[GUIDE][18th Dec][4Noobs] Flashing A FTF File Using Flashtool

Search This thread

Trickster34

New member
Mar 30, 2014
2
0
I tried flashing an ftf file to revert my phone back to stock but it always gets stuck on system.sin I've flashed this ftf before but I've never had this problem until now. Any help? I cant get into my Play so thats why I was trying to flash the stock back on. Also I found out that if I exculde system before flashing it finishes but my phone only gets to the Sony Ericsson splash screen and I cant get further than that because I have no system so I need to get into recovery somehow
31/038/2014 16:38:14 - INFO - <- This level is successfully initialized
31/038/2014 16:38:14 - INFO - Flashtool Version 0.9.14.0 built on 12-02-2014 22:45:00
31/038/2014 16:38:18 - INFO - Device disconnected
31/038/2014 16:38:38 - INFO - Selected Bundle for R800i. FW release : 4.0.2.A.0.58. Customization : Enhanced
31/038/2014 16:38:38 - INFO - Preparing files for flashing
31/038/2014 16:38:39 - INFO - Please connect your device into flashmode.
31/039/2014 16:39:48 - INFO - Device connected in flash mode
31/039/2014 16:39:49 - INFO - Opening device for R/W
31/039/2014 16:39:49 - INFO - Reading device information
31/039/2014 16:39:49 - INFO - Phone ready for flashmode operations.
31/039/2014 16:39:49 - INFO - Current device : Unknown: Jul 13 2012/20:39:55 - CB5A1DHH0N - Unknown: Jul 13 2012/20:39:55 - 1245-8821_4.1.H.0.4 - Unknown: Jul 13 2012/20:39:55
31/039/2014 16:39:49 - INFO - Start Flashing
31/039/2014 16:39:49 - INFO - Device loader has not been identified. Using the one from the bundle
31/039/2014 16:39:49 - INFO - Processing loader.sin
31/039/2014 16:39:49 - INFO - Checking header
31/039/2014 16:39:49 - INFO - Flashing data
31/039/2014 16:39:52 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Boot version : r9A021 / Bootloader status : ROOTED
31/039/2014 16:39:52 - INFO - Processing kernel.sin
31/039/2014 16:39:52 - INFO - Checking header
31/039/2014 16:39:52 - INFO - Flashing data
31/039/2014 16:39:54 - INFO - Processing fota1.sin
31/039/2014 16:39:54 - INFO - Checking header
31/039/2014 16:39:54 - INFO - Flashing data
31/039/2014 16:39:55 - INFO - Processing fota0.sin
31/039/2014 16:39:55 - INFO - Checking header
31/039/2014 16:39:55 - INFO - Flashing data
31/039/2014 16:39:55 - INFO - Processing adsp.sin
31/039/2014 16:39:55 - INFO - Checking header
31/039/2014 16:39:55 - INFO - Flashing data
31/039/2014 16:39:58 - INFO - Processing amss_fs.sin
31/039/2014 16:39:58 - INFO - Checking header
31/039/2014 16:39:58 - INFO - Flashing data
31/039/2014 16:39:58 - INFO - Processing amss.sin
31/039/2014 16:39:58 - INFO - Checking header
31/039/2014 16:39:58 - INFO - Flashing data
31/040/2014 16:40:08 - INFO - Processing cache.sin
31/040/2014 16:40:08 - INFO - Checking header
31/040/2014 16:40:08 - INFO - Flashing data
31/040/2014 16:40:08 - INFO - Processing system.sin
31/040/2014 16:40:08 - INFO - Checking header
31/040/2014 16:40:08 - INFO - Flashing data
 
Last edited:

