, 2010
1,658
227
NC
krneki10 said:
By unlocking I meant unlocking home screen (it didn't wake up). Sorry I know I wrote it weird.

Anyway, here's update:
I can't get into recovery with volume down + power up button, but I can access TWRP recovery via fastboot.

I have Cataclysm ROM 4.3 with TWRP. I've tried to reflash it, but it's still the same, it will stay at X animation.

Thanks
Click to expand...
Click to collapse

how about "booting" into recovery instead of the recovery on your device and then flashing? Maybe a stock rom if necessary.
 
N

NCguy

Senior Member
Jul 4, 2010
1,658
227
NC
m.is.for.michael said:
Have you installed a Kit Kat ROM? If so, you'll need to download new adb and fastboot executables from the web and replace the adb-toolkit and fastboot-toolkit files

sent from my brain using telepathy
Click to expand...
Click to collapse

I'm a bit confused. This is now a unified kit and supports devices like the Nexus 5 which have been KitKat from the start. Why would the adb and fastboot in the kit not support KitKat unless you had an old, non-updating version of the kit?
 
M

m.is.for.michael

Senior Member
Apr 15, 2012
851
280
Melbourne
Google Pixel 6 Pro
NCguy said:
I'm a bit confused. This is now a unified kit and supports devices like the Nexus 5 which have been KitKat from the start. Why would the adb and fastboot in the kit not support KitKat unless you had an old, non-updating version of the kit?
Click to expand...
Click to collapse

OK ignore me. I thought this was the gnex thread. I had no idea about any unified toolkit.
In the past, keeping your pc communicating with your phone after updating to a new android release has required new adb and fastboot binaries.

sent from my brain using telepathy
 
N

NCguy

Senior Member
Jul 4, 2010
1,658
227
NC
m.is.for.michael said:
OK ignore me. I thought this was the gnex thread. I had no idea about any unified toolkit.
In the past, keeping your pc communicating with your phone after updating to a new android release has required new adb and fastboot binaries.

sent from my brain using telepathy
Click to expand...
Click to collapse

still is the Galaxy Nexus thread but apparently all the the devices have merged into a "unified" kit. Due to the common code it must be much easier for skip to maintain a single kit. Skip still seems to be running individual forum threads even though it's now a common kit.
 
ricarpe

ricarpe

Member
Dec 9, 2011
43
10
VA
I was able to get it running on my laptop. I uninstalled and re-installed the toolkit. I was then able to get the Unified Toolkit update and re-enter my "Donator's Code" for the Pro version.
 
mskip

mskip

Retired Senior Moderator
Mar 20, 2008
12,328
16,068
Norfolk
This is probably the biggest update I have ever done as I had to update every supported device (19 and counting now) for the new Toolkit base.

Nexus 6 and Nexus 9 devices have been added to the UAT family and ALL devices have been updated to support the latest available builds and there is a new option for Pro users to root ANY build.

Loads of things have been tweaked, fine tuned or re-written to make them work better, I couldn’t possibly list everything that has been done on this version but I have been working til about 4am every night for the last week to get it finished as soon as possible.

A large amount of the procedures rely on TWRP openrecoveryscript to automatically flash zip files and I have decided (for now) to stick with TWRP 2.7 as there seem to be problems with adb on 2.8. When I know this is fully fixed I will start updating all devices to the latest TWRP versions.

As usual EVERYTHING has detailed instructions included so if you aren’t sure what an option does then just select it and read. New options in the Backups section and Rooting section, and more options added to the rooting procedure including using SuperSU Beta if desired.

It would take me 2 months to check absolutely everything (build options, model file downloads, recovery download) so if anyone spots ANYTHING please let me know as soon as possible so it can be fixed.

I would advise Pro users to download the full version from the link below as it will take me a few days to create the AutoUpdate files for every device. Existing codes will of course still work and if you install to the same folder as it was in before then pro features should automatically be activated at startup.

Now this is out I will start working on adding the Galaxy Note4, Galaxy Tab S (both sizes) and Galaxy Note 10.1 2014 edition. These should be done and added within a week hopefully as im busy with family commitments over christmas so will only be able to work nights for a few weeks.

Download page: http://www.skipsoft.net/?wpdmpro=unified-android-toolkit-v1-3-3

Enjoy.

Mark.
 
  • Like
Reactions: skyleth, mizifih, CrotaNexus and 3 others
C

[email protected]

Senior Member
Jul 15, 2011
60
15
mskip said:
The Unified Android Toolkit brings together all the Nexus and Samsung Toolkits and supports Galaxy Nexus
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
Click to expand...
Click to collapse

There seems to be an issue with the Module for the GNEX

Multiple Choices
The document name you requested (/download/toolkit/unifiedandroidtoolkit/devicefiles/devicefiles_GalaxyNexus_b14.zip) could not be found on this server. However, we found documents with names similar to the one you requested.

Available documents:

/download/toolkit/unifiedandroidtoolkit/devicefiles/devicefiles_GalaxyNexus_b12.zip (mistyped character)
/download/toolkit/unifiedandroidtoolkit/devicefiles/devicefiles_GalaxyNexus_b13.zip (mistyped character)
 
mskip

mskip

Retired Senior Moderator
Mar 20, 2008
12,328
16,068
Norfolk
[email protected] said:
There seems to be an issue with the Module for the GNEX

Multiple Choices
The document name you requested (/download/toolkit/unifiedandroidtoolkit/devicefiles/devicefiles_GalaxyNexus_b14.zip) could not be found on this server. However, we found documents with names similar to the one you requested.

Available documents:

/download/toolkit/unifiedandroidtoolkit/devicefiles/devicefiles_GalaxyNexus_b12.zip (mistyped character)
/download/toolkit/unifiedandroidtoolkit/devicefiles/devicefiles_GalaxyNexus_b13.zip (mistyped character)
Click to expand...
Click to collapse
Yes sorry I only just noticed this. Should work fine now as I uploaded the missing file.

Mark.
 
mskip

mskip

Retired Senior Moderator
Mar 20, 2008
12,328
16,068
Norfolk
TOOLKIT UPDATE
New functions added to the root section [new rooting options for root and unroot],
More text added to various sections,
Text added to the Factory Image Download/Flash section to help recovery from a bootloop/device not booting properly,
Fixed apps backup routine not starting when selected,
Fixed the unroot zip file and added stock recovery to the routine to make the device fully compatible with OTA updates,
OTA Updates can be sideloaded via stock recovery using the Toolkit (unroot first though),
Toolkit always updates to latest SuperSU version from Chainfire.

I will push AutoUpdates for all Nexus devices within the next few days to make it easier to update but for users without the Pro Version (I urge you to donate if you use it/like my work as I won't be able to keep it going much longer without your support) you can do the following:
In the Tools folder delete the tkmainGalaxyNexus.exe file (this will trigger new device files to be downloaded at startup)
Download the updated unroot zip file from http://skipsoft.net/download/fileupdates/Unroot-UninstallBusybox-CwmManager.zip and move it to the root folder (overwriting the original)
Start the Toolkit, select your device and enjoy.

I am currently working on adding a OnePlus One Toolkit device module. Once that is finished I will build a new Toolkit and you will be notified on startup that a new version is ready to download directly via the Toolkit (if using UAT base 1.3.3 or later).

If anything doesn't work properly please let me know in the thread or at [email protected] so it can be fixed. I do test as much as I can on most devices but i'm not perfect

Mark.
 
  • Like
Reactions: eKeith
G

[email protected]

Member
Sep 3, 2009
26
0
Chignolo d'Isola
mskip said:
TOOLKIT UPDATE
If anything doesn't work properly please let me know in the thread or at [email protected] so it can be fixed. I do test as much as I can on most devices but i'm not perfect

Mark.
Click to expand...
Click to collapse
Hi Mark I've got one problem with your beautiful software on my Windows 7 Pro 64bit machine. When the tool arrives in the Flashing System Image it stucks and the procedure doesn't come to an end... I'm not able to flash any rom.

Code: 
Flashing System Image..

erasing 'system'...
OKAY [ 0.007s]
sending 'system' (474180 KB)...
OKAY [ 47.158s]
writing 'system'...

Where's the problem?
 
mskip

mskip

Retired Senior Moderator
Mar 20, 2008
12,328
16,068
Norfolk
[email protected] said:
Hi Mark I've got one problem with your beautiful software on my Windows 7 Pro 64bit machine. When the tool arrives in the Flashing System Image it stucks and the procedure doesn't come to an end... I'm not able to flash any rom.

Code: 
Flashing System Image..

erasing 'system'...
OKAY [ 0.007s]
sending 'system' (474180 KB)...
OKAY [ 47.158s]
writing 'system'...

Where's the problem?
Click to expand...
Click to collapse
Do the other images flash before it gets to the system image?

What is your devices model number and which rom are you trying to flash?

Mark.
 
G

[email protected]

Member
Sep 3, 2009
26
0
Chignolo d'Isola
mskip said:
Do the other images flash before it gets to the system image?
What is your devices model number and which rom are you trying to flash?

Mark.
Click to expand...
Click to collapse

Few days ago my Galaxy Nexus (Maguro GT-I9250) started to do bootloop. My current, not working ROM, is the CyanogenMod 10.2. I'll try with your tool to restore my maguro to stock with several roms, and all roms have the same problem. The last rom I tried was the 4.1.2 (JZO54K) yaiku version. Other information on my device:
  • bootloader version: PRIMELC03
  • baseband version: I9250XXLF1
  • lock state: UNLOCKED

I'll try also with Odin but it stuck in the same point, it seems that i'm not able to write anything.
 
mskip

mskip

Retired Senior Moderator
Mar 20, 2008
12,328
16,068
Norfolk
UAT 1.4.1 RELEASED AND AUTOUPDATE and PUBLIC VERSIONS UPDATED

Changelog for device module:
+Added more stability to certain routines [root, flashing]
+Added file checker after device selection to check needed files are up to date
+Updated UniversalAdbInstaller for Windows 10 compatability
+Added new upcoming devices to device selection screen
+Added driver installation option at startup for new installs

Changelog for UAT 1.4.1:
+Added new upcoming devices to device selection screen
+Main files now signed with Digital Certificate to ensure files are original and safe
+Added file checker after device selection to check needed files are up to date
+Updated UniversalAdbInstaller for Windows 10 compatability
+Added driver installation option at startup for new installs
+Updated ToolKitClean.exe to allow users to update the main ToolKit.exe file to latest available version without having to download/install the whole ToolKit again (like when a new device is added or files/drivers updated)
+Improvements and minor bug fixes
+Installer now give option for Fresh Install (removes any existing device files) or Upgrade (to just update base files)

The AutoUpdate for pro users has all the above included (update via the toolkit).
You can also download the Unified Android Toolkit 1.4.1 from http://www.skipsoft.net/?p=1660. You can select Fresh Install to delete all device modules and related files (recovery, root) so when you select your device at startup it will download the latest module with all the above included. If you have several device modules downloaded (e.g. for samsung and nexus) then you can select 'upgrade' when installing the toolkit, then run ToolKitClean.exe to delete just the modules you want to update.

Enjoy, Mark.
 
  • Like
Reactions: Exnor and mdki1996
You must log in or register to reply here.

Similar threads

franciscofranco
[KERNEL] [GPL] [GN] franco.Kernel r398
Replies
45K
Views
8M
C
Ctzokas
mskip
[GNEX TOOLKIT V11.1] Drivers, Backup, Unlock, Root, Recovery, Flash + MORE [VERIZON]
Replies
1K
Views
606K
ا
ابو اواب
kaluoshi
  • Locked
[ROM] [4.4.4] [OFFICIAL] ParanoidAndroid 4.6
Replies
41K
Views
8M
M
malybru
bigxie
[ROM] [OTA] [GSM] Android 4.2.2 JDQ39: Rooted Busybox Deodexed/Odexed (2/12/13)
Replies
6K
Views
2M
R
rob_yx
mskip
[TOOLKIT] SKIPSOFT ANDROID TOOLKIT -GNEX SPR- Drivers, Root, Recovery + MORE
Replies
729
Views
616K
lambdaman
lambdaman

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 867
    mskip
    mskip
    Frequently Asked Questions:

    Q. What is ADB Shell?

    Adb shell is a linux command line tool (because android is based on linux) used to send commands to your android device. For S-ON devices, this is crucial for modifying files in the /system partition (where the rom sits) as you cannot modify anything in /system when the rom is running without S-OFF (e.g removing system apps).

    From Google:

    Android Debug Bridge (adb) is a versatile tool lets you manage the state of an emulator instance or Android-powered device. It is a client-server program that includes three components:
    A client, which runs on your development machine. You can invoke a client from a shell by issuing an adb command. Other Android tools such as the ADT plugin and DDMS also create adb clients.
    A server, which runs as a background process on your development machine. The server manages communication between the client and the adb daemon running on an emulator or device.
    A daemon, which runs as a background process on each emulator or device instance.

