{guide}[how to] porting guide for aosp [how to]{guide}

[The Archangel]

Ya both r the same..

Sent from my E10i using Tapatalk 2

Check the kernel, add a new one

If I helped, give thanks, if you please.
........Death before dishonor........
Team inferno
Leader

 

[...Awesome...]

Ya both r the same..

Sent from my E10i using Tapatalk 2

You have to use their build.prop if u booted and bootanimation showed and it vibrated u ended up in a boot loop which means its your boot.img or kernel

Sent from my My Touch 4G using Tapatalk

 

[harry47]

Jst clear tis point.. I took the boot.img from custom kernel n replaced it.. I flashed n I got status 7 error.. bt I checked n build.prop was correct.. so wat shld I do nw??

Sent from my E10i using Tapatalk 2

 

[...Awesome...]

Jst clear tis point.. I took the boot.img from custom kernel n replaced it.. I flashed n I got status 7 error.. bt I checked n build.prop was correct.. so wat shld I do nw??

Sent from my E10i using Tapatalk 2

Then its your boot.img do this use the ported boot.img first if u get the same error then try replacing the kernel if u get the same error use YOUR boot.img with their kernel but its not your build.prop if that was it u wouldn't make it that far

Sent from my My Touch 4G using Tapatalk

 

[harry47]

Tried with boot.img of the porting rom, tried with my original cm rom and even with no boot.img still no change.. The same status 7 error..

 

[cowsquad]

Tried with boot.img of the porting rom, tried with my original cm rom and even with no boot.img still no change.. The same status 7 error..

Have you checked ur build.prop? If yes, have you checked your updater-script to see if your get ro.build matches?

Sent from my Droid using Tapatalk 2

 

[harry47]

Ya I fully checked it thoroughly.. its all d same from the cm port..

Sent from my E10i using Tapatalk 2

 

[cowsquad]

Ya I fully checked it thoroughly.. its all d same from the cm port..

Sent from my E10i using Tapatalk 2

Status 7 is related to build.prop have you checked ur recovery log. Like right after you install ur zip and start booloping, try to get recovery and abd log cat

Sent from my Droid using Tapatalk 2

 

[...Awesome...]

Might be your framework-res

Sent from my My Touch 4G using Tapatalk

 

[harry47]

The installation is aborted wit status 7 report.. thr is no booting wit tat.. the zip is not installed fully..

Sent from my E10i using Tapatalk 2

 

[cowsquad]

The installation is aborted wit status 7 report.. thr is no booting wit tat.. the zip is not installed fully..

Sent from my E10i using Tapatalk 2

Have you mounted system in recovery before intalling ur zip?

Sent from my Droid using Tapatalk 2

 

[The Archangel]

Sounds like the the updater script isn't correct, like it's not installing anything.

If I helped, give thanks, if you please.
........Death before dishonor........
Team inferno
Leader

 

[harry47]

Ya I did tat.. so wat can I do abt updater script..

Sent from my E10i using Tapatalk 2

 

[The Archangel]

Ya I did tat.. so wat can I do abt updater script..

Sent from my E10i using Tapatalk 2

Make sure it matches the other updater script

But still has the right stuff changed so it will boot.

If I helped, give thanks, if you please.
........Death before dishonor........
Team inferno
Leader

 

[thinksecretly]

Ok i want to start by saying very good guide... (also thanks for all the other work you done for the glacier) i am very new to all this, but i like to mess around with things.

So my question is (probably a noob question to say the least)when i was reading through the comments i saw that you need cm9 as a base to port ics (makes sense). since there is no Cm9 for glacier where would i obtain an ics base?

Again thank you and sorry if you look at this and laugh. at least i put a smile on someones face with my noobness.

 

[saranhai]

Ok i want to start by saying very good guide... (also thanks for all the other work you done for the glacier) i am very new to all this, but i like to mess around with things.

So my question is (probably a noob question to say the least)when i was reading through the comments i saw that you need cm9 as a base to port ics (makes sense). since there is no Cm9 for glacier where would i obtain an ics base?

Again thank you and sorry if you look at this and laugh. at least i put a smile on someones face with my noobness.

you can just use the unofficial one here, or CM9: Operation Inferno. but now, it doesn't have to be CM9, as long as the base is ICS for the Glacier, it's all good.

 

[thinksecretly]

you can just use the unofficial one here, or CM9: Operation Inferno. but now, it doesn't have to be CM9, as long as the base is ICS for the Glacier, it's all good.

Thats kind of what i figured... Thank you

 

[saranhai]

Thats kind of what i figured... Thank you

Thank YOU for giving my 1000th thanks.

wow...1000 thanks...love this community!

 

[thinksecretly]

Thank YOU for giving my 1000th thanks.

wow...1000 thanks...love this community!

HAHA You deserve it.... And also what do i win?

Edit: NVM i won my first thanks!!!!!!!!

 

[bmg1001]

Nevermind. (Mods please delete this post, I asked a question but found out the anwser myself)