fma965

Senior Member
Nov 20, 2011
3,731
1,658
cyanlabs.net
I tried flashing an ftf file to revert my phone back to stock but it always gets stuck on system.sin I've flashed this ftf before but I've never had this problem until now. Any help? I cant get into my Play so thats why I was trying to flash the stock back on. Also I found out that if I exculde system before flashing it finishes but my phone only gets to the Sony Ericsson splash screen and I cant get further than that because I have no system so I need to get into recovery somehow
31/038/2014 16:38:14 - INFO - <- This level is successfully initialized
31/038/2014 16:38:14 - INFO - Flashtool Version 0.9.14.0 built on 12-02-2014 22:45:00
31/038/2014 16:38:18 - INFO - Device disconnected
31/038/2014 16:38:38 - INFO - Selected Bundle for R800i. FW release : 4.0.2.A.0.58. Customization : Enhanced
31/038/2014 16:38:38 - INFO - Preparing files for flashing
31/038/2014 16:38:39 - INFO - Please connect your device into flashmode.
31/039/2014 16:39:48 - INFO - Device connected in flash mode
31/039/2014 16:39:49 - INFO - Opening device for R/W
31/039/2014 16:39:49 - INFO - Reading device information
31/039/2014 16:39:49 - INFO - Phone ready for flashmode operations.
31/039/2014 16:39:49 - INFO - Current device : Unknown: Jul 13 2012/20:39:55 - CB5A1DHH0N - Unknown: Jul 13 2012/20:39:55 - 1245-8821_4.1.H.0.4 - Unknown: Jul 13 2012/20:39:55
31/039/2014 16:39:49 - INFO - Start Flashing
31/039/2014 16:39:49 - INFO - Device loader has not been identified. Using the one from the bundle
31/039/2014 16:39:49 - INFO - Processing loader.sin
31/039/2014 16:39:49 - INFO - Checking header
31/039/2014 16:39:49 - INFO - Flashing data
31/039/2014 16:39:52 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Boot version : r9A021 / Bootloader status : ROOTED
31/039/2014 16:39:52 - INFO - Processing kernel.sin
31/039/2014 16:39:52 - INFO - Checking header
31/039/2014 16:39:52 - INFO - Flashing data
31/039/2014 16:39:54 - INFO - Processing fota1.sin
31/039/2014 16:39:54 - INFO - Checking header
31/039/2014 16:39:54 - INFO - Flashing data
31/039/2014 16:39:55 - INFO - Processing fota0.sin
31/039/2014 16:39:55 - INFO - Checking header
31/039/2014 16:39:55 - INFO - Flashing data
31/039/2014 16:39:55 - INFO - Processing adsp.sin
31/039/2014 16:39:55 - INFO - Checking header
31/039/2014 16:39:55 - INFO - Flashing data
31/039/2014 16:39:58 - INFO - Processing amss_fs.sin
31/039/2014 16:39:58 - INFO - Checking header
31/039/2014 16:39:58 - INFO - Flashing data
31/039/2014 16:39:58 - INFO - Processing amss.sin
31/039/2014 16:39:58 - INFO - Checking header
31/039/2014 16:39:58 - INFO - Flashing data
31/040/2014 16:40:08 - INFO - Processing cache.sin
31/040/2014 16:40:08 - INFO - Checking header
31/040/2014 16:40:08 - INFO - Flashing data
31/040/2014 16:40:08 - INFO - Processing system.sin
31/040/2014 16:40:08 - INFO - Checking header
31/040/2014 16:40:08 - INFO - Flashing data
fastboot flash boot KERNEL or fastboot boot RECOVERYIMG
 

m.fauzie

New member
Apr 4, 2014
2
0
where did I go wrong

fastboot flash boot KERNEL or fastboot boot RECOVERYIMG

Hi, im new to root n flashing, not quite sure what im doing, few days ago I unlocked the bootloader of my acro s and I lost the camera, next I root with kingo root, but since then evrytime I try flashing custom rom it failed, I try beanstalk, paranoid, cm10.1 and afew more, either it said status 7 error or status 4 error, I have dual recovery, twrp and cm 6.0.2.7, could u pls tell me what step have I miss, im currently on stock rom b.96,
thank you
 

dhineshsm

New member
Sep 8, 2015
1
0
am getting always the error unable to connect to network

i am getting the error unable to connect to the network.. I have very good internet with good bandwidth.

can you please guide.. if i need to change any settings for it to work.

thanks

Dhinesh
 
Aug 17, 2014
29
1
mumbai
FTF Error

ive tried the flashtool and it keeps saying "processing of loader.sin finished with errors".... i have cm10 installed for 11.2.a.31 firmware of xperia j... and now i want to go back to the xperia stock rom... ive tried flashing with different firmware's of xperia j but the same messages keeps repeating and it aborts the flashing... how do i solve it please help..!!

thanks
 

wareca

Member
Jun 1, 2013
24
2
help plz, i have this error flashing any ftf file "19/023/2015 18:23:33 - ERROR - Processing of loader_unlocked.sin finished with errors.
19/023/2015 18:23:33 - INFO - Ending flash session" i test in windows 10x64,win 8.1 x64, win 7 x86 and x64, all verisions of flash tools, all drivers versions. someone could send me a nanadroid backup of r800i plz
 

zephyricguy

Member
Nov 6, 2011
26
1
Hi guys, i have been trying to unlock bootloader and root my xperia L (C2104) after flashing it with firmware my device does not show sim card (a small cross over the signal bars). Please help me out with it. Step by Step info will be highly appreciated.

Thanks
 

kesuma27

Member
Aug 29, 2013
11
0
At here


---------- Post added at 12:18 PM ---------- Previous post was at 11:41 AM ----------

How to Flash a FTF file with Flashtool!

