[GUIDE]A500/501/G100W-Installing ICS V8 UNL-BL & CWM Or back to HC BL(24-6-2012)

Search This thread

dibb_nz

Senior Member
Sep 23, 2010
1,635
466
Shake City
Were do I find/look for the boot.p file? Also once I see weather or not it is there, what do I do next to install a recovery?

how did u root?

EDIT: sorry pushed submit post instead of preview!!!


boot.p is located at /system - if its not there, then run thru the bootloader flash again to install your recovery - if you still have troubs, use bundle 17 (cwm 1.7.3) once you're up and running you can flash twrp via cwm
 
Last edited:

bufa

Senior Member
May 11, 2008
249
31
La Plata
alerossi.com.ar
hello, I'm getting this trying to install bootloader from V8

Code:
Flashing bootloader: bootloader_v8.bin ...

Nvflash started
[resume mode]
Formatting partition 4 please wait.. done!
failed executing command 25 NvError 0x120002
command failure: sync failed (bad data)
bootloader status: Bct Write Failed (code: 22) message: nverror:0x42004 (0x42004
) flags: 0

Nvflash started
[resume mode]
failed executing command 14 NvError 0x120002
command failure: partition download failed (bad command)
bootloader status: unknown operation (code: 1) message:  flags: 0

Flashing recovery:   PubRecovery_v0.2.img

Nvflash started
[resume mode]
Formatting partition 6 please wait.. Nvflash started
[resume mode]

And it hangs there. What sould I do?

The tablet got bootloop after upgrading "alone" to ICS.

Thanks a lot!
 

jhr5474

Senior Member
Sep 20, 2010
1,427
468
Holley, Oregon
I tried this thread last night on my a501, got my sbk fine, but once I go to use the v8 tool it tells me nvflash not a recognized command, I am on windows 8 running hc 3.2.1 that tells your tab its a500 the stock rom. I also attempted it on my windows 7 machine same issue any help is appreciated.

Sent from my LG-LS980 using XDA Free mobile app
 

rcraig617

Senior Member
May 3, 2012
122
5
I'm on skrilax bootloader v8 is there a way i can go back to a stock rom it doesn't matter what stock rom. I already unrooted my tab through superuser if that matters.
 

bovirus

Senior Member
Oct 7, 2007
2,154
790
I want to update the bootloader v9

http://forum.xda-developers.com/showthread.php?t=1619913

Using APX_v0.4A-flashTool-500Manager1.0.2_(1)

I downloaded teh bootloader V9 archive. It contains

bootloader_apx.bin
bootloader_v9.bin
bootloader_v9.blob

No one is .apx (as explaiend in first post).

Which fiel have tos elect with APX_v0.4A-flashTool-500Manager and with which steps?
 

samikrc

Member
Apr 8, 2011
5
0
APX Driver Issue

Hi,
I am trying A500APXFlash.exe with A500_A501_ICS_V9_bootloader.a500apx, and facing an weird problem. When the device seemingly enters the APX mode, the laptop doesn't find the driver. I am using an Win 10 x64 laptop (ASUS), and I have installed the ACER driver package. The device list shows "APX Device - no driver" at this point. I tried uninstalling and reinstalling the driver but not much help. Any pointers?
Regards.
 

IbtihajT

Member
Jul 25, 2014
7
0
Stuck

Hey brother thanks for the support i just am having a bit of problem. My tab has entered the apx mode and the command window on my pc is Stated as "Nvflash Started [resume mode]" and the flash tool is saying Flashing Bootloader (EBT) stage two-uploading image...
Now its been like 2 hours like this and it is not going further.
Please i need your help dude.
Thanks
 

andyvb01

New member
Mar 5, 2016
2
0
i am getting the dead androi some help please


Option 2 , keep reading.... don't be a chicken , just do it !!.​

Automated flashing tool


Manual flashing

You Are on the ICS Unlocked bootloader and want to install a different CWM the easy way !

Q&A:

dead android help please
 

alainalemany

Senior Member
Jun 14, 2008
148
8
40
La Habana
alemany.io
Since (and I have no idea why) nowdays u can't download from dev-host (keeps loading until timeout), and there's no mirror for V8-pubA50._public_recovery.a500apx, V8-Thor_1.7.3_recovery.a500apx, or V8-TWRP_2.1.3_ICS_recovery.a500apx... I would appreciate if someone with those archives can upload them to any mirror. It would be life saver right now.

Thanks in advance.
 

turnert

Senior Member
May 24, 2015
392
113
Las Vegas
Google Pixel 6 Pro
Since (and I have no idea why) nowdays u can't download from dev-host (keeps loading until timeout), and there's no mirror for V8-pubA50._public_recovery.a500apx, V8-Thor_1.7.3_recovery.a500apx, or V8-TWRP_2.1.3_ICS_recovery.a500apx... I would appreciate if someone with those archives can upload them to any mirror. It would be life saver right now.

