Looking through "settings list global", I noticed something that could be pertaining to WifiCalling.
wfc_ims_mode=1
I changed it with Tasker and AutoTools to 2 and then enabled and disabled airplane mode and it stuck!
I don't even believe you need root to change this setting.
---- NOTE ----
If you have never activated AutoTools Secure Settings, read this:
https://joaoapps.com/AutoApps/Help/...utotools.activity.ActivityConfigsettings.html
You might as well just skip to the adb section on this post (below) instead.
---------
A1: AutoTools Secure Settings [ Configuration:Setting Type: Global
Name: wfc_ims_mode
Input Type: Int
Value: 2
Read Setting: true Timeout (Seconds):60 ]
For those who don't know Tasker and AutoTools... Create a new task. Choose Plugins, then AutoTools, then secure settings.
Choose custom settings
Choose Setting type
Choose global
Ok
Choose Name
Fill in wfc_ims_mode
Ok
Choose input type
Int
Choose value
Fill in the number 2
Ok
Press the back button then the check mark on the top and the back button one more time
Press the play icon on the bottom left and wait for the small green circle on the left in the AutoTools line
Go to settings click more in the wireless area and see that it is now WiFi Preferred.
----- ADB INSTRUCTIONS -----
Enable ADB Debugging Mode in Developer options
Plug your phone in.
On your desktop, go to the command prompt and change directory into where you keep ADB.exe
If you have never connected your phone to adb, you'll have to allow it. Type adb shell and you'll notice a pop-up on your phone screen that asks for permission. Click yes and try the adb shell command again.
Then type this
settings put global wfc_ims_mode 2
Press enter.
For pros:
adb shell settings put global wfc_ims_mode 2
Look at your wireless settings (more menu) and you'll see that WiFi Preferred is active
-----------
Don't forget to toggle airplane mode and, it should be set to go. It persisted through a reboot, it will be interesting to see what else it persists through.
Sent from my Pixel XL using Tapatalk
wfc_ims_mode=1
I changed it with Tasker and AutoTools to 2 and then enabled and disabled airplane mode and it stuck!
I don't even believe you need root to change this setting.
---- NOTE ----
If you have never activated AutoTools Secure Settings, read this:
https://joaoapps.com/AutoApps/Help/...utotools.activity.ActivityConfigsettings.html
You might as well just skip to the adb section on this post (below) instead.
---------
A1: AutoTools Secure Settings [ Configuration:Setting Type: Global
Name: wfc_ims_mode
Input Type: Int
Value: 2
Read Setting: true Timeout (Seconds):60 ]
For those who don't know Tasker and AutoTools... Create a new task. Choose Plugins, then AutoTools, then secure settings.
Choose custom settings
Choose Setting type
Choose global
Ok
Choose Name
Fill in wfc_ims_mode
Ok
Choose input type
Int
Choose value
Fill in the number 2
Ok
Press the back button then the check mark on the top and the back button one more time
Press the play icon on the bottom left and wait for the small green circle on the left in the AutoTools line
Go to settings click more in the wireless area and see that it is now WiFi Preferred.
----- ADB INSTRUCTIONS -----
Enable ADB Debugging Mode in Developer options
Plug your phone in.
On your desktop, go to the command prompt and change directory into where you keep ADB.exe
If you have never connected your phone to adb, you'll have to allow it. Type adb shell and you'll notice a pop-up on your phone screen that asks for permission. Click yes and try the adb shell command again.
Then type this
settings put global wfc_ims_mode 2
Press enter.
For pros:
adb shell settings put global wfc_ims_mode 2
Look at your wireless settings (more menu) and you'll see that WiFi Preferred is active
-----------
Don't forget to toggle airplane mode and, it should be set to go. It persisted through a reboot, it will be interesting to see what else it persists through.
Sent from my Pixel XL using Tapatalk
Last edited: