[GSI][11][ EXYNOS4 SMDK4412 ][N8000, N801X, N8020, I9300, N5100, N51XX, N7100, ...][ALPHA] [EOL]

Search This thread

html6405

Recognized Developer
Here you will find my exynos4 compatible GSI's.

This work is based on the magic of @phhusson, so thank you very much for this.

Don't forget, that you need an treblelized ROM to support this.

  1. Install recent TWRP with GSI flash support (all mine have it)
  2. Install treblelized ROM for your device
  3. Download and unpack GSI
  4. Copy onto your internal storage
  5. Perform a factory reset
  6. Choose Install->Install Image->system-roar-arm32-binder64-ab-vanilla.img and select System Image.
  7. Swipe to confirm Flash
  8. Reboot
  9. Enjoy ;)

Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
it was again neccessary to buy a new SSD, it would be nice to help me out a little bit.
I'm doing this in my free time and it always costs a lot of money to buy hardware.

donate

This project is end of life, it was much fun to test some GSI's created for other devices on our good old exynos4,
but because of less spare time, I had to stop and will leave this as it is.
 
Last edited:

html6405

Recognized Developer
Just playing around with some foreign GSI's,

Screenshot_20210709-155717_Blissify_Launcher.png


Screenshot_20210709-155727_Settings.png
 

Guroff1974

Member
Oct 31, 2013
20
5
Domodedovo
Update 06.07.2021:
  • Uploaded first GSI with support for GT-I9300, GT-N8000, GT-N8010.
I don't understand my mistake. Can't install GSI.

1 Your LineAge 18.1 is installed from OTA 20210706 n8000

2 Your TWRP 3.5.0_9-0 is installed

3 Downloaded the GSI archive, unpacked and put xxxxx.IMG in the tablet memory.

4 Boot into TWRP

5 Did a reset and chose to install xxxxxx.IMG

6 Choice: Boot or Recovery

There is no System partition selection. Where is my mistake?
 

Attachments

  • 20210714_141755.jpg
    20210714_141755.jpg
    1.1 MB · Views: 192

html6405

Recognized Developer

Top Liked Posts

  • There are no posts matching your filters.
  • 19
    Here you will find my exynos4 compatible GSI's.

    This work is based on the magic of @phhusson, so thank you very much for this.

    Don't forget, that you need an treblelized ROM to support this.

    1. Install recent TWRP with GSI flash support (all mine have it)
    2. Install treblelized ROM for your device
    3. Download and unpack GSI
    4. Copy onto your internal storage
    5. Perform a factory reset
    6. Choose Install->Install Image->system-roar-arm32-binder64-ab-vanilla.img and select System Image.
    7. Swipe to confirm Flash
    8. Reboot
    9. Enjoy ;)

    Do you like my work?
    Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
    it was again neccessary to buy a new SSD, it would be nice to help me out a little bit.
    I'm doing this in my free time and it always costs a lot of money to buy hardware.

    donate

    This project is end of life, it was much fun to test some GSI's created for other devices on our good old exynos4,
    but because of less spare time, I had to stop and will leave this as it is.
    5
    Just playing around with some foreign GSI's,

    Screenshot_20210709-155717_Blissify_Launcher.png


    Screenshot_20210709-155727_Settings.png
    3

    Coming soon...
    3
    Why not submit the patches to PHH side? Do they break other devices?
    I will ask phusson, at least the most recent patches shouldn't break other devices.

    EDIT: I've asked him, lets hope for the best :).
    2
    Update 06.07.2021:
    • Uploaded first GSI with support for GT-I9300, GT-N8000, GT-N8010.
    I don't understand my mistake. Can't install GSI.

    1 Your LineAge 18.1 is installed from OTA 20210706 n8000

    2 Your TWRP 3.5.0_9-0 is installed

    3 Downloaded the GSI archive, unpacked and put xxxxx.IMG in the tablet memory.

    4 Boot into TWRP

    5 Did a reset and chose to install xxxxxx.IMG

    6 Choice: Boot or Recovery

    There is no System partition selection. Where is my mistake?