[Guide]Build.prop Wiki

[Chris_84]

yup... i use them... not sure if everything works.. u can try them

Sent from my GT-I9300 using xda premium

Again thank you! Will try it and put them to the op with credits to you if its ok.

Throwing out of the window from my flying Ferrari killer S3 driven by a proud omega team member

 

[kp.nikhil]

Again thank you! Will try it and put them to the op with credits to you if its ok.

Throwing out of the window from my flying Ferrari killer S3 driven by a proud omega team member

actually give credits to Google... i found them way long back when i was using my old phone HTC wildfire s... lots of Tweaks are needed to make low end devices fly... s3 flies atm

Sent from my GT-I9300 using xda premium

 

[vegeta1]

actually give credits to Google... i found them way long back when i was using my old phone HTC wildfire s... lots of Tweaks are needed to make low end devices fly... s3 flies atm

Sent from my GT-I9300 using xda premium

right said nikhil and thanks for your input too my friend


Now its time for some dark siders

 

[kp.nikhil]

right said nikhil and thanks for your input too my friend


Now its time for some dark siders

welcome mate

another 1 ( oops din c in op.. its der already)
Enable HSUPA Network Mode
ro.ril.hsxpa=3

Sent from my GT-I9300 using xda premium

 

[capricornian]

Hey thanks for the awesome thread... Threads like these help so many unnecessary queries across xda...
So mate I want to change dpi settings to 240 from 320.. Changing the LCD line from 320 to 240 would suffice? Any precautions to be taken? I'm going to do it thru cm file manager.. After Mounting write perms... Thanks in advance!!

 

[zoot1]

Hey thanks for the awesome thread... Thread like these help so many unnecessary queries across xda...
So mate I want to change dpiv settings to 240 from 320.. Changing the LCD line from 320 to 240 would suffice? Any precautions to be taken? OK going to do it thru cm file manager.. After Mounting write perms... Thanks in advance!!

yup..changing the LCD density value should be enough..just keep a backup of the build.prop file..no need to change permissions ...

 

[Chris_84]

yup..changing the LCD density value should be enough..just keep a backup of the build.prop file..no need to change permissions ...

Couldn't say it better! Edit: but be careful. Some apps may crash.

Throwing out of the window from my flying Ferrari killer S3 driven by a proud omega team member

 

[thekoRngear]

yup... i use them... not sure if everything works.. u can try them

Sent from my GT-I9300 using xda premium

even if those are not present in the buil.prop I can add using text editor and test, right? Sorry for noob question.

 

[Chris_84]

even if those are not present in the buil.prop I can add using text editor and test, right? Sorry for noob question.

Yes you're right. But backup first in case something went wrong.

Throwing out of the window from my flying Ferrari killer S3 driven by a proud omega team member

 

[prboy1969]

Nice write Up. Thank you

 

[Chris_84]

Nice write Up. Thank you

Thanks mate!

 

[Ubimo]

Chris_84, can you please upload your current/favourite build.prop here so everyone can test it?

 

[Chris_84]

Chris_84, can you please upload your current/favourite build.prop here so everyone can test it?

Of course I can. Will do it asap because I'm pretty busy today.

 

[Chris_84]

Chris_84, can you please upload your current/favourite build.prop here so everyone can test it?

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JZO54K
ro.build.display.id=Omega v36 - XXELLA
ro.build.version.incremental=I9300XXELLA
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Sat Dec 22 17:07:58 KST 2012
ro.build.date.utc=1356163678
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-111
ro.build.tags=release-keys
ro.product.model=GT-I9300
ro.product.brand=samsung
ro.product.name=m0xx
ro.product.device=m0
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=m0
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=m0xx-user 4.1.2 JZO54K I9300XXELLA release-keys
ro.build.fingerprint=samsung/m0xx/m0:4.1.2/JZO54K/I9300XXELLA:user/release-keys
ro.build.characteristics=default
# Samsung Specific Properties
ro.build.PDA=I9300XXELLA
ro.build.hidden_ver=I9300XXELLA
ro.build.changelist=742798
# end build properties
#
# system.prop for smdk4x12
#

rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=320
ro.lcd_min_brightness=20

ro.kernel.qemu=0

ro.tvout.enable=true

persist.sys.storage_preload=1

net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/

# Multimedia property for Smart View
media.enable-commonsource=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
debug.hwui.render_dirty_regions=false
ro.sf.lcd_density=320
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.hdcp2.rx=tz
ro.secwvk=220
ro.sec.fle.encryption=true
ro.config.ringtone=S_Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.adb.qemud=1
ro.com.google.apphider=off
ro.com.google.gmsversion=4.1_r3
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

debug.sf.hw=1
video.accelerate.hw=1
debug.performance.tuning=1
ro.config.nocheckin=1
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=15
ro.ril.disable.power.collapse=1
mot.proximity.delay=15
pm.sleep_mode=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1

ro.config.hw_quickpoweron=true
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1

ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=65
ro.media.capture.flashIntensity=70


sys.keep_app_1=com.android.contacts
sys.keep_app_2=com.android.phone

 

[Ubimo]

Thanks for your build.prop. I'm usinig it slighly modified.

sys.keep_app_1=com.android.contacts
sys.keep_app_2=com.android.phone

These two entries are new to me but I understand what they do. How do I do this with the messages? By just adding sys.keep_app_3=com.android.messages?

Or are the messages included with sys.keep_app_1=com.android.contacts

 

[Chris_84]

Thanks for your build.prop. I'm usinig it slighly modified.



These two entries are new to me but I understand what they do. How do I do this with the messages? By just adding sys.keep_app_3=com.android.messages?

Or are the messages included with sys.keep_app_1=com.android.contacts

They should keep the phone and contact app in ram. But they still can be killed if you use something like super charger or a app use lot of ram.

If you want to keep the message app the line should look like.

sys.keep_app_3=com.android.mms

After the = symbol you got to enter the correct app name.

 

[kp.nikhil]

BRAVIA Engine 2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1

Sent from my GT-I9300 using xda premium

 

[Chris_84]

BRAVIA Engine 2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1

Sent from my GT-I9300 using xda premium

Thanks mate for sharing. Just one question. Got bravia engine be installed if you add this to your build prop?

 

[kp.nikhil]

replace with new1

Sent from my GT-I9300 using xda premium

 

[Chris_84]

replace with new1

Sent from my GT-I9300 using xda premium

Wow thank you mate!