[GUIDE] How to flash MIUI 10 build on your phone

[hikari_calyx]

NOTE:
This guide is meant for this thread: https://forum.xda-developers.com/nokia-7-plus/development/9-0-miui-10-nokia-fihgsisdm66064-t3900312
This guide may unusable on newer builds in the future.

In case you want to restore back to stock, firmware can be downloaded from https://fih-firmware.hikaricalyx.com/index_en.html and you can flash it with either patched OST LA or NOST.

It's tested on following models:
PL2 Nokia 6.1 TA-1054
DRG Nokia X6 TA-1099
C1N Nokia 7 TA-1041
B2N Nokia 7 Plus TA-1062
Flash it at your own risk if your type is not listed above.

To Chinese users:
请点击下面的链接阅读中文版教程。
如需转载请通过 Coolapk 私聊联系我。
Please read Chinese guide from here: https://www.coolapk.com/feed/103010...id=1121588&shareFrom=com.coolapk.market_9.0.1

Let me introduce you how to flash MIUI build.
In this guide, we will take "Nokia-miui10-2019-02-13.img.xz" build for example.

Part 1: Bootloader Unlock
I won't introduce you how to unlock the bootloader for your phones here.

Part 2: Install latest Android Pie build
I'm not sure about latest Android Pie build for Global Android One Devices, but AFAIK the Chinese builds we've tested are all [fih_codename]-347C-0-00CN-B04, January 2019 Update.
Make sure you have installed this build.

For your convenience, you can download following full OTA that we tested:
B2N-347C-0-00CN-B04: https://ota-filesite.c2dms.com/SWImage/500002276

Part 3: Flash the system itself

Download packages from ROM topic, and make sure you have extracted the img.xz file.

You must use Platform Tools provided by Google: https://developer.android.com/studio/releases/platform-tools
I'm not sure if Minimal ADB and Fastboot package is usable.

Boot your phone to Fastboot / Download mode, then execute this command:

.\fastboot flash system D:\Nokia-miui10-2019-02-13.img

To flash the system image to your current slot, no matter if it's slot A or B.

Format the userdata partition and reboot bootloader again to prevent temporarily boot failure:

.\fastboot -w reboot-bootloader

Part 4: Install permission patches to patch vendor, and root it

Boot into TWRP temporarily, but it depends on you if you want to install TWRP permanently:

https://forum.xda-developers.com/nokia-7-plus/development/recovery-twrp-3-2-3-0-t3892644

In this example we do not install TWRP permanently.

Swipe the button to allow system modification, and connect your phone to PC, copy FBE_Disabler.zip, Magisk-v18.1.zip, Permissiver_v2.zip and vendor-2019-02-16.zip you downloaded to internal storage of your phone.

In case you want to ask, Magisk can be downloaded from https://github.com/topjohnwu/Magisk/releases

Tap "Mount" on your phone and check both "vendor" and "system" partition to mount them.
Click back, Tap "Install", and install these 4 zip packages in character order.

After installed, please reboot your phone and ignore the TWRP Official App installation prompt.
Please wait at least 3 minutes for booting.

After your phone boots, you'll find the default language is Simplified Chinese. Here's how to to change the language to non-Chinese:
- Open "设置" (Settings)
- Tap "更多设置" (More Settings)
- Tap "语言和输入法" (Languages and Input)
- Tap "语言" (Language)
- Choose your own language

Hope you can find it lol.

Then, please download and install Magisk Manager on your phone and reboot your phone.


Part 5: Fix Xiaomi Account issue, and GMS feature
Copy "MIUI_Account_Fix.zip" to Download directory of internal storage, and add this as Magisk Module under Magisk Manager, then reboot.

If it's too difficult for you to enter your phone to MTP mode, here's the trick:
- Connect your phone to PC when screen UNLOCKED
- When the phone prompts "USB is connected", tap the prompt
- Tap "Data Transfer (MTP)"
- You may need to drag the notification center and choose again
- Copy required files

Copy gms.apk to your phone and install it on your phone directly. Install it may take few minutes and please wait patiently. After installation completed, you can login both Xiaomi Account and Google Account properly.
I needn't to mention how to replace the camera, it's pretty easy.

That wraps up the whole guide.

 

[-deadpool-]

Done a nice work mate ...

 

[henri_p]

Wondering if this could run on the Aquos S3 6/128 .. it's basically the same hardware

 

[hikari_calyx]

Wondering if this could run on the Aquos S3 6/128 .. it's basically the same hardware

No you can't, as I've tested it on Sharp Aquos S2 SS2 and SAT.
FIH already abandoned both S2 and S3 and they even don't release Android 9.0 for them unlike Japanese Sharp Android One devices.

