It would help if read previous post. You can install with bender007 proxy from page 1. Also worth reading everything on Page 1 and make notes.
Googlefier - Install GMS on Huawei/Honor
- Thread starter bender_007
- Start date
It would help if read previous post. You can install with bender007 proxy from page 1. Also worth reading everything on Page 1 and make notes.
Hello, just got my brand new p40 pro. Downgraded to 10.1.0.148 as I'v read from another thread with the same phone but I am stuck at opening the "G" app ... whatever I do. I assume I need to go to .131 but I am afraid I will brick my phone installing the wrong version.
My phone is ELS-NX9 C432E8R6P1 but in the list kindly provided by Bender_007 can't find my phone: (C432E8R5P2) or (C432E7R4P1) - both NX9. In the FirmwareFinder can't find the bloody 131.
Edit: I'm from EU/Romania.
My phone is ELS-NX9 C432E8R6P1 but in the list kindly provided by Bender_007 can't find my phone: (C432E8R5P2) or (C432E7R4P1) - both NX9. In the FirmwareFinder can't find the bloody 131.
Edit: I'm from EU/Romania.
Last edited:
oh, I didn't know that about this Googlefier.
So anything Google related, there will be no notification until you actually open up the app?
Gmail no new e-mail.
Hangout no new message.
Calendar no event notification.
etc.
But Whatsapp notification is ok since it's not Google?
You will get Notification from Gmail. will not get notification from Most apps which are using (FCM)
Firebase Cloud Messaging
Do i understand it right that after google is working properly it is possible to upgrade firmware without the firmware blocking google? (I see a lot of people say so)
Is it just LZplay they have blocked? So when google is installed and we dont need Lzplay anymore we can update firmware?
I tought i needed to use old firmware for good now, but would be much better if i could have the new one!
Can someone please verify ?
Thnx!
Is it just LZplay they have blocked? So when google is installed and we dont need Lzplay anymore we can update firmware?
I tought i needed to use old firmware for good now, but would be much better if i could have the new one!
Can someone please verify ?
Thnx!
Does it still works fine after you updated back to EMUI 11? I am now using old firmware, and i want to update for security perposes, but i am afraid google will stop working then
From what I understand, if you ever need to change your password, switch your google account, got logged out for whatever reason, you will not be able to log back in again if you upgraded to a firmware that doesn't support Googlefier.Do i understand it right that after google is working properly it is possible to upgrade firmware without the firmware blocking google? (I see a lot of people say so)
Is it just LZplay they have blocked? So when google is installed and we dont need Lzplay anymore we can update firmware?
I tought i needed to use old firmware for good now, but would be much better if i could have the new one!
Can someone please verify ?
Thnx!
Since the only way to "login" is embedded in the Googlefier's process.
But googlefier works with never firmware? Isnt it is just LZplay that does not work?
I think Googlefier uses LZplay, Googlefier just takes all the steps to get the hack to work and puts it all down step by step. So you'll need a firmware that works with it, if you ever want to re-login for whatever reason.
ok, i tought it just used Lzplay to install google, not to add accounts and so on. But you may be right..
I don't know how exactly Googlefier and lzplay work, nor what they do, but here's what I did.
I went through all the steps of Googlefier, signed in with my spare account, gotten everything good, so I started firmware upgrading to latest. Since this was for my wife, I've signed out, and tried to get her to sign back in.
Error: Your account wasn't added. Try again.
I couldn't even sign back in with my spare account.
Then I had to downgrade all the way back down to a supported version, and redid everything from the start.
Hi, I got the Huawei matepad T8. I tried to download the googlefier and I cannot open the purple G app to proceed. What should I do?
But before i downgraded, i got to add google account and log in, it was just that google play didnt work. At least it told me it logged in. I dont think LZplay does that job, but i am not sure, i dont speak chinese so it is hard to know for sure..
Let me know if you or someone else found out it is ok to upgrade, i dont want to start all over again so iam gonna wait
I went through 30 pages of the forum so far and there seems to be a recurrent problem: HiSuite does not downgrade enough. In my case (Mediapad M6 Turbo), it either puts EMUI 11 on the device or takes it back to 10.1.xxx -- where I started. It doesn't downgrade to 10.0.xxx.
I have found the older firmware for my device that is required for Googlefier to work, [10.0.0.220(C00E210R1P10)] at mobilebaz. Are the two methods indicated in post #3 the only way to go at this point?
Kudos to the author for an amazing work -- it's making me suffer but I think I'll get there eventually
And guys... donate!
I have found the older firmware for my device that is required for Googlefier to work, [10.0.0.220(C00E210R1P10)] at mobilebaz. Are the two methods indicated in post #3 the only way to go at this point?
Kudos to the author for an amazing work -- it's making me suffer but I think I'll get there eventually
And guys... donate!
Hi, at first thanks for this very clear process, but I realized, this is not working with matepad 10.4 (BAH3-W09).
I downgraded successful to 10.0.118, but lzplay is not initialized.
After I read 20 pages of this thread, it looks like the (C432) version of matepad is not googlefiered with this method. Please, update the original post about this device to help others not spend much time with that.
