[GT-I930x/T/N][SHV-E210*][SHW-M440S] CF-Auto-Root

Search This thread

Chainfire

Moderator Emeritus / Senior Recognized Developer
Oct 2, 2007
11,443
87,747
www.chainfire.eu
Check your device model ! Settings -> About device -> Model number. See the third post for exact supported model numbers. If your device is a totally different model, it will not work (may even brick) !



CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root.

Donate
CF-Root has been available for many devices and has clocked over 8 million downloads. This is not even counting custom ROMs that already include it. Don't be a leech, buy me a beer (and use the "Thanks" button!). Imagine if every CF-Root user has donated me $1...

What's installed
- SuperSU binary and APK
- Stock recovery

Installation and usage
Flash the CF-Auto-Root package as PDA in ODIN (details on how to do that are in next post), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.

If you don't get to the red Android logo, boot into recovery manually ("adb reboot recovery", or boot while holding Power+VolUp+Home).

Using this root increases your flash counter. You should run Triangle Away (see below) after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Did you see the red Android logo during rooting, but SuperSU does not appear? This may sometimes occur due to left-over files and settings, however, you can usually install SuperSU from Google Play at this stage and it'll just work.

Not included - Triangle Away
Triangle Away can be used to reset the flash counter after installing CF-Root. The flash counter keeps track of how many custom firmwares you have flashed, as this voids warranty. (No idea what this about ? Read up on it, you will want to use this !)

Not included - adbd Insecure
As this CF-Root does not include a custom kernel, adb shell does not have root access by default (you can still get it by typing su inside the shell), nor is adb remount supported, nor will adb push and adb pull work on system files. adbd Insecure can be used to remedy this situation. (No idea what this is about ? Don't worry about it !)

CF-Auto-Root homepage
http://autoroot.chainfire.eu/

CF-Auto-Root main thread
[CENTRAL] CF-Auto-Root
For requests for new roots and generic discussion - please keep device specific discussion in the thread you are viewing now.

No CWM and such ?
I have personally moved away from permanent custom recoveries, and I am no longer supporting them. On newer devices they cause flash counter and OTA flashing issues. If you really want one, others do provide versions of CWM and TWRP for most devices. Personally I just use Mobile ODIN to install ZIPs and Titanium Backup for my backup/restore needs. I do always want root though, and as such I'm still supporting CF-Auto-Root as quick way to root.
 
Last edited:

Chainfire

Moderator Emeritus / Senior Recognized Developer
Oct 2, 2007
11,443
87,747
www.chainfire.eu
ODIN Installation (detailed)

- Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Unzip the attached Odin3-vX.X.zip file
- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)

- NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.

New to Samsung? Unfamiliar with Odin? Think all the above is a hassle? Get used to it. It's very simple, and us Samsung folk use Odin (or Mobile ODIN ;)) for everything! It's so very very convenient once you get used to it. Notice the 30 second comment above? For experienced users, the entire process indeed takes only 30 seconds!

You may now optionally want to install and run Triangle Away to reset the flash counter.
 

Attachments

  • Odin3-v1.85.zip
    198.6 KB · Views: 369,509
Last edited:

Chainfire

Moderator Emeritus / Senior Recognized Developer
Oct 2, 2007
11,443
87,747
www.chainfire.eu
2013.05.20 --- CF-Auto-Root

SuperSU: v1.30

Download:

GT-I9300: CF-Auto-Root-m0-m0xx-gti9300.zip
GT-I9300T: CF-Auto-Root-m0-m0du-gti9300t.zip
GT-I9305: CF-Auto-Root-m3-m3zh-gti9305.zip
GT-I9305T: CF-Auto-Root-m3-m3dv-gti9305t.zip
GT-I9305N: CF-Auto-Root-m3-m3swexx-gti9305n.zip

SHV-E210K: CF-Auto-Root-c1ktt-c1ktt-shve210k.zip
SHV-E210L: CF-Auto-Root-c1lgt-c1lgt-shve210l.zip
SHV-E210S: CF-Auto-Root-c1skt-c1skt-shve210s.zip

SHW-M440S: CF-Auto-Root-m0skt-m0skt-shwm440s.zip

--- History ---

2013.05.20: SuperSU v1.30
2013.02.20: SuperSU v1.05
2012.12.02: SuperSU v0.98
2012.10.26: SuperSU v0.96
 
Last edited:

jb.traveller

Senior Member
Oct 26, 2011
252
29
Hitchin
Hi Chainfire, I do have your Mobile odin Pro and triange away ( Two great apps ) , so what iam asking is do I need this?
 
Last edited:

DroidRevenge

Senior Member
Nov 8, 2010
2,741
741
XDA-Developers
  • Like
Reactions: cottino

disclaimernotice

Senior Member
Sep 8, 2011
449
139
So basically the reason we don't want a custom recovery is because it will always increase the flash counter on each boot?
 

saintsinner25

Senior Member
Mar 25, 2011
1,478
303
Jaipur
read first post.

---------- Post added at 11:02 PM ---------- Previous post was at 11:01 PM ----------



so you also can't understand.
congratulations...

Uh its really confusing man.i know alot about these things but this really confusing.

Sent From My GT-i9300 ;)

---------- Post added at 03:26 AM ---------- Previous post was at 03:25 AM ----------

read first post.

---------- Post added at 11:02 PM ---------- Previous post was at 11:01 PM ----------



so you also can't understand.
congratulations...

