[GT-I9001][ROM][ION][5.0.2][LRX22G] CyanogenMod 12.0 by ADC-Team [02/04/2015][EOL]
- Thread starter Christopher83
- Start date
-
- Tags
- cm-12.0 ion kernel 3.4 lollipop 5.0
I expressed myself badly, sorry, the auto brightness not work.
---------- Post added at 01:02 PM ---------- Previous post was at 01:00 PM ----------
---------- Post added at 01:02 PM ---------- Previous post was at 01:00 PM ----------
I expressed myself badly, sorry, the auto brightness not work.
Root issue
First time here so I'll begin with: Great work
I appreciate it.
I have done clean install of CM12 (20150208 rev)+ K^Kernel+ nano gapps but I can't make root to work properly (CM11 works flawlessly). Other functionalities of system are working - laggy config but after restart it gains speed.
In terminal emulator after typing su it returns 255|u0_a56@ariesve:/ without asking for permissions.
Fixing permissions in TWRP made phone to hang on CM animation screen.
Root Checker (joeykrim) says the device is not rooted but Kingo Root says it has root. Rooting from TWRP or re-rooting by Kingo Root doesn't help.
Tomorrow I'll try with the latest release.
First time here so I'll begin with: Great work
I appreciate it.I have done clean install of CM12 (20150208 rev)+ K^Kernel+ nano gapps but I can't make root to work properly (CM11 works flawlessly). Other functionalities of system are working - laggy config but after restart it gains speed.
In terminal emulator after typing su it returns 255|u0_a56@ariesve:/ without asking for permissions.
Fixing permissions in TWRP made phone to hang on CM animation screen.
Root Checker (joeykrim) says the device is not rooted but Kingo Root says it has root. Rooting from TWRP or re-rooting by Kingo Root doesn't help.
Tomorrow I'll try with the latest release.
Read post #2 for enable root.First time here so I'll begin with: Great work
I have done clean install of CM12 (20150208 rev)+ K^Kernel+ nano gapps but I can't make root to work properly (CM11 works flawlessly). Other functionalities of system are working - laggy config but after restart it gains speed.
In terminal emulator after typing su it returns 255|u0_a56@ariesve:/ without asking for permissions.
Fixing permissions in TWRP made phone to hang on CM animation screen.
Root Checker (joeykrim) says the device is not rooted but Kingo Root says it has root. Rooting from TWRP or re-rooting by Kingo Root doesn't help.
Tomorrow I'll try with the latest release.
First time here so I'll begin with: Great work
I have done clean install of CM12 (20150208 rev)+ K^Kernel+ nano gapps but I can't make root to work properly (CM11 works flawlessly). Other functionalities of system are working - laggy config but after restart it gains speed.
In terminal emulator after typing su it returns 255|u0_a56@ariesve:/ without asking for permissions.
Fixing permissions in TWRP made phone to hang on CM animation screen.
Root Checker (joeykrim) says the device is not rooted but Kingo Root says it has root. Rooting from TWRP or re-rooting by Kingo Root doesn't help.
...And please don't use the fix permission in TWRP.
It is not necessary and can sometimes happen what happened to you, stuck in boot animation.
Ok. A clean install, and problems are solved. After 20+ updates is the first time that I have this problem. Thx :good:
It 's true I had forgotten. :good:
Fix Permission - explanation
By chance, I remembered but out of curiosity I used the search button on this thread, and I found this very useful post with a better explanation given by our friend and also amazing developer, educk :good:
A big thanks for him :highfive:
By chance, I remembered
but out of curiosity I used the search button on this thread, and I found this very useful post with a better explanation given by our friend and also amazing developer, educk :good: A big thanks for him :highfive:
I was wondering from where you got the idea... In the installation instructions for CM12 (from the OP of this thread) there is no 'Fix Permissions' step, furthermore there is no reference to it in Lollipop K^Kernel installation instructions (also present in the OP of the respective thread). Therefore, I assume that Christopher used an old updater-script from back in Jelly-Bean times where we used some modules which required fixing permissions (if I remember correctly). This updater-script didn't need any update when moving from Jelly-Bean to Kitkat or to Lollipop as it only displays some messages and tells the recovery the boot partition, that's why the message was there.