I downgraded successful to 10.0.118, but lzplay is not initialized.
After I read 20 pages of this thread, it looks like the (C432) version of matepad is not googlefiered with this method. Please, update the original post about this device to help others not spend much time with that.
Last edited:
here is my current version i need help i tried all the versions below it does not work
P40 Pro
ELS-NX9
10.0.1.154 (C432E8R6P1)
P40 Pro
ELS-NX9
10.0.1.154 (C432E8R6P1)
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
46Wecome to Googlefier,
After a successful tool for LG G2 and LG G3 owners (AutoRec), but after a long pause, here is something new and I hope useful
Googlefier is a simple tool, designed to help you install GMS on your Huawei/Honor device
Video & Article - please take time to watch the video, answers some open questions
Check stats for your device here
Before asking any questions please read posts 2-5, check if your question has already been answered, in order to keep the thread clean.
Also - try to ask questions in some sense they are understandable
A simple: "IT doesn't work - will be ignored and possibly deleted, because it doesn't add to thread quality", instead you should describe the steps properly, and you will get an answer.
As always, any donation is highly appreciated and welcome, since a lot of time has been invested into this tool and in research
click ----> DOWNLOAD - click here to download <- Someone ddosed the server, which means the server is gone, thx a lot, I mean I don't have anything out of the downloads, I guess the person who ddosed the server had some incomes coming either from googlefier (since some sell it for 4-5 dollars) or it did hurt him in other way..thx a lot, good job!
Alternative DOWNLOAD from APKMIRROR <----
click ----> Donate - for support and future projects
P.S. Please DON'T reupload without permission
changelog:
27.10.2020 - Added contact fix (if you are installing it fresh you don't have to do anything to apply it) (if you already have running services - press the FIX button and then press FIX contact sync (it will ONLY fix the contact sync, nothing else))
credits:
microG - microg
EloYGomeZTv - microG fork + login10Firmware Downloads
Removed firmware requests, I don't have the bandwidth on easy-firmware, nor the time to constantly download-upload stuff, sorry
click ----> Donate - for support and future projects
---this post will change, be sure to visit it for some more firmware
Alternative link with all of the downloads: click here
9Downgrade Help
Downgrade via usb/sd
You NEED USB-OTG -> see the picture
Prerequisites
Where can I find the firmware?
Method 1
Note: If method 1 doesn't work, try method 2.
For troubleshooting – see the troubleshooting section
Method 2
you need HiSuite 10.0.0.510 (find it and download, install it)
1. -Open your dialer inside android
-type *#*#2846579#*#*
-tap on 2. "Veneer Informations"
-tap on 1. "Version Info"
-scroll down to "Base Software Version"
-You will see something like "JNY-LGRP2-OVS 10.0.1.108"
-Just ignore everything after LGRP2, means you need the "JNY-LGRP2" only
-Type "JNY-LGRP2" or any string you find in that info - into textbox from step 1(in the hisuite proxy) and press step 1
2. Find a suitable firmware, check that it's "FullOTA-MF" and not just OTA-MF, copy the url link next to the date, paste it into the "package url" inside the hisuite proxy
3. Copy the text which is next to the date, on the webpage - paste it to the "firmware version" inside the hisuite proxy
4. Press "Start proxy", connect the phone, authorize with HDB (you should know how to do that)
5. press update in HiSuite - It will download the older firmware and install it
Here is the image of how the procedure looks like: CLICK
DOWNLOAD Hisuite Proxy Modified
click ----> Donate - for support and future projects
---this post will change, be sure to visit it for alternative/different downgrade methods8Hi, at first thanks for this very clear process, but I realized, this is not working with matepad 10.4 (BAH3-W09).
I downgraded successful to 10.0.118, but lzplay is not initialized.
After I read 20 pages of this thread, it looks like the (C432) version of matepad is not googlefiered with this method. Please, update the original post about this device to help others not spend much time with that.7Q/A
7. I've hit the FIX button, but it doesn't fix a thing. Why do you lie to us?
-The fix button is there to assist you in fixing your own errors, you didn't follow the procedure.
-After you hit "fix", just read the instructions.
-After EVERY single services install do this:
*Open playstore, browse it, close playstore and all running apps from the recents menu
*Open sync settings, uncheck-and re-check the sync on/off settings
*Open playstore - install 2-3 apps, games...close playstore and all running apps from the recents menu
*Proceed with button 3, just like the message box instructs (until it says everything is done)
*still getting errors? Repeat..
13. Will this work on my device, version 154? or Will this work on my device, version XXX ?
-Yes and No. There are multiple factors. Depends if lzplay was at some time installed on this device - no matter what version it was on. If it was installed at for example version 106 and you made a FR, then YES you can still install even if on 154 or more recent. There is however a list of the devices that works by default and some that users report it works on.
14. Can I run it on my XXXX on my YYYY version?
-See this:
click ----> Donate - for support and future projects
---this post will change, be sure to visit it for more information
New posts
-
-
-
[ROM][OFFICIAL][redfin] LineageOS 20
- Latest: OttoUsualConsumer