Thanks in advance.

I will dig around on my computer today I most likely have it on there. If I find it I will post it.
 

crazypwn

Member
Apr 25, 2015
26
3
36
Moto G Stylus 5G
OK so I've been able to find every other file I need to do this but I can not find any active link( not riddled with ads) to download the a500manager.exe or the APX_flashtool. Can anyone post a recent link to those 2 files pls?
 

turnert

Senior Member
May 24, 2015
392
113
Las Vegas
Google Pixel 6 Pro
  • Like
Reactions: crazypwn

crazypwn

Member
Apr 25, 2015
26
3
36
Moto G Stylus 5G
OK so my a500 said verified once I flashed the bl but when I restart like it asks the bl menu and recovery show acer in yellow and ask to restart device. In red. Hard for me to do Apx mode manually couse my power button is snapped off the motherboard but was wondering if that's all it is? Could I have flashed the wrong bl file? If so I'll try something to get in Apx manually to flash the other file that I have. So far though I still can't get a recovery working but I'm sure soon as the bl flash's correctly it will work out.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 152
    First thanks to Skrilax_CZ (unlocked bootloader) , jm77 (for his guide), strra(tools and bat file) Zatta for modded script , blackthund3r for APX flashing tool & gersma (for otatool)

    You need to understand that this can brick your tablet and going back to HC roms is not possible or you need to reflash your tablet again with this
    WHAT IS THIS V8UNLOCKED multi ICS BOOTLOADER

    You can install the ICS bootloader using cwm if you are on V4 or V5 , see in this link for the updates and cwm packages.

    PLEASE FOLLOW TO THE LETTER AND READ TWICE , don't be drunk , don't watch sports (we are men and can only do one thing at a time), don't take advice from your wife , girlfriend or whatever you need to feel loved , this is not like shopping for a bike or car!!! This is probably the most boring thing you are going to do in your life!
    Option 1 use Afterota for A500/G100W IF YOU ARE ON OTA ICS and follow this thread
    Option 2 , keep reading.... don't be a chicken , just do it !!.​

    -STEP 1=Install the USB drivers from Acer on PC ( Acer's). NOTE: If you got stuck or can't get into APX mode please make sure you reinstall the usb drivers first and you got the latest ones.
    STEP2=First before you do anything else make sure you got your "cpuid". How see Q&A , bottom of this thread.
    Or you use the Blackthun3er V0.4 APX flasher (see in the section "automated flashing tool") , this tool will give and fill in your SBK automaticly if you used it before.

    -STEP 3=Now go
    to get your SBK or use this tool you find here
    -STEP 4=Make sure you got a ICS rom on your tablet to flash after you installed the ICS bootloader the first time .
    -FLEXREAPER

    -LIGHTSPEED


    -TABOONAY
    (with this make sure you flash the Kernel for ICS bootloader after you installed the rom , you find it in the Taboonay thread)

    -ezterry ICS 1.031.00stock- full root with busybox, and more tweaks


    -
    A501 Alexandra IV ICS ver 4.0.3. (for A501 users)

    -FULL-STOCK-FULL-ROOT


    -Or you can flash the full leaked version of 1.031.00 405MB but then you need to get root so you can delete "recovery-from-boot.p" from /system before you flash the unlocked booloader and custom recovery.
    Good time to check your SBK number , see Q&A section
    STEP 5= Going into APX mode see Q&A or use A500 manager
    STEP 6 INSTALLING ICS BOOTLOADER
    Automated flashing tool

    USING blackthund3r ATX flash tool , It makes it all a little easier !

    You need help on this ! Here is a walk thru!

    -download the APX-FLASH-Tool & Manager

    -Download one of the V8 unlocked bootloader apx flash packages combined with a recovery of your choise
    .

    V8-pubA50._public_recovery.a500apx
    V8-Thor_1.7.3_recovery.a500apx
    V8-TWRP_2.1.3_ICS_recovery.a500apx
    - Firts you do the Steps 1-2-3- 4 of the main guide !!

    -1-Reboot your tablet and make sure on your tablet: "Settings" -> "Applications" -> "Development" -> "USB debugging" switch on.

    -2-Now start the "A500APXFlash.exe" , the tool will start .

    -3-When it askes for your SBK you need to type it in , the v0.4 APX flash tool will give your SBK automaticly !!

    -4-Now you select "Use an A500 APX Flash Tool Package.(.a500apx)

    -5-Select the package that you want,(you click on the right arrow to continue)

    -6-Now you can select "Manual Method" or "Automatic Method". (I always pick Automatic)

    -7-Click on "Enter APX Mode" (now it will do his thing)

    -8-When it says "Done! press to run again" (even if it says on the bottom of the app "no apx mode devices are connected") you click on the right arrow to continue.