Last edited:
By chance, I remembered
A big thanks for him :highfive:
Here is the full post:
Thank you for pointing this out! :highfive:
Root and fixing permisions
I will skip multi quotes just will say thank you for advices.
Fixing permissions might popped up along with the info to clear cache in installation of gaaps (nano) if it is not in K^Kernel or CM12 itself. I was just trying different things as I missed the part about root setting in FAQ (just blind as I went twice through it) and it has changed from CM11.
I will skip multi quotes just will say thank you for advices.
Fixing permissions might popped up along with the info to clear cache in installation of gaaps (nano) if it is not in K^Kernel or CM12 itself. I was just trying different things as I missed the part about root setting in FAQ (just blind as I went twice through it)
and it has changed from CM11.Great work, just flashed the beta version an after a few reboots, its working great. Great great effort by the devs. And a huge thanks for reawakening a dead device.
Is there anyway to disable guest account, unnecessary space usage and device hangs too much while switching (accidentally switching is also a problem)
---------- Post added at 11:19 AM ---------- Previous post was at 10:27 AM ----------
Unable to unpin, the screen keeps popping press and hold back and overview button, but nothing happening. Is there anyway other than rebooting to unpin the screen..?
There are two ways you can unpin screen
1st.Use on screen buttons to unpin
2nd.Reboot your device.
There are two ways you can unpin screen
1st.Use on screen buttons to unpin
2nd.Reboot your device.
Dude, what on screen buttons, this thread is of sgs plus!
Compare 5.0.2 to 4.4.4 > your experience please
Hello Guys,
I am wondering if i should move from my 4.4.4 to this 5.0.2
Can you please describe wha are the best benefits fro you ( battery, response time, features etc... ) : not theorical but in real practive ?
THANKS A LOT THIS WOULD HELP ME :good:
best regards
Eric :angel:
Hello Guys,
I am wondering if i should move from my 4.4.4 to this 5.0.2
Can you please describe wha are the best benefits fro you ( battery, response time, features etc... ) : not theorical but in real practive ?
THANKS A LOT THIS WOULD HELP ME :good:
best regards
Eric :angel:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
219
Hi everyone,
I'm proud to present our build of CyanogenMod 12.0 for the Galaxy S Plus (GT-I9001).
Pay attention:
Since the canonical partitions of our device have insufficient space suitable to satisfy Android L requirements, it has been needed to reorganize partition assignments and to use internal sdcard as new data partition.
The internal sd card is now emulated and shares the available space of data partition.
By doing so, we have plenty of space for system (1.3 GB), cache (520 MB) and data + internal sd (4.7 GB) partitions.
Working features:
- Audio
- Receiving and making calls
- GPS
- Hardware sensors (Light, Orientation, Compass, Proximity, Acceleration)
- Legacy sensors / Virtual sensors (Gravity, Linear acceleration, Rotation vector)
- Wifi
- Bluetooth
- MTP storage
- HW accelerated gui
- HW accelerated video
- Camera
- Voip video calls
- BLNv10
- USB/Wifi tethering
- VSync
- Phantom key presses filtering
- USB OTG (check here for the needed Y cable)
- MicroSD exFAT support
- zRam
- F2FS support for /data partition
- Video recording at 720p quality may cause a force close of Camera app, so it's better to use 480p quality until this issue will be fixed
- Nothing at the moment...
