[GUIDE]Flash Android 2.3.4 with Windows x64/x86

[XLR88]

Prerequisites
AT&T Atrix 4G with and UNLOCKED bootloader
Windows OS x64/x86
Motorola drivers installed

The .zip file listed below contains all the files you need.

Extract this to the root of you C drive and use the following commands in the listed order, one at a time :

Put your device in Fastboot mode by holding the volume down button while booting then volume up
Open up a command prompt and type( ONE AT A TIME )
cd C:\moto-fastboot
moto-fastboot flash boot atrix-2.3.4-hktw-boot.img
moto-fastboot flash system atrix-2.3.4-hktw-system.img
moto-fastboot -w
moto-fastboot reboot

If you followed the steps correctly you should have Gingerbread 2.3.4 on you AT&T Atrix.


Cheers!

Thanks to romracer for compiling the moto-fastboot-win32.

I made this user friendly guide and compiled the .zip with everything you need.


WARNING
The leaked build from Hong Kong / Taiwan was probably not built for a device that is exactly like ours. Test phones can have different hardware. Don't expect everything to work, it's super-duper beta and since we've all only been unlocked 24hrs no one really knows how usable it is! Flash at your own risk... (PS you can 'Skip' Motoblur just by hitting 'Menu' during setup. It won't connect anyway...)

 

[XLR88]

Guide for ROOT

 

[zexbig]

I'm gonna try that right now

 

[mudd_cat23]

Question how would i do this for windows xp 32bit

 

[dcarpenter85]

Can someone tell me what works / doesn't work when using HKTW 2.3.4? Also curious about the speed and stability of the Atrix when using the rom. Is it ready for daily use or should we wait on something else?

 

[dcarpenter85]

Question how would i do this for windows xp 32bit

This guide should work, XP 32bit is x86.

 

[XLR88]

Can someone tell me what works / doesn't work when using HKTW 2.3.4? Also curious about the speed and stability of the Atrix when using the rom. Is it ready for daily use or should we wait on something else?

It can be used as a daily ROM
only the Webtop and Fingerprint read dont work, i believe however there's a fix for the Webtop.

Webtop Fix

 

[dcarpenter85]

It can be used as a daily ROM
only the Webtop and Fingerprint read dont work, i believe however there's a fix for the Webtop.

Webtop Fix

Thanks for the info, I will have to give it a try.

 

[XLR88]

Question how would i do this for windows xp 32bit

More than likely it should work on XP/Vista x64/x86 and I can confirm it works on Windows 7 x64/x86.

 

[jwhited]

Sucks to be me, I guess.

 

[zexbig]

Ok flashed and now need to go trough motoblur wizard

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\moto-fastboot-2.3.4\moto-fastboot>moto-fastboot flash boot atrix-2.3.4-hktw-boot.img
      sending 'boot' (3358 KB)... OKAY [  0.347s]
                writing 'boot'... OKAY [  0.704s]

C:\moto-fastboot-2.3.4\moto-fastboot>moto-fastboot flash system atrix-2.3.4-hktw-system.img
  sending 'system' (262144 KB)... OKAY [ 27.876s]
              writing 'system'... OKAY [ 13.985s]
   sending 'system' (65410 KB)... OKAY [  7.065s]
              writing 'system'... OKAY [  3.377s]

C:\moto-fastboot-2.3.4\moto-fastboot>moto-fastboot -w
            erasing 'userdata'... OKAY [  6.140s]
               erasing 'cache'... OKAY [  2.136s]

C:\moto-fastboot-2.3.4\moto-fastboot>
C:\moto-fastboot-2.3.4\moto-fastboot>moto-fastboot reboot
                     rebooting...

C:\moto-fastboot-2.3.4\moto-fastboot>

 

[jwhited]

Hmm, what the hell could I be doing wrong?

 

[zexbig]

Interesting.. can't login to moto blur..
It say's
Error signing into account
An error has occurred. Please try again..

I check username and pass several times..

 

[XLR88]

Sucks to be me, I guess.

Flash 1.83 SBF using RSDLite and then try again

Copy and paste the commands one at a time instead of typing to prevent errors.

 

[vishurao]

Interesting.. can't login to moto blur..
It say's
Error signing into account
An error has occurred. Please try again..

I check username and pass several times..

Press Menu->Skip
unless you really want MotoBlur. (and i am sure you are the only one in the world who wants blurrrrrrr). If thats the case, blurrr wont work on this build. Go back to 1.83 or some other official release

 

[XLR88]

Interesting.. can't login to moto blur..
It say's
Error signing into account
An error has occurred. Please try again..

I check username and pass several times..

Forgot to mention, Motoblur does not work......press menu and then select skip on the screen.

 

[donniesd]

This was way to easy.



Thank you!!

 

[zexbig]

Well.. there is new option.. during setup press menu button and select skip setup..
It will skip moto blur setup and disable locate my phone trough moto blur but that's about it

 

[Sinful Animosity]

Where do we put the root commands?

/preinstall/dosu
/bin/mount -o remount,rw /system
cp /preinstall/su /system/bin/
PATH=/system/bin:$PATH pm install /preinstall/Superuser.apk

 

[jwhited]

Flash 1.83 SBF using RSDLite and then try again

Copy and paste the commands one at a time instead of typing to prevent errors.

Hmm, I did start from a 1.83 SBF (from a different source, mine was a .7z file.. Worked just the same, though.) I'll try the one from your link, and go from there.

Should just need to flash SBF, unlock, and go, right?