[Guide] How to flash APPROVED Firmwares on LOCKED BOOTLOADER with NO WIPE

[mihailuican]

The link from Huawei is down

Here is the HiSuite_10.0.0.510_OVE version HiSuite_10.0.0.510_OVE MegaNz

Sorry for the huawei link. It's fate. But works with any new version of hisuite. Just upon installation make sure you allow it through firewall...

 

[Vlixes]

Sorry for the huawei link. It's fate. But works with any new version of hisuite. Just upon installation make sure you allow it through firewall...

Versión 11.0.0.360 doesnt work for me, Im sure allow ir through firewall.

Its work for me with Hisuite version 10

 

[mihailuican]

Versión 11.0.0.360 doesnt work for me, Im sure allow ir through firewall.

Its work for me with Hisuite version 10

Yes, Hisuite version 10 works, that was I got from that huawei forum. Use version 10.
If someone cannot find it on the net, I can share it.
Cheers everyone.

 

[SilviuO]

HiSuite_10.0.1.100_OVE is available ON OP

Hi there,

Why don't you guys use the HiSuite version from OP, HiSuite_10.0.1.100_OVE? I've shared it, is the one i'm using, alongside bellow settings prior finishing installing app...

Uninstall HiSuite from your laptop/PC, restart Windows. Then install HiSuite v10.0.1.100, but don't hit Finish, now go to HiSuite Proxy, open it, press SETUP. After all is done, press finish on HiSuite installation. Then make sure on HiSuite settings proxy adress is enabled and proceed to flash firmware using HiSuite Proxy. I've reccomended this method to all users that asked for help and worked everytime....

Cheers,
SilviuO

 

[coabog]

171 or 179 for C431?

 

[SilviuO]

171 or 179 for C431?

I have v179 on my VOG-L29 C431 and it passes Safety Net + it has a higher build number (488443 + October 23rd release). You could flash v171 too if you want, by using the info's bellow:

ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v480428/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.171

Cheers,
SilviuO

 

[coabog]

How to rollback from VOG-LGRP2-OVS 10.1.0.179 to VOG-LGRP2-OVS 10.1.0.171 ?

 

[SilviuO]

How to rollback from VOG-LGRP2-OVS 10.1.0.179 to VOG-LGRP2-OVS 10.1.0.171 ?

Simple, use the links from my previous post, flash it as you would flash an update. Beware, take a backup before proceeding, it might get you a Factory Reset (i've haven't tested, so i don't know for sure if it will make or not).

Cheers,
SilviuO

 

[lqkhoi]

I've got softbrick and try to recover
Using HiSuiteProxy, I keep getting GBCGroup not match

************************* full_recovery *************************
* udid:true
* VendorCountry:hw-spcseas
* C_Version:C636
* D_version000
* DashBoard:41.003.53.00.06
* DeviceName:VOG-L29
* packageType:full_recovery

Checking the package link I notice These are the 3 links at the beginning of the posts for C636. However, the CUST of the link below is only GBC 2.1 based on the xml.




http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v433814/f1/full/changelog_base.xml
VOG-LGRP2-OVS 10.1.0.145


http://update.dbankcdn.com/TDS/data...v396050/f1/full/changelog_cust_hw_spcseas.xml
VOG-L29-CUST 10.0.0.10(C636)


http://update.dbankcdn.com/TDS/data...1/f1/full/changelog_preload_hw_spcseas_R1.xml

VOG-L29-PRELOAD 10.0.0.3(C636R1)


Where can I find the newer cust to recover mine?