Disclaimer:
How to install the rom:
If you're coming from a stock rom, a previous Android version (CM 9, CM 10, CM 10.1, CM 10.2 and derivatives) or if you have a CM 11.0 older than Release 15, read carefully the following steps
- Download the rom, gapps and the new TWRP recovery (its mandatory)
- If you have an external sd, you may already copy the downloaded files on it, please don't flash anything yet, read the following steps
- Backup your data, like call history, contacts, sms, favourite app settings inside external sd (by using Titanium Backup or other apps available on PlayStore)
- Backup your internal sd content, because all its content will be lost (you may copy the full content on a pc or inside a new folder of your external sd)
- If you have WhatsApp, copy the folder /sdcard/WhatsApp inside /external_sd/Whatsapp, so you are ready to restore all your conversations after the re-installation of the app
- Copy the content of the folder /sdcard/DCIM inside /external_sd/DCIM, so your taken pictures stored inside internal sdcard will be preserved
- Reboot inside CWM or TWRP recovery which not includes new partition assignments
- Perform a nandroid backup inside external sdcard (inside TWRP, Backup -> Select all the partitions -> Select Micro SD card as storage -> Swipe)
- Install the new TWRP recovery that includes new partition assignments
- Reboot inside TWRP recovery again, because now you must be sure to use the new one (inside TWRP, Home -> Reboot -> Recovery)
- Wipe Data as ext4 or f2fs partition (Wipe -> Advanced Wipe -> Select Data -> Repair or Change File System -> Change File System -> EXT4 or F2FS -> Swipe)
- Wipe Dalvik Cache, Cache, System and Android Secure (inside Wipe -> Advanced Wipe)
- If you haven't copied the installation files yet, be sure that MTP is enabled (inside Mounts, click on Enable MTP), then, from your pc, copy the files inside internal sd or external sd
- Install the rom package
- Install the gapps package
- Reboot the system
- If you performed a backup with an app, on external sd or on pc, you may restore the saved data and copy/move /external_sd/Whatsapp folder to /sdcard/Whatsapp again
- Enjoy Lollipop
- Reboot inside recovery (always the new one)
- Install the rom update
- Reboot the system
Downloads:
- TWRP 2.8.1.0 recovery [17/01/2015]: [DevHost Mirror] [MediaFire Mirror]
MD5: f0c43dc355571554be6d0bad047c94cd
Note: This recovery includes new partition assignments and supports F2FS partitions - Android 5.0 Gapps: [Consolidated Gapps]
Choose the ones you prefer...
[*] CM 12.0 Beta [02/04/2015]: [DevHost Mirror] [MediaFire Mirror]
MD5: 06ea7a4313d00d694b15efdc181f9caa
[*] Stock Kernel [02/04/2015]: [DevHost Mirror] [MediaFire Mirror]Code:- Lollipop 5.0.2 (LRX22G) - Synched with latest CyanogenMod 12.0 sources [B]device/samsung/ariesve[/B] - prop: Add property to indicate we support usb-otg (credits to sirmordred) - camera: Modify base.common.version API define (credits to arco68) - Revert "device: Move AAPT config to cm.mk" (credits to Christopher83) - device: Disable HW MP3 decoder (credits to sirmordred) - media_profiles: [TEMP] temporarly disable 720p recording for back camera (credits to sirmordred) - BoardConfig: Enable another healthd charger option (credits to sirmordred) - liblights: Some updates (credits to sirmordred) - liblights: Additional changes (credits to Christopher83) - device: Removed deprecated egl.cfg (credits to sirmordred) - prop: Disable offload audio (credits to arco68) - rootdir: Increase zram disk size to 256mb on 512mb devices (credits to arco68) - rootdir: Increase Swappiness to 100 (credits to arco68) - device: Add support for display color calibration (KCAL) (credits to arco68) [B]kernel/samsung/msm7x30[/B] - USB: gadget: qdss: Fix strncmp length usage (credits to Kumar Gala) - msm: camera: Increased MAX_PMEM_CFG_BUFFERS (credits to sirmordred) - Revert "msm_fb: Fix backlight issue on ancora and ancora_tmo" (credits to sirmordred) - nl80211: Correct the usage of command