    ----------------------------------------------------------------------------

    Q. What is FASTBOOT?

    Fastboot is 2 things. It is a mode on the phone, which looks a little like Bootloader. You can access it by holding 'Volume Up' and 'Volume Down' whilst turning on the phone.

    It is also a way of flashing radios, recovery, boot images and system images in a command line method from a PC much like adb.

    ----------------------------------------------------------------------------

    Q. I flashed CWM but each time I reboot the Stock Recovery is back

    There is an auto recovery restore system on certain Stock Android Builds that will reflash the Stock Recovery if you flash CWM on a Stock Rom.

    Use Root Explorer to Mount the system folder as R/W (or use a free app from Google Play such as ES File Explorer). Rename the files /system/recovery-from-boot.p and /system/etc/install-recovery.sh. Now when you flash CWM Recovery it will NOT be overwritten after a reboot.

    OR you can use the ToolKit to rename the files (root access needed).

    ----------------------------------------------------------------------------

    Q. I want to send my phone back so I need to flash a stock rom and relock the bootloader

    1. Download, install and run the Unified Android Toolkit.
    2. Install adb/fastboot drivers (if you havent already done so)
    3. Option 9 to download a Google Factory Image.
    4. After it finishes downloading you will be given the option to flash the image to your device. Do this.
    4. Let the device reboot, then shut it down and re-enter fastboot mode (or boot to fastboot mode via the Reboot Screen in the ToolKit).
    5. Option3, 2 to relock the bootloader.

    Your internal storage will be formatted and data and cache wiped. Your device will now be back to an out-of-the-box FULLY STOCK state and ready to send back.

    ----------------------------------------------------------------------------

    Q. What is the difference between Nandroid and Titanium backup?

    A NANDROID will backup the whole system including boot, system, data and recovery partitions so you can restore a complete rom and all data and settings.

    Essentially Titanium Backup is used to backup apps and associated user data. These could be restored AFTER a full wipe and a new Rom had been flashed on your phone.

    The other option now which google added into the new adb command list is the adb backup which is in the ToolKit and can do the same job as Titanium Backup but will store the data on your PC rather than on the phone (where it takes up space and could be deleted).

    ----------------------------------------------------------------------------

    Q. When I try to open the ToolKit I get a box pop up for a split second and then it goes away. My AntiVirus program says the file may be harmful.

    The exe files I compiled are not digitally signed with a Microsoft certificate (as they cost money) so certain AntiVirus programs (mainly Norton) will pick it up as potentially harmful when it is not. They will pick up ANY file that doesnt contain a purchased Microsoft certificate in the same way. Restore the deleted file and exclude it from further scans and it will be fine.

    ----------------------------------------------------------------------------

    Q. The ToolKit recognises my device in adb mode but not in fastboot mode (or other way round).

    Open the Device Manager on your pc and then boot your tablet into fastboot mode or adb mode (dont plug the usb cable in yet). Make sure USB debugging is enabled on your tablet in settings, developer options. Plug the cable in while watching the Device Manager and determine which item is added to the list with the device plugged in. Once you have found it right click on the item and select update driver. Select 'browse my computer' from the list and then browse to the 'drivers' folder in the ToolKit folder (wherever you installed the ToolKit to). Make sure sub folders is ticked and click next. Hopefully the driver will be picked up and installed.

    You can check if a driver has been installed by looking at the top of the Main Menu in the ToolKit while in fastboot mode and adb modes. If a serial number is displayed in each mode then it will work fine.

    ----------------------------------------------------------------------------

    Q. Can I back up my apps before unlocking the Bootloader so I don't lose everything?

    Performing an APPS BACKUP (option2, 1) will backup all apps that were installed after you first used your device. This will include any associated user data (such as settings or high scores for games) and apps you installed from Google Play Store. Just follow the recommended options and remember to turn your phones screen on before starting it as you need to confirm on your screen.

    This option will NOT require your bootloader to be unlocked first.

    You can also backup your Internal Storage without unlocking using option 2, 3 from the main menu. This will backup anything you store on your Internal Storage such as game data, music, videos. This is just pulled from your /data/media folder so you can view or edit the files on your pc after they have been pulled.

    You can then unlock the bootloader (wiping your device) and retore the apps (option 2, 10) and Internal Storage data (option 2, 11) after doing whatever you want to with your device.

