• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Guide for installing TWRP on OOS 11 Open Beta(Upto closed release 11)

Search This thread

voske15

Senior Member
Sep 7, 2016
60
18
Backup first, that's a must as always.
If coming from OOS 10 base -
1. Flash OOS 11 OB1/hotfix, after its completion do not reboot
2. Install official/unofficial twrp recovery image to ramdisk from advance menu in TWRP
3. Reboot to recovery
4.a. install magisk(optional) and reboot
4.b. repeat 1 and 2, reboot again then, 4.a.

If already on OOS 11 OB1/hotfix-
1. Flash the attached boot.img from bootloader
2. Reboot to recovery from bootloader itself(booting to system at this point will result in bootloop)
3. Follow the process as mentioned for OOS 10

Thx to Soft_M for boot image

NOTE: Above method is not compatible with OB2
OB2,OB3, closed release users directly flash official latest TWRP zip
NOTE: Installing TWRP on OB3 with any given method will cause safety net to fail
 

Attachments

  • twrp3.5.2-11_with_stock_kernel.img
    64 MB · Views: 843
Last edited:

megaslx

Senior Member
Sep 17, 2011
116
17
Shanghai
OnePlus 6
What do I need to do on Beta 2 to get magisk and twrp installed? Currently none of them installed, magisk patched boot.img causes loop
you can follow these steps:
1. install magisk app
2. boot patched boot img with magisk from another thread https://forum.xda-developers.com/t/...beta-1-for-oneplus-6-6t.4304161/post-85408313 through bootloader
3. patch boot image via magisk(if magisk ask you to allow reboot when you first time open it,don't allow it).
4. reboot your phone.you are good to go.
 

romanuks

Member
Dec 10, 2019
9
1

voske15

Senior Member
Sep 7, 2016
60
18
you can follow these steps:
1. install magisk app
2. boot patched boot img with magisk from another thread https://forum.xda-developers.com/t/...beta-1-for-oneplus-6-6t.4304161/post-85408313 through bootloader
3. patch boot image via magisk(if magisk ask you to allow reboot when you first time open it,don't allow it).
4. reboot your phone.you are good to go.
flash the above attached image and reboot to recovery directly, then follow the given procedure
 

Julianocas

Senior Member
Mar 29, 2012
386
127
I had OB3 than I tried to "fastboot boot" latest TWRP to use PixelExperience. I got the QUALCOM message.

So I did the stupid thing to "fastboot flash boot" the latest TWRP. Now I'm bricked.

I will try to flash this one and see what happens. I was trying @mauronofrio unbrick guide, but it goes only until 10.3.8. :(
 

Julianocas

Senior Member
Mar 29, 2012
386
127
I had OB3 than I tried to "fastboot boot" latest TWRP to use PixelExperience. I got the QUALCOM message.

So I did the stupid thing to "fastboot flash boot" the latest TWRP. Now I'm bricked.

I will try to flash this one and see what happens. I was trying @mauronofrio unbrick guide, but it goes only until 10.3.8. :(
It worked. I've manage to get into TWRP and flash the stock O11. Thanks.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    Backup first, that's a must as always.
    If coming from OOS 10 base -
    1. Flash OOS 11 OB1/hotfix, after its completion do not reboot
    2. Install official/unofficial twrp recovery image to ramdisk from advance menu in TWRP
    3. Reboot to recovery
    4.a. install magisk(optional) and reboot
    4.b. repeat 1 and 2, reboot again then, 4.a.

    If already on OOS 11 OB1/hotfix-
    1. Flash the attached boot.img from bootloader
    2. Reboot to recovery from bootloader itself(booting to system at this point will result in bootloop)
    3. Follow the process as mentioned for OOS 10

    Thx to Soft_M for boot image

    NOTE: Above method is not compatible with OB2
    OB2,OB3, closed release users directly flash official latest TWRP zip
    NOTE: Installing TWRP on OB3 with any given method will cause safety net to fail
    2
    Does this work with the HOTFIX build for OB1?
    Yes it does, actually I tested this method on hotfix
    2
    My cell: 0p6, rooted, android 10.3.12, magisk 23 and twrp 3.4.0-11

    Any actual complete guide to upgrade to A11 stable and get twrp working?

    Thanks
    2
    My cell: 0p6, rooted, android 10.3.12, magisk 23 and twrp 3.4.0-11

    Any actual complete guide to upgrade to A11 stable and get twrp working?

    Thanks
    If, as I suspect, OOS 11 repartitions the phone to have one superpartition with virtual images, there will be a long wait until working TWRP is released. Current releases can't handle dynamic partitions.

    Phones with superpartition appeared about 2 years ago and yet there is no TWRP for any of them. For example, Oneplus 8 and higher use exclusively Lineage recovery, which requires side-load (PC) to install a custom rom. Lineage recovery doesn't decrypt data, so, no back up/restore, just flashing via PC.

    So, the ETA is 'wait' or never... .
    1
    I confirmed its working on OB3 OOS 11

    follow the guide -

    1. make sure you are on OOS11 OB3
    2. download the twrp that is provided by author click here
    3. download OOS11 OB3 full rom
    4. go to fastboot mode and flash above twrp .img file by typing "fastboot flash boot twrp3.5.2-11_with_stock_kernel.img"
    5. dont reboot from bootloader. use volume key to toggle recovery mode and then press power button to select recovery mode
    6. then your device will boot into recovery mode (twrp)
    7. now download the latest twrp official zip from here
    8. now move the downloaded OB3 ROM and TWRP zip to your device while you are in twrp recovery (using MTP)
    9. now from twrp , go to Reboot > Recovery
    10. now flash the Full ROM
    11. after flashing , dont reboot.. Now, flash the twrp zip again
    12. now reboot and enjoy..
    13. u can also flash latest magisk to gain root