NL80211_CMD_VENDOR (credits to Sunil Dutt) - nl80211: Fix backport of struct wiphy_vendor_command (credits to Jeff Johnson) - fs/proc/task_mmu.c: add user-space support for resetting mm->hiwater_rss (peak RSS) (credits to Petr Cermak) - Set the iif for IPv6 packets as well. (credits to Lorenzo Colitti) - net: ipv6: make "ip -6 route get mark xyz" work. (credits to Lorenzo Colitti) - diag: Make fixes to diag_switch_logging (credits to Ravi Aravamudhan) - seq_file: always update file->f_pos in seq_lseek() (credits to Devin Kim) - cgroup: remove synchronize_rcu() from cgroup_attach_{task|proc}() (credits to Devin Kim) - vfs: check if f_count is 0 or negative (credits to Shengzhe Zhao) - msm_fb: Fix GC & IGC LUT (credits to Blefish) - msm_fb: Enable MDP4 IGC LUT (credits to Blefish) - msm_fb: Add KCAL interface (credits to Blefish) - drivers: Updated vibrator driver (credits to sirmordred) - msm: camera: Updated ledflash driver (credits to sirmordred) - Revert "drivers: usb: Use Android device as USB keyboard/mouse" (credits to sirmordred) - drivers: video: ancora: Fixed indentation and cleaned up whitespaces (credits to sirmordred) - mmc: core: Increased timeout limits to improve handling of bad sd cards (credits to sirmordred) - drivers: input: melfas: Add keydisabler (credits to sirmordred)
MD5: 732fde8a5e962f6ac8686576c5cd6df8
Note: This stock kernel is already included inside the rom, it's provided in case you installed a custom kernel and would like to re-install the stock one
Old Builds:
Sources:
Credits and Thanks to:
CyanogenMod Team for the huge work
arco68, Christophe83, CastagnaIT, krislibaeer, ivendor, educk for their development on this device
mikeioannina, Blefish for their development on other legacy devices
TKruzze for PA Google Gapps packages
ktulu84, Rhonin86, smeroni68, XeLLaR* for their help in testing
Nello96 for the team logo
XDA:DevDB Information
[GT-I9001][LP 5.0.2] CyanogenMod 12.0 by ADC-Team - Kernel 3.4.x, ROM for the Samsung Galaxy S Plus I9001
Contributors
Christopher83, DevConnection_Team, arco68, CastagnaIT, mikeioannina, Blefish, krislibaeer, ktulu84, Rhonin86, smeroni68, XeLLaR*, sirmordred
Source Code: https://github.com/AriesVE-DevCon-TEAM
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP Recovery that includes new partition assignments
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 04
Beta Release Date: 2015-04-02
Created 2014-12-13
Last Updated 2015-06-0868Screenshots:
Frequently Asked Questions:
- My device keeps on booting inside recovery instead of rebooting the system, what I can do?
If you have recovery bootloop problem, you should take a look at this post - How can I use BackLightNotifications feature?
BLNv10 is activable/deactivable from AriesParts (Advanced Settings) or BLN Control Application (Free or Pro version) - Is the new recovery compatible with an old rom (CM 11.0, CM 10.2, CM 10.1, and previous)?
No, the new recovery is compatible only with new CM 12.0 rom, CM 11.0 Release 15 and next releases. If you want to restore a previous backup taken with an old recovery (without partition reassignments), you should re-install the old recovery first, reboot inside recovery again and then restore the backup. - What does the emulated internal sd card mean and where my files are stored on it?
The emulated internal sd card is a special folder (/data/media) available inside data partition and also simlinked to /sdcard, it's recognized as a FAT storage and can be used in place of the previous internal sd card. The emulated sd card shares the available space of data partition, but it's not wiped when you choose to wipe Data from recovery. - How can I get the transparent status bar and transparent lock screen background?
By default, these features are disabled, because they are available for non lowram devices only, but you can enable them by activating Force High-End GFX switch inside Settings -> Performance or Advanced Settings app (a reboot is needed). - How can I enable Developer options?