 

[henri_p]

Pretty much sucks, I have an S3 6/128 with locked bootloader, seems it sadly going to stay at Oreo with that silly UI on top of it :crying: ... too bad, the device looks great and is of a good quality built

 

[Faisal kacho]

can i flash at without bootunlocked i have nokia 7

 

[k3dar7]

can i flash at without bootunlocked i have nokia 7

No

 

[Faisal kacho]

No

Thankz If i use ost tOol then

 

[rahul387]

In my nokia 6.1 plus it couldn't install .. when i try to flashing system img file its eror volume full ..
Can anyone fixed this problem?

 

[[email protected]]

can i install this gsi on my nokia 7 plus global version?

 

[IMRAND]

Hr bro, I get the same error as u mentioned above. Please reply back if u have succeeded.

---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------

In my nokia 6.1 plus it couldn't install .. when i try to flashing system img file its eror volume full ..
Can anyone fixed this problem?

Hi bro, I get the same error as mentioned above reply back if u have succeeded.

 

[love2050s]

how to

@hikari_calyx
how to flash [fih_codename]-347C-0-00CN-B04, January 2019 Update. ? i try OST6.2.8 but not flash finish
my device DRG Nokia X6 TA-1099 (00CN_2_21F) bootloader unlock
help my how can i flash 347C-0-00CN-B04
today i download DRG-347C-0-00CN-B04.full.Zip and trying but failed
how can i installed MIUI help me

NOTE:
This guide is meant for this thread: https://forum.xda-developers.com/nokia-7-plus/development/9-0-miui-10-nokia-fihgsisdm66064-t3900312
This guide may unusable on newer builds in the future.

In case you want to restore back to stock, firmware can be downloaded from https://fih-firmware.hikaricalyx.com/index_en.html and you can flash it with either patched OST LA or NOST.

It's tested on following models:
PL2 Nokia 6.1 TA-1054
DRG Nokia X6 TA-1099
C1N Nokia 7 TA-1041
B2N Nokia 7 Plus TA-1062
Flash it at your own risk if your type is not listed above.



Let me introduce you how to flash MIUI build.
In this guide, we will take "Nokia-miui10-2019-02-13.img.xz" build for example.

Part 1: Bootloader Unlock
I won't introduce you how to unlock the bootloader for your phones here.

Part 2: Install latest Android Pie build
I'm not sure about latest Android Pie build for Global Android One Devices, but AFAIK the Chinese builds we've tested are all [fih_codename]-347C-0-00CN-B04, January 2019 Update.
Make sure you have installed this build.

For your convenience, you can download following full OTA that we tested:
B2N-347C-0-00CN-B04: https://ota-filesite.c2dms.com/SWImage/500002276

Part 3: Flash the system itself

Download packages from ROM topic, and make sure you have extracted the img.xz file.

You must use Platform Tools provided by Google: https://developer.android.com/studio/releases/platform-tools
I'm not sure if Minimal ADB and Fastboot package is usable.

Boot your phone to Fastboot / Download mode, then execute this command:

.\fastboot flash system D:\Nokia-miui10-2019-02-13.img

To flash the system image to your current slot, no matter if it's slot A or B.

Format the userdata partition and reboot bootloader again to prevent temporarily boot failure:

.\fastboot -w reboot-bootloader

Part 4: Install permission patches to patch vendor, and root it

Boot into TWRP temporarily, but it depends on you if you want to install TWRP permanently:

https://forum.xda-developers.com/nokia-7-plus/development/recovery-twrp-3-2-3-0-t3892644

In this example we do not install TWRP permanently.

Swipe the button to allow system modification, and connect your phone to PC, copy FBE_Disabler.zip, Magisk-v18.1.zip, Permissiver_v2.zip and vendor-2019-02-16.zip you downloaded to internal storage of your phone.



Tap "Mount" on your phone and check both "vendor" and "system" partition to mount them.
Click back, Tap "Install", and install these 4 zip packages in character order.

After installed, please reboot your phone and ignore the TWRP Official App installation prompt.
Please wait at least 3 minutes for booting.

After your phone boots, you'll find the default language is Simplified Chinese. Here's how to to change the language to non-Chinese:
- Open "设置" (Settings)
- Tap "更多设置" (More Settings)
- Tap "语言和输入法" (Languages and Input)
- Tap "语言" (Language)
- Choose your own language

Hope you can find it lol.

Then, please download and install Magisk Manager on your phone and reboot your phone.


Part 5: Fix Xiaomi Account issue, and GMS feature
Copy "MIUI_Account_Fix.zip" to Download directory of internal storage, and add this as Magisk Module under Magisk Manager, then reboot.



Copy gms.apk to your phone and install it on your phone directly. Install it may take few minutes and please wait patiently. After installation completed, you can login both Xiaomi Account and Google Account properly.
I needn't to mention how to replace the camera, it's pretty easy.

That wraps up the whole guide.