    -It will ask if you are ready (click yes if you are)

    -Let the app do his thing and wait !!!!!!
    Until it says "Done! Press and hold power to switch off then power back on!"

    [FONT=&quot]Optional A500MANAGER
    What does it do : [/FONT]

    · [FONT=&quot]One-click APX Mode entry[/FONT]
    · [FONT=&quot]One-click Recovery Mode entry[/FONT]
    · [FONT=&quot]One-click fastboot entry for patched bootloaders[/FONT]
    · [FONT=&quot]Instant logcat viewer[/FONT]
    · [FONT=&quot]Instant dmesg Viewer[/FONT]
    · [FONT=&quot]Function which dumps the dmesg to a text file on the desktop[/FONT]
    · [FONT=&quot]Serial number extraction to make SBK calculation exponentially easier[/FONT]
    · [FONT=&quot]Links to ICS Root, A500 APX Flash Tool and two download links (Acer and my mirror) for USB Drivers[/FONT]
    · [FONT=&quot]Shows what mode the tablet is in at the bottom[/FONT]

    BIG THANKS TO blackthund3r

    Manual flashing

    Open cmd (command prompt) on the extracted folder "V8-UNL-ICS-HC-bootloader-MULTI-cwm".
    (Tip how to open cmd on any folder you want
    Windows Vista/7 : Simply hold down the Shift key and right-click a folder. The context menu will contain an entry, ‘Open command window here.” )
    Or you if you extracted the folder in c:\nvflash you type in cmd "cd c:\nvflash"

    -FOR A500/A501/G100W:

    For the ICS bootloader and multi custom recovery's you type in cmd : v8 (enter) (or you open the folder and click on this "v8.bat")
    Now you get 4 choises of V8 with a different recovery , select one.

    -TWRP recovery
    -PubA500 recovery
    -Thor1.7
    -Thor1.7.3

    If for any reason you want to go back to HC bootloader:
    For the HC bootloader and recovery you type in cmd : a500-hc (enter) if you have a A500 or a G100W (or open the folder and click on this "a500-hc.bat")
    For the HC bootloader and recovery you type in cmd : a501-hc (enter) if you have a A501 (or open the folder and click on this "a501-hc.bat")


    -Your SBK is asked : you put that in and press enter. (right click on cmd titlebar gives option to copy/paste it)


    -The process should begin. If you recieve a USB write error, your SBK is incorrect. (Lot of stuff going on in the cmd and then it stops)

    -Windows command prompt will read "Press any key when your A500/501/G100W is in APX mode". Do not continue until the tablet is in "Acer Iconia A500/501 APX Mode" (look at the screen of your tablet).

    -Once the tablet reads "Acer Iconia A500/501 APX Mode", you are in bootloader mode. You can proceed and it will begin formatting the various partitions and installing the recovery.

    -Once the process completes, it should say PASS (on the screen of your tablet) in big letters and in small red letters "Reboot the device" (Top left corner still says "Acer Iconia A500/501 APX Mode" that is normal) . You can then power off the tablet and power it back on again.

    If you get the message = secure boot : image LNX checksum fail ! , No problem just reboot the tablet.

    -Make sure your tablet boots.
    Power the tablet down and attempt to launch CWM via Power+VolDown.
    You Are on the ICS Unlocked bootloader and want to install a different CWM the easy way !
    Put it on your tablet and install with CWM

    -Ezterry's BareBones Recovery :CWM-install-A500PubRecovery_v0.2.zip

    -TWRP 2.1.3-ICS (touch recovery) :CWM-install-TWRP-2.1.3-ICS.zip
    (modded by civato for ICS only , no more messed up screen on booting into recovery)

    -Thor 1.7 touch recovery (repacked to work on ICS) :CWM-install-recovery_thor1.7.zip

    -Thor 1.7.2 Multi bootloader (HC , ICS) touch recovery :CWM-install-recovery_thor1.7.2.zip
    (But for some this doesn't work)

    Q&A:
    How to get my CPUID ?

    On HC Rom or HC bootloader (3.01) or you got a old nandroid backup do this to get your cpuid
    -You can find your "cpuid" in one of your "nandroidbackups" that you made with cwm (look on your external SD/clockworkmod/backup=uid.txt ). It's the uid text you are looking for.
    -Or when you connect your tablet and type in adb devices in cmd you get your cpuid
    -Or usbdeview see more info here , thanks to dibb_nz


    ON ICS ROM or ICS booloader (0.3.11 or 0.3.12) do this to get your cpuid:
    Or you Install and launch Android terminal app on tablet. Run the following command: dmesg>/mnt/external_sd/dmesg.txt
    Open up dmesg.txt (will be stored on your external SD) and look for androidboot.serialno. That is your CPUID.

