[GUIDE] Bootloader Unlock On RUI 2.0 based on Android 11(R)

[debdeep98]

(26/09/21) Note.- This tool is primarily for realme 6Pro on RUI2.0, and is expected to work on it without issues. However deep-test apks sometimes work for other devices too... If it's working on yours then good, if not then there's nothing that can be done except find the correct one for your device [c.realme.com]. These tools have in-built checks and I have no idea which parameters it considers, if I had to guess I'd say a certain fw version requirement and the model of chipset. So if you have any device other than RMX2061/3 and this tool didn't work, I'm sorry.

If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.

Your warranty may now be void.​

Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*

Prerequisites:
ADB and Fastboot.
Deeptesting APK for A11.

Steps for Unlock:-

1. Backup your data.​
2. Install deeptesting.apk.​
3. Open the app and click start applying.​
4. Wait for application to be summited and processed.​
5. Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.​
6. Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.​
7. Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.​
8. Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).​
9. Use volume and power button to select unlock the bootloader.​
10. Phone will format and reboot.

*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*

 

[bppjenil]

Thank you

 

[dks4deepak]

key combinations for fastboot mode not working

 

[debdeep98]

key combinations for fastboot mode not working

Use adb reboot-bootloader.

 

[dks4deepak]

Use adb reboot-bootloader.

when stuck at boot /recovery destroyed screen. there is no adb.

 

[debdeep98]

when stuck at boot /recovery destroyed screen. there is no adb.

Locked on custom partitions?
Motherboard change is the only option now.

 

[freder_]

Good morning,

i tried this deep testing version on my realme 8 5g (android 11 UI 2.0),
but it doesn't work and the message comes out

"Failed to submit application. - This phone model does not support deep testing."


what can I do?

 

[debdeep98]

Good morning,

i tried this deep testing version on my realme 8 5g (android 11 UI 2.0),
but it doesn't work and the message comes out

"Failed to submit application. - This phone model does not support deep testing."


what can I do?

Wait for realme to allow bl unlocks on 8 5G.

 

[DeSmanAryPotter]

If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.

Your warranty may now be void.​

Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*

Prerequisites:
ABD and Fastboot.
Deeptesting APK for A11.

Steps for Unlock:-

1. Backup your data.​
2. Install deeptesting.apk.​
3. Open the app and click start applying.​
4. Wait for application to be summited and processed.​
5. Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.​
6. Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.​
7. Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.​
8. Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).​
9. Use volume and power button to select unlock the bootloader.​
10. Phone will format and reboot.

*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*

Deep testing apk you shared doesnt work on realmi 7i UI.2.0 Android 11

 

[debdeep98]

Deep testing apk you shared doesnt work on realmi 7i UI.2.0 Android 11

Yeah it's for the 6Pro. When realme allows unlocks on 7i it'll work.

 

[Facux3]

If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.

Your warranty may now be void.​

Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*

Prerequisites:
ABD and Fastboot.
Deeptesting APK for A11.

Steps for Unlock:-

1. Backup your data.​
2. Install deeptesting.apk.​
3. Open the app and click start applying.​
4. Wait for application to be summited and processed.​
5. Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.​
6. Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.​
7. Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.​
8. Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).​
9. Use volume and power button to select unlock the bootloader.​
10. Phone will format and reboot.

*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*

I can not install the app, how can I do?

 

[debdeep98]

I can not install the app, how can I do?

Device and Android version.

 

[p.pc]

nice work

 

[p.pc]

the adb folder is not opening , what to do ? im using windows 10

 

[debdeep98]

What do you mean? Access denied? Try downloading platform tools again.

the adb folder is not opening , what to do ? im using windows 10

 

[lfnisme]

How about Realme X7 Pro?

 

[debdeep98]

How about Realme X7 Pro?

You can try. See if it works.

 

[pravinraj252]

App not installed on realme X2 Pro

 

[Nayeemh]

If you've updated to realme UI 2.0 and want to unlock, this will allow you to do it.

Your warranty may now be void.​

Warning.-
*After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you Proceed.*
*After unlocking Widevine L1 will be replaced by Widevine L3, which as of now can't be fixed/patched. If you already had L3 on locked bootloader... My condolences.*
*Safety-Net fails so some banking apps may not work and Play Store certification will be gone*

Prerequisites:
ABD and Fastboot.
Deeptesting APK for A11.

Steps for Unlock:-

1. Backup your data.​
2. Install deeptesting.apk.​
3. Open the app and click start applying.​
4. Wait for application to be summited and processed.​
5. Minimize the app and head over to developer settings and turn on OEM Unlock and USB Debugging.​
6. Open deeptesting again and click on start in-depth test, the phone will reboot to bootloader. OR manually do that by pressing volume - and power in switched off state.​
7. Connect phone to PC. Open ADB folder and use right click+shift and from the there click on open powershell/cmd here or type cmd in address bar.​
8. Type fastboot flashing unlock(cmd) or ./fastboot flashing unlock(powershell).​
9. Use volume and power button to select unlock the bootloader.​
10. Phone will format and reboot.

*If you had unlocked bootloader and updated from RUI 1.0 --> 2.0, you don't need to repeat this.*
*If you know how to unlock or have unlocked before, Congratulations! Also this guide isn't for you, but you may find the APK useful.*
*For people who are unlocking their device for the first time, make sure when re-locking, all partitions are stock, or you'll have a very bad day... or a week/month if there aren't any service center nearby.*

My device is realme x2 (Chinese rom). when I tried to install the deep testing app it says an app with same signature has already been installed . But I did not install that app never before. How can I do this?

 

[Nayeemh]

My device is realme x2 (Chinese rom). when I tried to install the deep testing app it says an app with same signature has already been installed . But I did not install that app never before. How can I do this?