You can enable this menu section by tapping 7 times on Build number inside Settings -> About phone. - How can I enable Root Access for apps?
You can enable it inside Settings -> Developer Options -> Root Access, set it to Apps only or Apps and ADB.
The granted root permissions for any app can be found inside Settings -> Privacy -> Privacy Guard, then long press on the app to show or manage its permissions. - How can I enable Advanced Reboot options?
You can enable the Advanced Reboot options inside Developer options. - What is Battery saver feature and how can I enable it?
This is a new feature of Android L that allows to improve the battery life by reducing the device's performance, limiting vibration, most background data and limiting the synchronization for emails, messaging, etc... It can be enabled when the device is not charging inside Settings -> Battery -> Top left menu -> Battery saver. - I cannot mount internal SD card via mass storage, how can I fix this issue?
You must use MTP protocol since emulated sd doesn't support mass storage.
This is common on all devices with an emulated sd, that's why the mainly supported protocol is now MTP (expecially on Lollipop). - During a reboot the system shows "Optimizing Apps" again, why?
As arco68 said, the optimizing apps on second boot is TRIM running. Google changed this in 5.0.2, so now it runs automatically once a day, either during the night while phone is charging or after you reboot. - Music app (Eleven) force closes during start or shows duplicated artists, albums, songs, how can I fix this?
Probably one of the databases of media provider is corrupted or contains wrong data, try to delete the content of /data/data/com.android.providers.media/database, perform a reboot and test music app again. - I cannot connect to my wifi router, how can I fix this issue?
It has been reported that inside some country regions is not possible to successfully connect to wifi router.
If you have this problem, check your wifi router configuration and try to switch from WPA2 to WPA security.
This possible workaround has been reported by an Iranian user. - I'd like to go back to CM 11.0 Release 15 or a next CM 11.0 release, what should I do?
- Reboot inside recovery
- Wipe Cache, Dalvik Cache, Data, System, Android Secure
- Perform the restore or the clean installation of CM 11.0 - I'd like to go back to CM 11.0 Release 14 or a previous Android version, what should I do?
- Reboot inside recovery
- Wipe Cache, Dalvik Cache, Data, System, Android Secure
- Reinstall old recovery (without partition reassignments)
- Reboot inside the old recovery (Home -> Reboot -> Recovery)
- Inside Advanced Wipe menu wipe SDcard as FAT partition (Wipe -> Advanced Wipe -> Select SDcard -> Repair or Change File System -> Change File System -> FAT -> Swipe)
- Perform the restore or the clean installation of the old Android system - What is F2FS file system?
F2FS (Flash-Friendly File System) is a new file system designed for delivering maximum file-system performance on flash-based storage devices. For more info: F2FS - How can I switch to F2FS format type for /data partition without loosing data?
By switching from EXT4 to F2FS format type for /data partition, without performing any backup, you will surely lost all your user data files and internal sd content.
To avoid that, follow these steps:
- Perform a backup of your internal sd (/sdcard) by copying the /sdcard content inside a new folder on /external_sd or on your pc (through MTP)
- Reboot into recovery
- Install latest TWRP recovery with F2FS support
- Reboot -> Recovery to reboot inside the newly installed recovery
- Perform a full backup of your current configuration, inside Backup -> Flag all partitions -> Set a customized name if you want -> Set Micro SD card as storage -> Swipe to Backup
- After the backup process has completed, go inside Wipe -> Advanced Wipe -> Select Dalvik Cache, System, Cache -> Swipe to Wipe
- Always inside Wipe -> Advanced Wipe -> Select Data -> Repair or Change File System -> Change File System -> F2FS -> Swipe to Change
- Install new rom and gapps
- Restore your data partition from previously made backup, Restore -> Select latest backup -> Select Data only -> Swipe to Restore (don't care about ext4 warnings)
- Restore your /sdcard backup
- Reboot System
- Check if your data is using F2FS format type by running the following command inside Terminal Emulator or through ADB:
If everything is ok, you should getCode:mount | grep f2fs
Code:/dev/block/mmcblk0p28 /data f2fs <various comma separated options>
47CyanogenMod 12.0 by ADC-Team [Alpha 30/12/2014]
CyanogenMod 12.0 by ADC-Team [Alpha 30/12/2014]
Code:- Lollipop 5.0.2 (LRX22G) - Synched with latest CyanogenMod 12.0 sources [B]device/samsung/ariesve[/B] - ril: Ignore call for RIL.getHardwareConfig (credits to Ian Roy) - device: Add F2FS packages (credits to arco68) - AriesParts: Add an option for USB-OTG charge mode (credits to tobigun) - AriesParts: Add a switch for A2DP sink (credits to tobigun) - AriesParts: Update German translation (credits to tobigun) - AriesParts: Store persisted props inside /data/property (credits to Christopher83) - AriesParts: Store A2DP sink status also inside build.prop and /data/property (credits to Christopher83) - AriesParts: Add common methods to show error and reboot alerts (credits to Christopher83) - AriesParts: Add a common method to check if the system is supported (credits to Christopher83) - AriesParts: Add a switch for High-End GFX (credits to Christopher83) - AriesParts: Update German translation (credits to Christopher83) - AriesParts: Update Italian translation (credits to Christopher83) - AriesParts: Add a dedicated tab for Performance options (credits to Christopher83) [B]build[/B], [B]packages/apps/Dialer[/B], [B]packages/apps/InCallUI[/B] - Keep InCallUI in memory (credits to Pawit Pornkitprasan) Ported from CM 11.0, it allows to have a faster in-call user interface when making/receiving calls [B]kernel[/B] - Kernel 3.4.105 - i2c: chips: fsa9480: Add write-permission for USB-OTG charger type (credits to tobigun) - Staging: android: binder: More offset validation. (credits to Arve Hjonnevag) - fs: f2fs: Initial import from https://kernel.googlesource.com (credits to arco68) - defconfig: Enable F2FS filesystem (credits to arco68)
Happy New Year!
41How to perform the calibration of Magnetic / Acceleration / Orientation Sensors
- Horizontal Calibration:
Open Advanced Settings and select Horizontal Calibration, place the phone over a flat and horizontal surface, then press Calibrate.
- Magnetic Field Calibration
After installing a compass app or another app that uses the magnetic sensor, open that and perform an 8 shape, as shown in this video.
The calibration movement is a combined one over all axes and will result in a residual magnetism removal (reset), please perform a slow movement, it's not important the direction you'll follow, just do once or more times until you get the correct calibration.
To know if the calibration is correct, you must know where is approximately the North and look with a compass app if the needle is pointing there. If it's so, try rotating the phone of 90, 180, 270 degree, finally go back to 360 degrees and look if the needle is pointing always to North during the performed rotation.
If this easy test give positive results, your magnetic sensor has been correctly calibrated.
- After performing the above calibrations, the orientation and magnetic field sensors will give the correct values with all apps.
- Our phone is known to have a native shift of some degrees respect to the North, but this is a hardware limitation due probably to the orientation of the chip welded on the board.
- This procedure can be used also after a new flash of a compatible custom kernel in case the sensors are not correctly working.
Legacy Sensors / Virtual Sensors
These sensors are called virtual, because our device hasn't a real hardware chip for them, but by utilizing some data processing techniques and by merging the values coming from accelerometer and magnetic field sensors, it's possible to extrapolate the approximated values of these virtual sensors.
Please note that not all apps support the virtual sensors, to perform a test we suggest the app S Tools+.41Please, read carefully all the opening post content, you must follow the installation instructions to avoid any problem...
My custom kernel for CM 12.0 will be available in the future, I think that's important to have a good working rom first.
I wish you a nice week end!
New posts
-
[ROM] [OFFICIAL] LineageOS for the Shield Android TV
- Latest: Rienquejefourretago
-
