• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[GUIDE] Enable photochrome on in2020

Search This thread

ranjib

Senior Member
Nov 14, 2010
317
44
I tested more and: yes the fourth cam is used in sunlight (we have a rainy day). The picture taken at 12 am is added with ir information:
IMG_20200709_103003.jpg
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    Ok, I stumbled upon this but here it is and I provide no warranty for any of this. You do this at your own risk!:

    Requirement: Bootloader unlocked, Rooted, BACKED UP PERSIST.
    Following this guide: https://www.xda-developers.com/enable-google-stadia-any-android-smartphone/
    Open MagiskManager and look for the MagiskHide Props Config module.
    Install and reboot
    1. Get to ADB or term and type:
      Code:
      props
    2. Type “4” to add/edit custom props.
    3. Type “5” to add/edit custom props.
    4. Type “n” to add a new custom prop.
    5. Type “ro.product.model” to set this prop.
    6. Type “in2025” to set it as the value for “ro.product.model“ (or your proper region)
    7. Type “y” to accept the prop change.
    8. Type “y” to accept the reboot.

    You should now have photochrom!
    sH79PGG.jpg
    2
    Confirmed too on my IN2020, this is great (Art)work, kevkid, thanks!

    Just one small thing; I had to clear camera's cache and storage data to finally have photochrom option appear. Without this final step, it wouldn't. Seems obvious but maybe not for everyone, so you may want to add it as a final step in your instructions maybe.

    Also had to use an adb terminal emulator Android app, and not computer's adb terminal, to have access to the props through that module and be able to edit them.

    Wish there was such an easy way to get back to Widevine-L1 after bootloader's unlocked...
    2
    Anyways to enable it in non rooted devices?
    2
    To undo the camera changes and change back the model no back to default. Try this
    1. Get to ADB or term and type:
      Code:
      props
    2. Type “4” to add/edit custom props.
    3. Type “1” to select the ro.product.model prop.
    4. Type “r” to reset custom prop.
    5. Type “y” to accept the prop change.
    6. Type “y” to accept the reboot.
    1
    This worked on my IN2020 running OOS 10.5.10 IN11AA. Thanks!
    Not possible

    ---------- Post added at 06:34 PM ---------- Previous post was at 05:49 PM ----------

    [/COLOR]
    I am on IN2021 model with Oxygen OS 10.5.10 IN11DA and its working.
    Good