Requirements

Flashing the FTF
  1. Download and install the Flashtool package and download and extract the R800i_4.0.2.A.0.58_Enhanced.zip.
  2. Next go to where you installed flashtool and then to the drivers folder.
  3. Run the Flashtool-drivers.exe file.
  4. select "your drivers", flashmode and fastboot drivers.
  5. QK5T9.png
  6. Accept all the prompts and once finished load flashtool
    NeyJu.png
  7. Now select flashmode
  8. Now click the "..." button
    Rgjm7.png
  9. browse to the folder where the FTF is and press "open"
  10. Now click the "..." button
    CnsMY.png
  11. Switch your phone off and press and hold the back button while connecting usb lead (Green LED)
  12. It should start flashing and once done will say "Complete", Reboot and your done.

Congratulations you have now successfully flashed a FTF file using flashtool.

[no longer linking tutorials to my site as currently messing around with my site so links may break, to prevent this i will post them here since i found a html to vbcode converter aswell :)]


Hello guys, im very sorry for asking a noobey problems.

I just bought Xperia Play this month for new device (the original but old stock).
And i did flashing with tutor by fma965 , from stock to R800i_4.0.2.A.0.58_ enhanched.

14dpr8k.jpg


And now i just got stuck in sony ericsson Logo.


It will be great if somebody can help me.
sorry for my noob things and thanks before
 

robdam1001

Senior Member
Feb 24, 2007
135
14
link is bad for the flash tool. Would you kindly update it? Thanks.

How to Flash a FTF file with Flashtool!

Requirements

Flashing the FTF
  1. Download and install the Flashtool package and download and extract the R800i_4.0.2.A.0.58_Enhanced.zip.
  2. Next go to where you installed flashtool and then to the drivers folder.
  3. Run the Flashtool-drivers.exe file.
  4. select "your drivers", flashmode and fastboot drivers.
  5. QK5T9.png
  6. Accept all the prompts and once finished load flashtool
    NeyJu.png
  7. Now select flashmode
  8. Now click the "..." button
    Rgjm7.png
  9. browse to the folder where the FTF is and press "open"
  10. Now click the "..." button
    CnsMY.png
  11. Switch your phone off and press and hold the back button while connecting usb lead (Green LED)
  12. It should start flashing and once done will say "Complete", Reboot and your done.

Congratulations you have now successfully flashed a FTF file using flashtool.

[no longer linking tutorials to my site as currently messing around with my site so links may break, to prevent this i will post them here since i found a html to vbcode converter aswell :)]
 

Top Liked Posts

  • There are no posts matching your filters.
  • 43
    How to Flash a FTF file with Flashtool!

    Requirements

    Flashing the FTF
    1. Download and install the Flashtool package and download and extract the R800i_4.0.2.A.0.58_Enhanced.zip.
    2. Next go to where you installed flashtool and then to the drivers folder.
    3. Run the Flashtool-drivers.exe file.
    4. select "your drivers", flashmode and fastboot drivers.
    5. QK5T9.png
    6. Accept all the prompts and once finished load flashtool
      NeyJu.png
    7. Now select flashmode
    8. Now click the "..." button
      Rgjm7.png
    9. browse to the folder where the FTF is and press "open"
    10. Now click the "..." button
      CnsMY.png
    11. Switch your phone off and press and hold the back button while connecting usb lead (Green LED)
    12. It should start flashing and once done will say "Complete", Reboot and your done.

    Congratulations you have now successfully flashed a FTF file using flashtool.

    [no longer linking tutorials to my site as currently messing around with my site so links may break, to prevent this i will post them here since i found a html to vbcode converter aswell :)]
    7
    If any one has used this guide can you confirm it is correct :) Thanks.
    5
    :)Yes I totally agree with abdel12345 your guides are well laid out and not too complicated some times people over explain things and this can complicate things especially if your new to android.That's why I have put a link to your tutorials in my signature because unfortunately some people forget to use the search feature lol;)
    Thanks Man as you can see i recently changed my signature to have a gif showing all my tutorials in a stand out way :)
    2
    I didn't use the guide but I've flashed an ft before and can confirm those are the correct steps

    Sent from my r800x using Tapatalk 2

    Great its been a long time and wanted to make sure it was correct as not had much response unlike my other tutorials.
    2
    I think its because the other guides are things people use more and don't know how to do while flashing ftf is easier to figure out by yourself. But I've used a couple of you're other guides and they helped a lot. :D:thumbup:

    Sent from my r800x using tapatalk 2
    rom: extremeicsv3
    kernel: turbo v3.1

    :)Yes I totally agree with abdel12345 your guides are well laid out and not too complicated some times people over explain things and this can complicate things especially if your new to android.That's why I have put a link to your tutorials in my signature because unfortunately some people forget to use the search feature lol;)