GUIDE - Flashing Stock 4.2.2 JB ROM (Unbricking)
Since there are lot of bugs in KITKAT , I've created this thread to bring you back to JellyBean. Dont worry about warranty, its official XOLO stock ROM, so it wont void ur warranty.
**Sorry to say, am not responsible for anything goes wrong**
Requirements:-
1. Hardware:-
1. PC or Laptop ( any windows OS ).
2. Q1010i and Data Cable.
2. Software:-
1. XOLO Q1010i ROM:-
XOLO Q1010i 4.2.2 Stock JellyBean ROM
https://docs.google.com/uc?id=0B8iR8ffTPNUTeG1wMDQ4S3JwQkE&export=download
XOLO Q1010i 4.4.2 Stock KitKat ROM
https://drive.google.com/uc?id=0B1KjDDEiQivqM1pOcWpsTWJKNFU
2. SP tools V3.1352.01 (Latest)
http://d-h.st/w6v
3. VCOM Drivers:-
https://docs.google.com/file/d/0B9CsA7yjIABHUkQycklWMGtPaVE/edit?pli=1
Installing Drivers:-
1. Installing VCOM Driver:-
--> Download VCOM driver.
--> Extract VCOM Drivers on Desktop.
--> Switch off you Xolo q1010i and just plug usb data cable into it, don't switch on device.
--> Go to Device Manager and you will see Gxxx (New device).
--> Right Click it (click on update driver and locate Vcom folder you extracted early)
(note: if you are using Windows 8 then you must turn of Digital Driver Signing enforcement to install this drivers successfully ===>>>
http://thephuck.com/end-user-computing/how-to-disable-driver-signing-requirement-in-windows-8)
2. Install SP tools software which you have downloaded.
3. Download STOCK ROM:-
Download the STOCK 4.2.2 JB ROM.
Once downloaded, extract the .zip file.
Procedure to Flash Stock ROM (Unbricking) :-
--> Open SP tools software (flash_tool.exe)
--> Click on scatter Loading.
--> choose the MT6582_Android_scatter.txt file in the folder Firmware ( ROM extracted path)
--> Choose Download Only from drop Down and click on DOWNLOAD. (*If it show any error, select Firmware Upgrade from dropdown list and click on DOWNLOAD)
It will load and COMPLETE POPUP will come. The Unplug the phone from PC and turn it ON.
DONE Flashing.
Since there are lot of bugs in KITKAT , I've created this thread to bring you back to JellyBean. Dont worry about warranty, its official XOLO stock ROM, so it wont void ur warranty.
**Sorry to say, am not responsible for anything goes wrong**
Requirements:-
1. Hardware:-
1. PC or Laptop ( any windows OS ).
2. Q1010i and Data Cable.
2. Software:-
1. XOLO Q1010i ROM:-
XOLO Q1010i 4.2.2 Stock JellyBean ROM
https://docs.google.com/uc?id=0B8iR8ffTPNUTeG1wMDQ4S3JwQkE&export=download
XOLO Q1010i 4.4.2 Stock KitKat ROM
https://drive.google.com/uc?id=0B1KjDDEiQivqM1pOcWpsTWJKNFU
2. SP tools V3.1352.01 (Latest)
http://d-h.st/w6v
3. VCOM Drivers:-
https://docs.google.com/file/d/0B9CsA7yjIABHUkQycklWMGtPaVE/edit?pli=1
Installing Drivers:-
1. Installing VCOM Driver:-
--> Download VCOM driver.
--> Extract VCOM Drivers on Desktop.
--> Switch off you Xolo q1010i and just plug usb data cable into it, don't switch on device.
--> Go to Device Manager and you will see Gxxx (New device).
--> Right Click it (click on update driver and locate Vcom folder you extracted early)
(note: if you are using Windows 8 then you must turn of Digital Driver Signing enforcement to install this drivers successfully ===>>>
http://thephuck.com/end-user-computing/how-to-disable-driver-signing-requirement-in-windows-8)
2. Install SP tools software which you have downloaded.
3. Download STOCK ROM:-
Download the STOCK 4.2.2 JB ROM.
Once downloaded, extract the .zip file.
Procedure to Flash Stock ROM (Unbricking) :-
--> Open SP tools software (flash_tool.exe)
--> Click on scatter Loading.
--> choose the MT6582_Android_scatter.txt file in the folder Firmware ( ROM extracted path)
--> Choose Download Only from drop Down and click on DOWNLOAD. (*If it show any error, select Firmware Upgrade from dropdown list and click on DOWNLOAD)
It will load and COMPLETE POPUP will come. The Unplug the phone from PC and turn it ON.
DONE Flashing.
Last edited:
