For me the same, I have shell access but always still need the cable to enable the green menu and also VIM. How to do this via shell, would be awesome.
Golf MK7 Discover Pro Hack possible?
- Thread starter lionheartk
- Start date
For me the same, I have shell access but always still need the cable to enable the green menu and also VIM. How to do this via shell, would be awesome.
mib2 wlan activation
Good morning from a windy UK
Could you help me please to activate Wlan on mib2 std with the OBD-Eleven dongle and app.
Ian
Good morning from a windy UK
Could you help me please to activate Wlan on mib2 std with the OBD-Eleven dongle and app.
Ian
I've done much the same - replaced my MIB1 to a MIB2 head unit and can see from the setup menu (hold setup down for 5 seconds or so and you can access the FeC codes installed etc.) that some codes remain from the other car - the VIN number needs to be changed.
I was chatting to my VW guy about the possibility of ODIS bringing the FeC codes across to my VIN when connected - he wasn't sure but will look into it - I'll allow him to use my car as a guinea pig.
I have ordered an ODIS lead and software for myself to play around with and will see what I can do with that too.
Finally, what's up with the login on here? I've been a member for years but the login page loses the input fields...
Hey guys,
I need your help.
I've tried to connect with my MIB2HIGH and had no success.
I tried it with the terminal programm "putty" and an ethernet USB adapter. Sadly no success.
I also have read, to try to connect with tha wifi client mode, but also, you guess, with no success.
Can someone here tell me, how i can access my unit?
Or just name me pages where i can read in this whole stuff to understand, where i have taken the mistake.
I just want to install/replace one file to use the mqb toolbox on my unit not more.
No hacking or something else. (Maybe Google earth would be nice on my unit, but i think that is already blocked during VW since the middle of 2017.
Hope someone here can push me in the right direction.
Many thanks for the help in my case.
As always with best regards from Austria.
I need your help.
I've tried to connect with my MIB2HIGH and had no success.
I tried it with the terminal programm "putty" and an ethernet USB adapter. Sadly no success.
I also have read, to try to connect with tha wifi client mode, but also, you guess, with no success.
Can someone here tell me, how i can access my unit?
Or just name me pages where i can read in this whole stuff to understand, where i have taken the mistake.
I just want to install/replace one file to use the mqb toolbox on my unit not more.
No hacking or something else. (Maybe Google earth would be nice on my unit, but i think that is already blocked during VW since the middle of 2017.
Hope someone here can push me in the right direction.
Many thanks for the help in my case.
As always with best regards from Austria.
So guys i got a step forward.
Now i get the terminal screen with login and password line.
Did you know a solution to grap the hash word from the passwort out of the storage of the unit?
So I can convert this to clear text.
Now i get the terminal screen with login and password line.
Did you know a solution to grap the hash word from the passwort out of the storage of the unit?
So I can convert this to clear text.
MIB1 MIB2 STD PQ ZR unlock activation login passwords
I can help with most Harman (MIB2 High) passwords.
I can unlock CarPlay Android Auto mirror link or MapCare.
Have solutions for Harman, Technisat and Delphi.
For more info send PM or ask here with all details (unit type, current firmware etc.)
I can help with most Harman (MIB2 High) passwords.
I can unlock CarPlay Android Auto mirror link or MapCare.
Have solutions for Harman, Technisat and Delphi.
For more info send PM or ask here with all details (unit type, current firmware etc.)
I have a Harman MIB2 High MU1339, recently updated by me with this update: TT_MHI2_ER_AU43x_P5098
The Car is an Audi TT MJ2015. Everything is working but i can't get Telnet access. The car has recently been at service and they mentioned some ominous software update to the MMI. I tried all the usual Dlink DUB e100 Tricks but can't connect although i see the DLink blinking. No Ping reply on 172.16.250.248 either. Tried with Wifi client mode as well - no access.
Do i need to downgrade first or do i really have to use a serial connection though the Quadlock connector?
Edit: green and red Menu are available, developer mode is enabled. MQB-Toolbox won't installfrom SD card...
Last edited:
nevermind, i got it. Dumb typo on the computer network config. I should not have done this at 3 in the morning
ok, now i have the ifs root and fec container. Is it possible to patch out the Fec checks on this firmware version so i can get Mapcare and all the other goodies going? Would you be willing to take a look?
nevermind, i got it. Dumb typo on the computer network config. I should not have done this at 3 in the morning
ok, now i have the ifs root and fec container. Is it possible to patch out the Fec checks on this firmware version so i can get Mapcare and all the other goodies going? Would you be willing to take a look?
Yes it's possible. I have aleready patched ifs-root for that FW
I am retrofitting a MIB STD2 PQ +/NAV into a VW Caddy Panel van. Is this possible via FW through SD?
How did you get access to root? I have dlink usb adapter but struggling to connect? Can anyone detail the steps to connect including ip addresses that should be used?
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
2Hello everyone, hope I'm posting in the right place!
I own a VW Golf MK7 with the Discover Pro media system.
Recently I found a copy of the update package for it, and dabbling inside I found out a ton of cool info.
It's based ona Tegra 2 platform, and runs QNX 1.2b. There seems to be a way to telnet to the system somehow. Inside the files I found a ton of stuff, like what seems to be the user and root passwords?
Code:root:x:0:0::/root/:/bin/sh user:x:100:100::/eso:/bin/sh nopasswd root::0:0::/root/:/bin/sh user::100:100:FTP User:/eso:/bin/sh group root:x:0: user:x:100:user root:f7otIPwQDbHLw:1320853303:0:0 user:6TfLBY3WGivFU:1324310912:0:0 ffs3.1ver #DATUM 2037
I don't know much about QNX, maybe someone can help and something can be done? Unlocking Mirrorlink? Unlocking other features? Installing apps? Installing android on it since it's Tegra 2 Based?
Thanks for the time and help!22Sorry for the late reply... but you inspired me some time ago to start digging into this.
I've built a serial cable to connect into the back of the Discover Pro MIB1 unit, and now I've got root access to the unit. So far I haven't been able to enable SWAP features, but I did make some changes to the Green Engineering Menu, that allow me to set stuff and run scripts from SD again.
I also enabled WLAN hotspot on the Non-telephone-capable unit, but I haven't been able to put it into WLAN Client mode yet... that's another hurdle for an other time, I guess. Enabling wlan unhides the Google Earth and online services checkboxes in the navigation, but since it doesn't have any connection yet... it doesn't do much.
I would love to exchange thoughts and experiences about this device!!2
1: should be possible, just use one of the network adapters I mentioned
2: as far as I can tell, this is always on. But it doesn't hurt to enable developer mode
3: all the time.