    The only thing you cannot do with the ToolKit is to save the system settings but some of those are backed up by google if you chose that option when turning your device on the first time.

    ----------------------------------------------------------------------------

    Q. I have Windows 8 and cannot install the drivers

    How to Disable Driver Signature Enforcement in Windows 8:

    From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the pop-out bar to appear, then click the Gear icon).
    Click ‘More PC Settings’.
    Click ‘General’.
    Scroll down, and click ‘Restart now’ under ‘Advanced startup’.
    Wait a bit.
    Click ‘Troubleshoot’.
    Click ‘Advanced Options’
    Click ‘Windows Startup Settings’
    Click Restart.

    When your computer restarts, select ‘Disable driver signature enforcement‘ from the list. You can now load your modified driver. Reboot again once the driver is installed and all will be well.

    ----------------------------------------------------------------------------

    Q. I cannot find Developer options to Enable USB Debugging

    With Android 4.2 google have thought it would be funny to hide the Developer options screen in the Settings. This means you cannot enable usb debugging to communicate with your device. To show the Developers options screen do the following:

    Goto Settings, About tablet and tap your finger on the the 'Build number' text at the bottom 7 times (not too fast).
    When you have tapped 3 times you will be given a countdown of taps until you become a 'developer'.
    Once you are told you are now a developer you can go back to the Settings screen and can see Developer options.
    You can now go into Developer options and enable usb debugging.

    ----------------------------------------------------------------------------

    Q. How do I Update to the latest Google Stock Rom (manually)?

    THE FOLLOWING PROCESS WILL ERASE YOUR INTERNAL STORAGE BACKUP ANYTHING YOU NEED.

    You can use the Android ToolKit which will do everything automatically.

    Or you can follow the instructions and do it manually:

    These steps assume that you have set up your adb/fastboot drivers correctly.

    1. Download it from https://developers.google.com/android/nexus/images
    2. Unzip the .tar file to a folder on your pc
    3. Unzip the needed files from the .tar file to the same folder on your pc
    4. Copy the file fastboot-windows.exe to this folder (you can find the fastboot file in many places including my ToolKit download on post#1) and rename the file to fastboot.exe
    5. Boot the phone into Fastboot Mode (KEEP holding the 'Volume up' and 'Volume down' buttons while pressing the 'Power' button)
    6. Connect your device via the usb cable
    7. Browse to this folder on your pc and run the flash-all.bat file to flash the stock images

    ----------------------------------------------------------------------------

    Q. I tried to enter the code for the professional version but the Toolkit says the code is incorrect

    Make sure the code entered is for the correct device being used in the Unified Android Toolkit.

    You need to make sure you start the Toolkit with the toolkit.exe file when activating so the settings can be initialised or the code will not be accepted.

    Also make sure you enter the code correctly as the characters are case sensitive.
    View
    253
    mskip
    mskip
    [TOOLKIT] SKIPSOFT ANDROID TOOLKIT -GNEX - GSM- Drivers, Root, Recovery + MORE

    SPRINT MODEL SUPPORTED *HERE*
    VERIZON MODEL SUPPORTED *HERE*

    GALAXY NEXUS - SUPPORTS ALL AVAILABLE VERSIONS
    SEE SUPPORT LIST FOR PUBLIC/PRO VERSIONS *HERE*

    The Unified Android Toolkit brings together all the Nexus and Samsung Toolkits and supports many Nexus and Samsung devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.

