[GUIDE] Flashing Guide / SP Flash Tool Guide | All MediaTek (+Canvas 4/HD/2) | REVIVE

[Yash98]

SP Flash Tool Guide​

Features:

• Revives your phone from almost any brick!
• Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
• Flash CWM Recovery
• Flash Custom ROMs
• Root your device without a root exploit.

Requirements (click on softwares below to download):

• SP Flash Tool
• Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
• Micromax Canvas
• Micro USB Cable
• Windows PC/Laptop

Procedure (for flashing Firmwares):

• Download all (software) requirements to a folder
• Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
• Extract it to a folder (this is the extracted firmware for this guide)
• Install drivers & extract SP Flash Tool to a folder
• Open Flash_tool.exe
• Click Scatter-loading
• Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
• Click Download button or press F9
• Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
• See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
• Restart phone and Done!

To be added:
Screenshots.

 

[Yash98]

RESERVEd

 

[Yash98]

If you are facing the same or similar problems as this:

I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.

I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013...n-one-rom.html
and here : http://forum.xda-developers.com/show....php?t=2466694

but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.

I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)

I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..

Can someone tell me what I'm doing wrong?

What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.

Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)

Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...

 

[badagila]

this will work for other unbranded device?

 

[ManoharMaddineni]

SP Flash Tool Guide​

Features:

• Revives your phone from almost any brick!
• Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
• Flash CWM Recovery
• Flash Custom ROMs
• Root your device without a root exploit.

Requirements (click on softwares below to download):

• SP Flash Tool
• Micromax Canvas 4/HD Drivers
• Micromax Canvas
• Micro USB Cable
• Windows PC/Laptop

Procedure (for flashing Firmwares):

• Download all (software) requirements to a folder
• Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: http://www.tusfiles.net/agbdwr69sc8s )
• Extract it to a folder (this is the extracted firmware for this guide)
• Install drivers & extract SP Flash Tool to a folder
• Open Flash_tool.exe
• Click Scatter-loading
• Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
• Click Download button or press F9
• Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
• See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
• Restart phone and Done!

To be added:
Screenshots.

I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.

I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013/12/micromax-canvas-4-a210-all-in-one-rom.html
and here : http://forum.xda-developers.com/showthread.php?t=2466694

but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.

I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)

I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..

Can someone tell me what I'm doing wrong?

What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.

Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)

 

[Yash98]

I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.

I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013/12/micromax-canvas-4-a210-all-in-one-rom.html
and here : http://forum.xda-developers.com/showthread.php?t=2466694

but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.

I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)

I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..

Can someone tell me what I'm doing wrong?

What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.

Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)

Here this is the answer to everything: http://www.tusfiles.net/7z4wk4m92et5
++++
Also this: http://forum.xda-developers.com/showthread.php?t=2180436

 

[Yash98]

this will work for other unbranded device?

Yep for every goddamn MTK device this is.

 

[badagila]

Yep for every goddamn MTK device this is.

what about on 3t technology tab? are familiar with it?

 

[ManoharMaddineni]

Here this is the answer to everything: http://www.tusfiles.net/7z4wk4m92et5
++++
Also this: http://forum.xda-developers.com/showthread.php?t=2180436

My phone just keeps disconnecting and re connecting to the PC when I try to connect it with the battery, sim, and sd card taken out. (also holding the vol+ button)
Also, can you upload the file to mediafire? TrustFiles has a lot of **** between the file and the user...

 

[Yash98]

CHECK OUT THE NEW WIN 8.1/8/7 64 bit DRIVERS DIRECT BACKUP FROM A WORKING WIN8.1 64BIT INSTALL
BUT MAKE SURE TO: Disable Driver Signature Enforcement (google it exactly like this for instructions)
NOTE: This may show an attention mark in Device Manager. Completely ignore that!

 

[ManoharMaddineni]

If you are facing the same or similar problems as this:

Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...

I tried this on windows 7, and windows 8.

 

[Yash98]

I tried this on windows 7, and windows 8.