Tks a lot for your help

 

[skodann]

I've got softbrick and try to recover
Using HiSuiteProxy, I keep getting GBCGroup not match

************************* full_recovery *************************
* udid:true
* VendorCountry:hw-spcseas
* C_Version:C636
* D_version000
* DashBoard:41.003.53.00.06
* DeviceName:VOG-L29
* packageType:full_recovery

Checking the package link I notice These are the 3 links at the beginning of the posts for C636. However, the CUST of the link below is only GBC 2.1 based on the xml.




http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v433814/f1/full/changelog_base.xml
VOG-LGRP2-OVS 10.1.0.145


http://update.dbankcdn.com/TDS/data...v396050/f1/full/changelog_cust_hw_spcseas.xml
VOG-L29-CUST 10.0.0.10(C636)


http://update.dbankcdn.com/TDS/data...1/f1/full/changelog_preload_hw_spcseas_R1.xml

VOG-L29-PRELOAD 10.0.0.3(C636R1)


Where can I find the newer cust to recover mine?


Tks a lot for your help

Here you go http://update.dbankcdn.com/TDS/data...v462507/f1/full/changelog_cust_hw_spcseas.xml

Or this one http://update.dbankcdn.com/TDS/data...v462506/f1/full/changelog_cust_hw_spcseas.xml

 

[idontlikeyou]

I have v179 on my VOG-L29 C431 and it passes Safety Net + it has a higher build number (488443 + October 23rd release). You could flash v171 too if you want, by using the info's bellow:

ON Package URL copy following link (open link in browser and then copy URL) – http://update.dbankcdn.com/TDS/data/files/p3/s15/G5731/g1755/v480428/f1/full/changelog_base.xml
ON Point Version you have to tick it and write : VOG-LGRP2-OVS 10.1.0.171

Cheers,
SilviuO

. 171 passes safety net on c431
I can't upload photo ?

 

[nutellapr]

Hey wow, thanks for all your work on this board! I have a VOG-L29 C636 still on 10.0.0.190. I've looking for the base, cust and preload links to get to 10.1 using Hisuite Proxy. Trying just the 10.1.0.145 base upgrade errors. Thanks for the assistance.

 

[SilviuO]

If you haven't read the news for EMUI 11 (update for Harmony OS 2 later), take a look at this posts bellow:

Huawei announces schedule for stable EMUI 11 update & Harmony OS alleged eligible devices list appears - 42 phones make the cut.

I'm more than sure that we'll get EMUI 11 earlier than they will start releasing, as we did with EMUI 10&EMUI 10.1. As soon as dload firmware or base packages + custs+preloads will be available i will post them

Cheers,
SilviuO

 

[reujea0]

Hello, how do I find the exact model. I have a L29, was failing CTS/safetynet. Tried the 431 and still not passing safetynet, have tried erecovery but nothing on both 171 and 179, same back on 169or163 i don't remember correctly. I would really appreciate the help

 

[rm001]

If you haven't read the news for EMUI 11 (update for Harmony OS 2 later), take a look at this posts bellow:
I'm more than sure that we'll get EMUI 11 earlier than they will start releasing, as we did with EMUI 10&EMUI 10.1. As soon as dload firmware or base packages + custs+preloads will be available i will post them
SilviuO

OTA-MF called VOG-L29-PRELOADC432R21B3 (11.0.0.3) appeared today in FF. Build #494625, 215 Mbytes
P.S. 300 devices in the 432 region (in Turkey) will receive the first beta on 01.12.2020, and indeed, this update in the FF is for the 432 region.

 

[cetkovicmarko]

After download in hi suite on hi suite proxy method, says that my phone is soft-branded and exits Hi suite... What to do?

 

[SilviuO]

After download in hi suite on hi suite proxy method, says that my phone is soft-branded and exits Hi suite... What to do?

PLS check your PM

SilviuO

 

[cygnus_xp]

PLS check your PM

SilviuO

same here

 

[cetkovicmarko]

Unable to install tried so many ways, only dload method works but my cust is still old e19 instead e23. And my phone doesn't have Huawei account by default and HMS core I have icon also.

 

[SilviuO]

same here

View attachment 5146649

Have you tried with dload firmware from my dload thread?

Also, try using HiSuite from OP, maybe that version + HiSuite Proxy will let you flash firmware, after accepting authentification bridge...

SilviuO