[GUIDE] How to dirty flash 3.5.3 with TWRP, unlocked bootloader and root

[Kartoffl]

guys, is Xposed really necessary to be installed? or i'll be good without it as well?
thanks.

It's optional, just skip it if you don't need it.

Sent from my ONEPLUS A3003 using XDA-Developers mobile app

 

[Kartoffl]

UPDATED for the new 3.5.3 Community Build!
See the first post!

 

[slip666knot]

Thanks! Tested with 3.2.6 + twrp (official) + root.

 

[abhish3kkk]

I have twrp-3.0.2-19-oneplus3.img.zip installed and now I am not able to flash any other recovery. Can anyone help me?
I want to flash CM14 but I think its not possible with this recovery.

 

[hrpanchal]

hello,

i tried that way but it shows some error 7.

please help'

hardik

 

[Kartoffl]

I have twrp-3.0.2-19-oneplus3.img.zip installed and now I am not able to flash any other recovery. Can anyone help me?
I want to flash CM14 but I think its not possible with this recovery.

Flash an older firmware (not rom) for example the 3.2.4 firmware, than reflash your prefered recovery and then flash the rom

hello,

i tried that way but it shows some error 7.

please help'

hardik

Are you sure that you are using the right twrp version 3.0.2-19 and the official community build 3.5.3 and not 3.5.2?

 

[Joyo-rocker]

Confirmed working on flashing atop 3.2.6 running it now but just one problem.. bluetooth audio breaks for me by flashing arise sound mod
everything else is working..
[email protected] fps recording is there..!

 

[hrpanchal]

i m using Teamwin 3.0.2.-0 TWRP and i m trying to flash 3.5.3 offical community build on 3.5.1

hardik

Flash an older firmware (not rom) for example the 3.2.4 firmware, than reflash your prefered recovery and then flash the rom



Are you sure that you are using the right twrp version 3.0.2-19 and the official community build 3.5.3 and not 3.5.2?

 

[quaresma158]

I clean flashed and updated to 3.5.3 successfully, so now can I flash original twrp recovery instead of the modified one? As I know Oneplus has solved that problem with 3.5.3?

 

[sahed01]

i am now at 3.2.6. this thear is okay for me right? if i wanna flash the official 3.5.3? i mean, i wouldn't be here if i could side-load through stock recovery the 3.5.3.
.
and after successfully flashing this 3.5.3 with the help of this custom twrp, how i will return to my stock 3.2.6 without breaking anything like fingerprint sensor!

---------- Post added at 06:12 PM ---------- Previous post was at 06:11 PM ----------

I clean flashed and updated to 3.5.3 successfully, so now can I flash original twrp recovery instead of the modified one? As I know Oneplus has solved that problem with 3.5.3?

same question!

 

[sahed01]

okay. guyes please help??? i used this process over 3.2.6. after dart flashing the phone botted and i used it for 5 min. then i thought maybe i should've have flashed "cleaned" i mean, system, chach, david cash. then i did it. the clean flash. after that my phone won't start up. stuck at boot logo! please help?? :'(

 

[sahed01]

i have lot twrp while clean flashing. how can i get back twrp???

 

[sahed01]

NV. just soled all of my problems by myself! just a quick question, how much space should remain in the system partition after clean flashing 3.53??? anyone ???

 

[ashokmor007]

I saw that many ppl have problems to flash the new 3.5.3 rom with a rooted device and TWRP.
This is how I dirty flashed it successfully without losing personal data (internal storage).
It's pretty easy actually.

If you have already installed the 3.5.2 Community Build and the modified TWRP:

1. Download the full zip 3.5.3 rom from the official OnePlus 3 Website: http://downloads.oneplus.net/devices/oneplus-3/
2. Copy the full zip to the sdcard
3. Copy SuperSU and Xposed(if needed) to the scard (can be found in the attachements)
4. Boot into TWRP and install the full 3.5.3 zip (no data wiping needed)
5. After the full zip installation is done, immediately install SuperSU and Xposed (if needed)
6. Wipe Cache/Dalvik after SuperSu and Xposed is installed
7. Reboot System

NO data will be lost during this process!

If you have an older version than 3.5.2 Community Build:

1. Download the TWRP Recovery 3.0.2-19 from the attachements or from the original post of eng.stk in this thread: http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56 and flash it via "fastboot flash recovery recovery.img" (or however you prefer to install the recovery)
2. Download the full zip 3.5.3 rom from the official OnePlus 3 Website: http://downloads.oneplus.net/devices/oneplus-3/
3. Copy the full zip to the sdcard
4. Copy SuperSU and Xposed(if needed) to the scard (can be found in the attachements)
5. Boot into TWRP and install the full 3.5.3 zip (no data wiping needed)
6. After the full zip installation is done, immediately install SuperSU and Xposed (if needed)
7. Wipe Cache/Dalvik after SuperSu and Xposed is installed
8. Reboot System

NO data will be lost during this process!

I can't guarantee that this is working for you, so make a backup first.
For me everything is working just perfectly, there is no need to reflash TWRP after the update, it's still there!
Every single setting is just like before the update.

Hi I am on the latest build 3.5.3 and when I flash twrp flashing hapens ok but whn i go to recovery mode thr is no recovery on the phone it appears to be black screen...

 

[EpicPlayer]

The Oxygen OS 3.5.4 Community Build just went live. I'm assuming that the installation instructions are the same for 3.5.4 just like when you're upgrading from 3.5.2 to 3.5.3