[GUIDE][HOW TO]Boot into Fastboot Mode

[davpel]

Booting into Fastboot mode is different on the Huawei Watch than with the Moto 360 or the LG G Watch. For the Huawei Watch, perform the following steps:

1) Hold down the power button.
2) The screen will go black for about 2 seconds and then boot into the Huwaei logo. Keep holding down the power button.
3) Wait for the first vibration, release the power button and then immediately give the power button one short press.

If you feel the second vibration, you waited to long to do the release and press. Start over.

Hope this helps others. This took me way too long to figure out on my own.

 

[brizey]

Works great.

Sent from my Nexus 6 using Tapatalk

 

[tomarsenal]

To be more exact, in Step 3) you should release button right AFTER the first vibration, not as soon as the vibration starts.

 

[chachin]

damn this is more complicated than on the lggwatchr :<

 

[eleazar123]

This just saved me. Thanks so much!

 

[DrHRH]

Booting into Fastboot mode is different on the Huawei Watch than with the Moto 360 or the LG G Watch. For the Huawei Watch, perform the following steps:

1) Hold down the power button.
2) The screen will go black for about 2 seconds and then boot into the Huwaei logo. Keep holding down the power button.
3) Wait for the first vibration, release the power button and then immediately give the power button one short press.

If you feel the second vibration, you waited to long to do the release and press. Start over.

Hope this helps others. This took me way too long to figure out on my own.

Thank you so much for this. I was having palpitations after getting stuck in a bootloop with no response from the command line. You're a star!! :good:

 

[Holochronos]

how to exit

thanks to whoever can respond. im in the fastboot menu but how do i exit it ends up looping boot recovery.

 

[Motawa88]

my watch wont even power off when i hold the power button :/ it is stuck on the huawei logo

 

[squigoth]

Thanks for this tip. Now I got to the fastboot menu. Now how do I flash a working image in to the watch? I have the Huawei image from Googles download page, but adb doesn't recognize the device.

 

[abuttino]

Can't you just do "adb boot fastboot"?

Sent from my Nexus 6 using Tapatalk

 

[vsoma]

Thanks for this tip. Now I got to the fastboot menu. Now how do I flash a working image in to the watch? I have the Huawei image from Googles download page, but adb doesn't recognize the device.

Hey if your on fastboot adb no longer works unless you are sideloading. The new command is fastboot....like "fastboot flash system.img" Got it?

 

[Satish Mishra]

I am still not getting your point as how to change the language

 

[skabt]

Booting into Fastboot mode is different on the Huawei Watch than with the Moto 360 or the LG G Watch. For the Huawei Watch, perform the following steps:

1) Hold down the power button.
2) The screen will go black for about 2 seconds and then boot into the Huwaei logo. Keep holding down the power button.
3) Wait for the first vibration, release the power button and then immediately give the power button one short press.

If you feel the second vibration, you waited to long to do the release and press. Start over.

Hope this helps others. This took me way too long to figure out on my own.

yes i can get in to fastboot but i can't do anything there ...

 

[JBCM]

I have the same issue

Got a Huawei W2 watch but the screen was locked (pattern), I already tried fastboot and then Reboot-recovery but it just goes back to main pattern screen and does not give me the option to factory reset... Please help!!

 

[camellouco]

Thank you so much for this. I was having palpitations after getting stuck in a bootloop with no response from the command line. You're a star!! :good:

hi Friend, you saved my life rsss... Thank you so much !!:laugh::good:

 

[Sresky]

Hi there,

Any idea on how to get into Fastboot with a GT 2?