    Or try the following to get your cpuid (thanks to japinder)
    -Reboot the Tab & just use the command 'dmesg | grep androidboot.serialno' (without quotes).
    It displays the cpuid there & then. No extra lines, no need to save to file & then search. If the Tab hasn't been rebooted in a while, then the line containing 'androidboot.serialno' entry is lost/overwritten, so it won't even be there in the 'dmesg' output. Running the above command after a fresh reboot will always yield the result in an easier way.

    OR SEE GUIDE HERE , WHERE IS MY CPUID AT



    Checking your SBK

    Go into APK mode (step 5 or use A500 manager) and open cmd on SBK-test (download this first) folder and type in something like this:
    nvflash --bl bootloader.img --sbk (your SBK) --sync]

    In my case = nvflash --bl bootloader.img --sbk 0x3DA61E00 0x7899AA01 0x97D04E03 0x1E092103 --sync (enter)

    If your SBK is good you get your system information and you will see your chip uid with some more stuff.

    If your SBK is wrong, you'll get this:
    rcm version 0X4
    Command send failed (usb write failed)

    STOP HERE AND DON'T PROCEED if your SBK is not correct!!!!!!!!!

    (Tip how to open cmd on any folder you want
    Windows Vista/7 : Simply hold down the Shift key and right-click a folder. The context menu will contain an entry, ‘Open command window here.” )


    Going into APX MODE manualy

    You enter APX mode by holding down the Reset button(with paper clip). Do not release it. Hold down power for 3 secs and then release it. After another second, release the reset button.
    Your Windows PC should then detect your device and install the APX driver. You should then have an APX USB device installed. If you do not have an APX USB device listed in your system tray, you cannot proceed.
    The screen of your tablet is black.


    Linux users see here
    10
    If you provide me the write up I will add it , I know nothing of linux so it is up to you.
    Finally had some time to write up on the Linux guide. It's not so much of a guide, but more pointers to the correct working linux nvflash binary and some common sense.

    1. There is no need for special APX drivers! Everything works like it is.
    2. These additions to /etc/udev/rules.d/51-android.rules might help:
    Code:
    SUBSYSTEM=="usb", ATTR{idVendor}=="0502",ATTR{idProduct}=="3325",  MODE="0666", SYMLINK+="a500"
    SUBSYSTEM=="usb", ATTR{idVendor}=="0955",ATTR{idProduct}=="7820",  MODE="0666"
    You need to restart udev if you added this.
    3. The working nvflash tool can be downloaded from nvidia via this link:
    http://developer.download.nvidia.com/assets/mobile/files/tegra-linux-12.alpha.1.0.tar.gz
    4. If for whatever reason the above link becomes outdated, the official Linux 4 Tegra page, pointing to the latest Linux 4 Tegra tools is here:
    http://developer.nvidia.com/tegra-250-tango-development-kits
    5. Drop the nvflash binary beside the windows nvflash.exe (they won't bite) and create your own a500.sh file something like this (inspect the original a500.bat for the actual bin and image file names) depending on your needs and wishes:
    Code:
    #!/bin/sh
    ./nvflash --bct bct.bct --setbct --bl bootloader.bin --configfile flash.cfg --odmdata 0x300d8011 --sbk 0xXXXXX 0xXXXXX 0xXXXXX 0xXXXXXX --sync
    ./nvflash -r --format_partition 4
    ./nvflash -r --download 4 ics_boot_unlk_V3.bin
    ./nvflash -r --format_partition 6
    ./nvflash -r --download 6 recovery_thor17_403.img
    ./nvflash -r --go

    In APX mode, the screen is black but you should see a new usb device with the following id's with lsusb:
    Code:
    $ lsusb
    ...
    Bus 002 Device 005: ID 0955:7820 NVidia Corp.

    Hope this helps.
    4
    Remember this line of the guide
    You can also flash the full leaked version of 1.031.00 but then you need to get root so you can delete "recovery-from-boot.p" from /system before you flash the unlocked booloader and custom recovery.

    If you flashed the full leak version you need to delete
    "recovery-from-boot.p" from /system if you don't do that recovery will be replaced everytime you reboot your tablet.
    4
    Will the cpuid ever change? I only found it on a really old Nandroid. It was blank in a more current one

    Sent from my A500 using XDA
    Always test your SBK to be sure , see guide.
    4
    Was what I was thinking , I used the uid from my first nandroid backup when it was still a PackardBell HC 3.0.1 rom from the G100W.
    But still want them to test there SBK before they complain it got stuck.