[GUIDE] Firmware,ROM,Recovery and Root- Jiayu S3

Search This thread

Levered

Inactive Recognized Contributor
Feb 11, 2012
2,401
2,240
Malaysia
levered.webs.com
7124924f961cf64ed9d4240912ace279_xl_330x200.jpg


Recovery:


Root:



Firmware and ROM:

BRICK? WRONG FLASH OTHER MODEL FIRMWARE?
-Download latest SP Tool and latest MTK driver
-Extract Jiayu S3 Firmware and open SP Tool
- Select Scatter File from jiayu s3
- Select Firmware Upgrade or Format+download
- Hold Volume up and Down, connect usb (power off mode)
-Wait till your pc detect driver
- Wait till finish
 
Last edited:

Levered

Inactive Recognized Contributor
Feb 11, 2012
2,401
2,240
Malaysia
levered.webs.com
RECOVERY​
TWRP:
What's new in 2.8.4.0:

  • Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
  • Fix some MTP related crashes and bugs.
  • Eliminate TWRP toggling USB IDs during boot if MTP is enabled
  • Fix various adb sideload issues
  • Improve threading of actions
  • Eliminate separate thread for screen timeout
  • Update libblkid to 2.25.0
  • Use power button as back button on watch themes for easier navigation
  • Add mutex locking to data manager
  • Improve custom theme handling on encrypted devices
  • Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens
HOW TO FLASH?
  1. Download Mobile Uncle and TWRP img
  2. Move all mobile uncle.apk and TWRP.img to SDCard
  3. Install Mobile Uncle
  4. Open it, run with root access.
  5. Select Recovery Update
  6. Select recovery.img (twrp recovery img)
  7. Choose 'YES' and then choose 'OK' to reboot
  8. Good Luck ;)


Credit: TFAndroid and Jiayu.es
 
Last edited:

aremafc

Member
Apr 19, 2011
20
2
i can not use recovery.. after go to mobileuncle.. recovery update..choose file.img.. ask reboot and go to recovery
it is reboot but only show android sleep.. not go to recovery.. how to resolve?
 

haasgo

Senior Member
May 22, 2011
1,050
463
Hamburg
Thanks for feedback.. i will try to solve later...

Wouldnt even let me choose a file. Would flashify do the trick? Am not too eager to harm my new device ;)

Edit: just installed supersu from playstore and flashed the recovery.img with flashify without any problems!

Sent from my JY-S3 using XDA Free mobile app
 
Last edited:

Zakerr

Member
Feb 12, 2015
14
18
Vladimir
Method of installation TWRP recovery without using the PC.

1. Settings - Security - superuser - enable (get root)
2. From the site aptoid.com download the application jiayu.es.
m.n101ii-2.store.aptoide.com/app/market/es.jiayu.jiayuid/55/8408762/Jiayu
(or from PlayMarket)
3. In this app: Downloads - TWRP 2.8.4.0 - download starts.
4. After you download: Tools ROMs - Device Tools - Install Recovery - Recoverys downloaded - choose twrpS3Brecovery.Zip - installation Recovery will beginning.
Then app asked to restart in the installed recovery - to accept or reject at your discretion.
Everything! TWRP installed! And this without having to use a PC ;).

More info: teamw.in & tfandroid.es. :good:
 
Last edited:

Top Liked Posts