[GUIDE] Convert any Moto G into a GPE with root and custom recovery
- Thread starter thelegendofzeth
- Start date
Not working
i put in the command line flash partition gpt.bin but it says error cannot open file gpt.bin i tried skipping the first two steps but the logo wont flash because of different partitions
i put in the command line flash partition gpt.bin but it says error cannot open file gpt.bin i tried skipping the first two steps but the logo wont flash because of different partitions
This has probably been asked already but just to be sure...
I was on updated bootloader and gpt so this guide gave me an error in those 2... Then it booted just fine and i updated via ota to 4.4.4... This should update gpt and motoboot to the correct, updated gpe 4.4.4 ones right? After updating i did a factory reset just to be sure, everything appears to be working normally
I was on updated bootloader and gpt so this guide gave me an error in those 2... Then it booted just fine and i updated via ota to 4.4.4... This should update gpt and motoboot to the correct, updated gpe 4.4.4 ones right? After updating i did a factory reset just to be sure, everything appears to be working normally
Just curious, just picked up an ATT MOTO G LTE, XT1045 I believe... is it possible to convert to gPE?
Last edited:
It should not be possible since GPE is a 3g device while you have a LTE device.
I converted my XT1033 to a gpe device successfully.
But I wanna turn it back to the normal one. Which firmware should I download?
But I wanna turn it back to the normal one. Which firmware should I download?
After ran all the commands, did your device booted up with the Signal? Mine didnt.. Did you flash any Radio to get the Signal? which radio you flashed..?
Recovery links not working Will you please post mirror Or just tell me any other Moto G recovery working on it or not (cwm philz touch)
Has anyone tried the reverting bavk process?? Does it work??
---------- Post added 29th November 2014 at 12:03 AM ---------- Previous post was 28th November 2014 at 11:57 PM ----------
Your phone recovered from the radio related problems?
---------- Post added 29th November 2014 at 12:03 AM ---------- Previous post was 28th November 2014 at 11:57 PM ----------
Hey,
Your phone recovered from the radio related problems?
yes.. I flashed the nhol and fsg from retail GB rom and got the signal
I tried flashing the GB stock ROM, and I also flashed the 4.4.4 Stock ROM but I was getting only one signal. Even after getting one signal, there was no audio in the calls.
Finally I downloaded the 4.4.2 stock firmware from the post: http://forum.xda-developers.com/showthread.php?p=51512549#post51512549
Then I got back the signal for both my sim cards, and everything is working fine.. I was able to flash the CM11 or any other ROM again.
Finally I downloaded the 4.4.2 stock firmware from the post: http://forum.xda-developers.com/showthread.php?p=51512549#post51512549
Then I got back the signal for both my sim cards, and everything is working fine.. I was able to flash the CM11 or any other ROM again.
Don't do it! I converted my XT1032 to a GPe, first i did the 4.4.4 OTA and after that it showed me the 5.0.1 OTA.
After downloading and installing the Lollipop OTA my XT1032 got stuck at the Google Logo.
Now it says "Image is too large" when i try to mfastboot flash the 4.4.4 system.img and boot.img :crying: