How To Guide [GUIDE]How to extract img(boot.img, etc...) from payload.bin using payload-dumper-go.

[yashaswee1708]

For 10R only: I have uploaded a few of the extracted boot.img, before extracting if you want you can look for the required boot.img here:

MediaFire

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

1. Download and extract payload-dumper-go.

2. Download and extract OxygenOS firmware zip. (You can find firmware zip for all OnePlus devices here or you can directly download full update zip from Oxygen Updater app.)

3. Move payload.bin from extracted firmware zip to the folder where you extracted payload-dumper-go.

4. To start extracting the img files, type cmd in the address bar and run the following command,

payload-dumper-go.exe payload.bin

5. When the extraction is done, a new folder will be created with all the extracted img.

 

[Suzuka5]

I did got to step 4 but command is not working

 

[yashaswee1708]

I did got to step 4 but command is not working

Check if you have downloaded the correct payload-dumper-go, as you can see there are multiple available on GitHub. Or try different one maybe.

 

[Suzuka5]

no still not working

 

[yashaswee1708]

no still not working View attachment 5758041

Try this one-

https://github.com/ssut/payload-dumper-go/releases/download/1.2.2/payload-dumper-go_1.2.2_windows_amd64.tar.gz

If you have already tried this, then I think you are opening windows power shell, you need to type cmd in the address bar and run the command in cmd.

 

[Suzuka5]

ok that worked thanks

 

[Archimboldi]

Hello, I have a question. I'm not exactly sure what firmware should I download from the telegram server you've linked. I have a Oneplus Ace in which I've flashed OxygenOS 12, and then updated to 12.1 with the phone inbuilt tool. Could you provide any insight on how to proceed? Thanks!

Edit: I have a payload.bin file from when I flashed OxygenOS 12, but I'm worried that it wouldn't be fine after updating to 12.1.

 

[yashaswee1708]

Hello, I have a question. I'm not exactly sure what firmware should I download from the telegram server you've linked. I have a Oneplus Ace in which I've flashed OxygenOS 12, and then updated to 12.1 with the phone inbuilt tool. Could you provide any insight on how to proceed? Thanks!

Can you tell me the exact version you are on?

 

[Archimboldi]

Can you tell me the exact version you are on?

Thanks for your reply! I followed this guide, so I installed this ROM. I see now that it was Oxygen 12.1 what I flashed...

Just to clarify, this phone was bought in Mainland China (in case this information is important).

Also, please check my last post's edit: I have a payload.bin.

Tysm!

This is the info on my phone's info tab:

 

[yashaswee1708]

Thanks for your reply! I followed this guide, so I installed this ROM. I see now that it was Oxygen 12.1 what I flashed...

Just to clarify, this phone was bought in Mainland China (in case this information is important).

Also, please check my last post's edit: I have a payload.bin.

Tysm!

This is the info on my phone's info tab:

So you have OxygenOS 12 A.11 version correct?

 

[Archimboldi]

So you have OxygenOS 12 A.11 version correct?

I think so!

 

[yashaswee1708]

I think so!

Yes, you are. So apparently A.11 is a new update, we usually get the link after sometime.

Other way to download the firmware zip is from Oxygen Updater app from playstore(https://play.google.com/store/apps/details?id=com.arjanvlek.oxygenupdater). While setting up the app, select stable(full) and enable Advanced mode. Then you'll get the option to download the zip.

Please find few screenshots attached.

if you are still unable to figure out ask again here only or join 10R's telegram group I'll help your there.

OnePlus 10R | Community

OnePlus 10R|Ace Global Community Updates Channel : @OnePlus10RUpdates Development Group : @op10Rdevelopment GCAM/Photography Group : @oneplus10RPhotography ‼️NO ETA FOR CUSTOM ROM OR TWRP‼️

t.me

 

[Archimboldi]

I'm on it, thanks, it works like a charm. So, I can patch that bootloader img and root through Magisk, right? Thanks!

 

[yashaswee1708]

I'm on it, thanks, it works like a charm. So, I can patch that bootloader img and root through Magisk, right? Thanks!

Yes

 

[Koeneroenie]

I did got to step 4 but command is not working

no still not working View attachment 5758041

You need to add .\ to your command:

.\payload-dumper-go.exe payload.bin

Then it'll work

 

[RenardHCRc]

I have uploaded few of the extracted boot.img, before extracting if you want you can look for the required boot.img here:

MediaFire

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

1. Download and extract payload-dumper-go.
View attachment 5659763

2. Download and extract OxygenOS firmware zip. (You can find firmware zip for all OnePlus devices here or you can directly download full update zip from Oxygen Updater app.)
View attachment 5659761

3. Move payload.bin from extracted firmware zip to the folder where you extracted payload-dumper-go.
View attachment 5659767

4. To start extracting the img files, type cmd in the address bar and run the following command,

View attachment 5659769

5. When the extraction is done, a new folder will be created with all the extracted img.
View attachment 5659771

Arigato! I had been looking for a while how to extract files from the .BIN files. . . . . from HDD it doesn't take that long approx 5 minutes. . . . . ;-3

 

[pbergonzi]

2. Download and extract OxygenOS firmware zip. (You can find firmware zip for all OnePlus devices here or you can directly download full update zip from Oxygen Updater app.)

This is a no-go with OP7T Pro McLaren (T-Mobile), as the telegram channel for OnePlus does not list the HD1925_11_F.04 firmware, and Oxygen Updater does not support this carrier-only device.
If someone else can provide the boot.omg or full OTA for this device, it would be very helpful.

 

[yashaswee1708]

This is a no-go with OP7T Pro McLaren (T-Mobile), as the telegram channel for OnePlus does not list the HD1925_11_F.04 firmware, and Oxygen Updater does not support this carrier-only device.
If someone else can provide the boot.omg or full OTA for this device, it would be very helpful.

Actually this thread is specifically for 10R so the files uploaded in the mediafire is only for 10R.

If you had your firmware this would have definitely worked. But since you don't have ask in Telegram group chats.

There are multiple telegram groups for OnePlus 7 series. I am sure there someone can help. One of them is @op7discussion. Try searching this channel on telegram.

 

[pbergonzi]

Actually this thread is specifically for 10R so the files uploaded in the mediafire is only for 10R.

If you had your firmware this would have definitely worked. But since you don't have ask in Telegram group chats.

There are multiple telegram groups for OnePlus 7 series. I am sure there someone can help. One of them is @op7discussion. Try searching this channel on telegram.

Thank you.