I wasn't on anything, I was following your guide from scratch because it was the first time I'm flashing GSI.
I'm in panic mode because I flashed the Stock ROM no problem, erased data, flashed vbmeta.img per the instructions, but now the CMD window is stuck on the "sending sparse system_a" after resizing system_a. I'm quite unsure what I should do.
I should still be on the default recovery seeing as I flashed stock without booting to it
Edit: It is still in fastbootd mode, the screen just went off, I needed to touch the screen to confirm it
Edit2: I'm more calm now, since the device is still on Fastbootd mode from the Stock ROM it means I can just... Not touch the device itself, right?
I'm thinking about:
- Closing the CMD window as it seems to be stuck
- Reboot my computer, to be sure the old process is dead
- Reinstall the Drivers just to be sure(I don't think there's anything wrong since it flashed stock with no problem, but you never know
- Reboot it again to be absolutely sure
- fastboot reboot fastboot
- fastboot flash system lineagenameistoolong.img
Is this okay? The phone will never boot into the stock ROM as it appears that it was at very least resized, so I'm afraid of touching it right now