You don't need to be freakin disrespectful.and you are not humorous by any chance.i asked a simple question.if you cant/don't want to answer it don't?

Sent From My GT-i9300 ;)

---------- Post added at 03:34 AM ---------- Previous post was at 03:26 AM ----------

Ok..so this is basically root without cwm? So that you can later on flash any other recovery of your own choice to flash other roms?

Sent From My GT-i9300 ;)
 

Krep3

Senior Member
Aug 22, 2012
100
6
No CWM and such ?
I have personally moved away from permanent custom recoveries, and I am no longer supporting them. On newer devices they cause flash counter and OTA flashing issues. If you really want one, others do provide versions of CWM and TWRP for most devices. Personally I just use Mobile ODIN to install ZIPs and Titanium Backup for my backup/restore needs. I do always want root though, and as such I'm still supporting CF-Auto-Root as quick way to root.

So if i use this root method instead of the previous one wich included CWM and run triangle away after, my phone will be completely stock and everything will read samsung official and not modified???? will i be able to update using KIES????
 
  • Like
Reactions: vfwsxe

Top Liked Posts

  • There are no posts matching your filters.
  • 632
    Check your device model ! Settings -> About device -> Model number. See the third post for exact supported model numbers. If your device is a totally different model, it will not work (may even brick) !



    CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root.

    Donate
    CF-Root has been available for many devices and has clocked over 8 million downloads. This is not even counting custom ROMs that already include it. Don't be a leech, buy me a beer (and use the "Thanks" button!). Imagine if every CF-Root user has donated me $1...

    What's installed
    - SuperSU binary and APK
    - Stock recovery

    Installation and usage
    Flash the CF-Auto-Root package as PDA in ODIN (details on how to do that are in next post), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.

    If you don't get to the red Android logo, boot into recovery manually ("adb reboot recovery", or boot while holding Power+VolUp+Home).

    Using this root increases your flash counter. You should run Triangle Away (see below) after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

    Did you see the red Android logo during rooting, but SuperSU does not appear? This may sometimes occur due to left-over files and settings, however, you can usually install SuperSU from Google Play at this stage and it'll just work.

    Not included - Triangle Away
    Triangle Away can be used to reset the flash counter after installing CF-Root. The flash counter keeps track of how many custom firmwares you have flashed, as this voids warranty. (No idea what this about ? Read up on it, you will want to use this !)

    Not included - adbd Insecure
    As this CF-Root does not include a custom kernel, adb shell does not have root access by default (you can still get it by typing su inside the shell), nor is adb remount supported, nor will adb push and adb pull work on system files. adbd Insecure can be used to remedy this situation. (No idea what this is about ? Don't worry about it !)

    CF-Auto-Root homepage
    http://autoroot.chainfire.eu/

    CF-Auto-Root main thread
    [CENTRAL] CF-Auto-Root
    For requests for new roots and generic discussion - please keep device specific discussion in the thread you are viewing now.

    No CWM and such ?
    I have personally moved away from permanent custom recoveries, and I am no longer supporting them. On newer devices they cause flash counter and OTA flashing issues. If you really want one, others do provide versions of CWM and TWRP for most devices. Personally I just use Mobile ODIN to install ZIPs and Titanium Backup for my backup/restore needs. I do always want root though, and as such I'm still supporting CF-Auto-Root as quick way to root.
    308
    ODIN Installation (detailed)

    - Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
    - Unzip the attached Odin3-vX.X.zip file
    - Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
    - If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
    - (USB) Disconnect your phone from your computer
    - Start Odin3-vX.X.exe
    - Click the PDA button, and select CF-Auto-Root-....tar.md5
    - Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
    - (USB) Connect the phone to your computer
    - Make sure Repartition is NOT checked
    - Click the Start button
    - Wait for Android to boot
    - Done (if it took you more than 30 seconds, you need practise!)

    - NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.

    New to Samsung? Unfamiliar with Odin? Think all the above is a hassle? Get used to it. It's very simple, and us Samsung folk use Odin (or Mobile ODIN ;)) for everything! It's so very very convenient once you get used to it. Notice the 30 second comment above? For experienced users, the entire process indeed takes only 30 seconds!

    You may now optionally want to install and run Triangle Away to reset the flash counter.
    265
    2013.05.20 --- CF-Auto-Root

    SuperSU: v1.30

    Download:

    GT-I9300: CF-Auto-Root-m0-m0xx-gti9300.zip
    GT-I9300T: CF-Auto-Root-m0-m0du-gti9300t.zip
    GT-I9305: CF-Auto-Root-m3-m3zh-gti9305.zip
    GT-I9305T: CF-Auto-Root-m3-m3dv-gti9305t.zip
    GT-I9305N: CF-Auto-Root-m3-m3swexx-gti9305n.zip

    SHV-E210K: CF-Auto-Root-c1ktt-c1ktt-shve210k.zip
    SHV-E210L: CF-Auto-Root-c1lgt-c1lgt-shve210l.zip
    SHV-E210S: CF-Auto-Root-c1skt-c1skt-shve210s.zip

    SHW-M440S: CF-Auto-Root-m0skt-m0skt-shwm440s.zip

    --- History ---

    2013.05.20: SuperSU v1.30
    2013.02.20: SuperSU v1.05
    2012.12.02: SuperSU v0.98
    2012.10.26: SuperSU v0.96
    29
    I've updated the I9300 download with the ELLC recovery.
    13
    All CF-Auto-Root's have been updated with SuperSU v1.05 today !