    FUNCTIONS OF UNIFIED ANDROID TOOLKIT
    * Install correct adb/fastboot drivers automatically on Windows xp/vista/7/8 32bit+64bit/Windows 10
    * Backup/Restore a single package or all apps, user data and Internal Storage
    * Backup your data from selectable folders [internal or external storage] to your PC for a Full Safe backup of data
    * Unlock/Re-Lock your Bootloader [Nexus]
    * Root Stock builds
    * Various Root options using insecure boot image or custom recovery
    * ALLINONE to Unlock, Root, Rename the Restore Files and install busybox [Nexus]
    * ALLINONE to flash custom Recovery Root, Rename the Restore Files and install busybox [Samsung]
    * [NEW] use SkipRoot boot image to Auto Root device, install Busybox Binaries and rename Recovery Restore files [selected devices]
    * Install BusyBox on your device
    * Perform a FULL NANDROID Backup of your system (Boot, Cache, Data, Recovery and System) via adb and save in Custom Recovery format on your PC which can be Restored via CWM Recovery [if insecure boot image available]
    * Fix extSdCard write permissions from installed apps in Android 4.4+ [Samsung]
    * Pull /data and /system folders, compress to a .tar file and save to your PC [if insecure boot image available]
    * Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC [if insecure boot image available]
    * Extras, Tips and Tricks section
    * Auto Update ToolKit to latest available version at startup (professional only feature)
    * Program up to 10 Quickpick slots and run them very quickly (professional only feature)
    * Mods section to automatically perform certain tasks on your device
    * Download Google Stock Image directly to correct ToolKit folder for extracting and flashing [Nexus]
    * Check md5 of stock image to make sure downloaded file isn’t corrupted before flashing [Nexus]
    * Download Samsung Stock Firmware to PC for extracting and flashing via Odin [Samsung]
    * Flash Custom Recovery or Google Stock Image to Device
    * Flash any part of a stock Nexus image to device [boot, system, recovery] – Great for fixing broken parts of firmware
    * Rename the Recovery Restore File present on some Stock Roms
    * Boot into CWM Touch, TWRP, Philz Touch Recovery or Stock Recovery without Flashing it [Nexus]
    * Flash Custom Recovery to Device
    * Boot [Nexus] or Flash .img Files directly from your PC
    * Install a single apk or multiple apk’s to your device
    * Push Files from your PC to your device
    * Pull Files from your device to your PC
    * Disable forced encryption on Nexus6 and Nexus9 devices
    * Install Root Checker app by Burrows Apps
    * Install Backup/Restore app by MDroid Apps [calls log, sms, contacts]
    * Install EFS/Partition Backup/Restore app by Wanam
    * Dump selected LogCat buffers to your PC
    * Dump BugReport to your PC
    * Set Files Permissions on your device
    * Open new Command Prompt for manual input
    * Reboot device to Fastboot Mode or Android from fastboot mode [Nexus]
    * Reboot device to Fastboot Mode [Nexus], Recovery, Android or Download Mode [Samsung] from adb mode
    * Display Important Information about your device

    --------------------------------------------------------------
    Toolkit_main_menu.png

    --------------------------------------------------------------

    SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*

    DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)

    NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.

    Credits: ChainsDD for Superuser, Chainfire for SuperSU, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.

    --------------------------------------------------------------

    WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
    THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.

    ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
    THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
    THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
    PRO USERS CAN ALSO SELECT THE “ANY BUILD” OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).

    MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW.

    AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv

    --------------------------------------------------------------

    PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.

    --------------------------------------------------------------

    1. INSTALLING ADB/FASTBOOT DRIVERS

    The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.

    THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.

    If drivers are not installed or there is an exclamation mark next to the device:
    Plug the device in to a usb cable directly connected to your motherboard.
    In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
    Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
    If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
    If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
    Click OK and select Google ADB Interface.

    Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.

    On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.

    --------------------------------------------------------------

    2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT

    When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.

    Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).

    --------------------------------------------------------------

    USEFUL INFORMATION

    How to get into your FastBoot Mode
    1. Turn your phone off
    2. Unplug your usb cable if you have one plugged in
    3. Keep holding the 'Volume Down' and 'Power' buttons to boot the phone into FastBoot Mode

    How to get into Recovery
    1. First boot into FastBoot Mode as described above
    2. Scroll down with the 'Volume Down' button until it says 'Recovery mode' at the top and press the 'Power' button to enter Recovery

    Show the Menu in the Stock Recovery Screen
    1. Hold the Power button and keep holding as you press the Volume Up button quickly. The blue recovery menu screen should pop up.

    --------------------------------------------------------------
    *DISCLAIMER*
    I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
    View
    193
    mskip
    mskip
    UPDATES:
    View
    74
    mskip
    mskip
    Manual Rooting Instructions for Galaxy Nexus

    VIDEOS:
    View
    29
    mskip
    mskip
    mohitrocks said:
    Amazing thread! This thread would probably be really helpful for newbies :)
    Just a few suggestions:
    1.)You might want to include how to flash custom kernels
    and also that you can
    2.)Clockwork Recovery can be instealled through Rom Manager

    Nonetheless, great thread :)
    Click to expand...
    Click to collapse
    Thanks :)

    1. Added Step 7, how to flash kernels and Radios via CWM.

    2. Added a Note at the end of the CWM flashing step for the Rom Manager method.

    Mark.
    View

New posts