Try this driver, now this driver comes from a backup from my Windows 8.1 Pro 64Bit install and should work on your Win8 64bit too,
though you HAVE to disable Driver Signature Enforcement (google it) or else it won't install..
https://mega.co.nz/#!AQwnVapB!ZaC53xZxSoG8dwRqLZFKguXvJJVuEshc4JPtz5yZYGs

 

[ravigandhiarul]

can u say a flash tool for micromax a111?? is this flash tool can be used for micromax a111 doodle which is of same msm8225q chipset number ??

 

[ManoharMaddineni]

If you are facing the same or similar problems as this:

Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...

Tried the new drivers, not working either. my phone just keeps charging. the flashing process does not start what so ever,,,

 

[valent|n0]

hi yash98

I have two phone
one is soft bricked and one is working

there is no ROM available anywhere for this phone

is it possible to extract the rom from the working phone and use it to flash to the bricked phone?

any tutorial on how to do this?

thank you

 

[jjwaiting4u]

Urgent help required

SP Flash Tool Guide​

Features:

• Revives your phone from almost any brick!
• Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
• Flash CWM Recovery
• Flash Custom ROMs
• Root your device without a root exploit.

Requirements (click on softwares below to download):

• SP Flash Tool
• Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
• Micromax Canvas
• Micro USB Cable
• Windows PC/Laptop

Procedure (for flashing Firmwares):

• Download all (software) requirements to a folder
• Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
• Extract it to a folder (this is the extracted firmware for this guide)
• Install drivers & extract SP Flash Tool to a folder
• Open Flash_tool.exe
• Click Scatter-loading
• Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
• Click Download button or press F9
• Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
• See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
• Restart phone and Done!

To be added:
Screenshots.

have canvas 4 a210 problem with imei ( at command send fail) which occurred at changing rom, some on adviced sp flash
but cant use pc since there was charging hardware problem hence usb port cant be used hardware problem ( charging via external battery charging taken out) . need SP tool from sd card if available
thanks

 

[Yash98]

@jjwaiting4u Currently impossible only through Micro USB port possiblity

 

[jjwaiting4u]

help needed

yash got my phone repaired
there was no problem except rain water that had shorted, cleaning the components helped
well
downloaded sptool from another place (your having problem) ,mt 6589 scatter files, recover.imp
connected : usb in off mode... loaded scatter and recover file.......... clicked down load .................nothing
there is something i am not doing right....( PLease note only recovery and boot is with path others dont have any)
thanks for help rendered
jj

 

[jjwaiting4u]

big mess

SP Flash Tool Guide​

Features:

• Revives your phone from almost any brick!
• Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
• Flash CWM Recovery
• Flash Custom ROMs
• Root your device without a root exploit.

Requirements (click on softwares below to download):

• SP Flash Tool
• Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
• Micromax Canvas
• Micro USB Cable
• Windows PC/Laptop

Procedure (for flashing Firmwares):

• Download all (software) requirements to a folder
• Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
• Extract it to a folder (this is the extracted firmware for this guide)
• Install drivers & extract SP Flash Tool to a folder
• Open Flash_tool.exe
• Click Scatter-loading
• Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
• Click Download button or press F9
• Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
• See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
• Restart phone and Done!

To be added:
Screenshots.

Hi yash bhai
things are going from bad to worst but i am not giving up.....so need U
as per your post even can can unbrick canvas4 ....
while using sp too; i used format ( to factory format)
now nothing happens ( pressing down Vol +/_ and power ) cant go into recovery

please help.....
will be great full ( have canvas 4 stock rom downloaded)........?

 

[dhruvdangi]

Driver problem solved

I had the same problem, phone connecting then disconnecting.
Here is a solution for the problem.
1. Install latest drivers
2. Disconnect phone
3. Open SP Flash Tool
4. Select Scatter-loading and select the files required
4. Now here is the trick, in SP Flash Tool, go to ACTION > DOWNLOAD
5. Connect the phone (which should be switched off)