• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[GUIDE] How to root MT4GS with any HBOOT (updated 11/14/12)

Search This thread

jjbz

Senior Member
Jun 14, 2012
69
56
NJ
*****
EDIT: PLEASE READ!!!!!!! Before proceeding, you need to find out which hboot your device has and if your device is S-ON or S-OFF. Ensure that Settings>Power>Fast Boot is unchecked and power down your device. Once your device is powered down, hold Power+Volume Down until you reach the bootloader screen.

On the second line, it should say "DOUBLESHOT PVT SHIP S-ON" or "DOUBLESHOT PVT SHIP S-OFF." If you are already S-OFF, great! You can flash a custom recovery in step 5 of this guide (although you need to have ADB/Fastboot installed on your Windows PC).

Your device is most likely S-ON. If so, continue reading. On the third line, your hboot information should be listed. If you have HBOOT-1.45.0013, you have the newer hboot and can follow this entire guide to achieve root. Most newer devices have HBOOT-1.45.0013.

If by chance you have the older HBOOT-1.44.0007, you have two options for rooting your device:

1. Use Revolutionary.io to gain S-OFF on your device. After using Revolutionary to achieve S-OFF, you can install adb/fastboot on your computer (in case you haven't done so already) and continue from step 5 of this guide to flash a custom recovery and Superuser for root,

OR

2. Update to latest OTA release and use this guide from beginning to end. You can update to the latest OTA release by going to Settings>About Phone or by using Blue6IX’s post “How-To: Restore to Stock.” Either method will update you to the latest OTA release (1.63.531.2) and HBOOT-1.45.0013.

IMPORTANT NOTE: If you update to latest OTA release with HBOOT-1.45.0013, you will NOT be able to revert back to the older hboot and S-OFF unless you use JuopunutBear to S-OFF. This involves a "wire trick" that some people are not comfortable with.

Many users have successfully achieved S-OFF with JuopunutBear (including me), but others have reported that it bricked their phone. This is usually because they do not follow the directions that say not to touch the bare wire. Check out the JB S-OFF threads here and here for other users’ experiences.

Confused about S-ON vs S-OFF? S-ON, Revolutionary S-OFF, and JuopunutBear S-OFF are described in detail here.

Revolutionary S-OFF is for HBOOT-1.44.0007. JuopunutBear S-OFF is for HBOOT-1.45.0013. Got it? Good.
*****





This is a step-by-step guide for rooting the MT4GS, designed specifically for new users (aka NOOBS), by a noob. The process is slightly more complicated than rooting other devices (i.e. Samsung), but it is well worth it.

The MT4GS is one of the best qwerty phones on the market and has some of the best developers. Don’t let the process discourage or intimidate you. Just FOLLOW EACH STEP IN SEQUENTIAL ORDER and you’ll be fine.

Here’s a breakdown of the process:
1. INSTALL HTC DRIVERS ON YOUR PC.
2. INSTALL ADB AND FASTBOOT ON YOUR PC.
3. REGISTER AT HTC DEV.
4. UNLOCK BOOTLOADER THROUGH HTC DEV.
5. INSTALL A CUSTOM RECOVERY.
6. ROOT YOUR DEVICE.
7. USE JUOPUNUTBEAR TO GAIN S-OFF (OPTIONAL).


-PREREQUISITES-
Before getting started, please visit the MT4GS Compendium and read over Section One to learn the XDA Lingo. You really need to know this stuff if you’re going to tinker with the MT4GS.

Also, all information in the guide assumes you are using a Windows PC and a MT4GS with the STOCK ROM AND HBOOT-1.45.0013. If you are not on the Stock ROM, please use Blue6IX’s post “How-To: Restore to Stock.” Be sure to use the latest OTA (1.63.531.2). Once you're all set, let’s begin, shall we?

Disclaimer: I am not responsible for anything that happens to your phone. You assume all risks associated with modifying your phone.


-1. INSTALL HTC DRIVERS ON YOUR PC.-
Install the HTC Drivers on your PC from here.

Before connecting your phone, make sure USB Debugging is enabled (Settings>Applications>Development>USB Debugging).

Tip: to save time later, turn off your phone, hold down Power & Volume Down simultaneously until you reach the bootloader. Use the volume buttons to navigate to FASTBOOT and select it with the power button. Connect your phone via USB and the bootloader should now say FASTBOOT USB mode. Allow your PC to install the required drivers automatically. It may take a few minutes for your PC to search for and install drivers, so be patient.


-2. INSTALL ADB AND FASTBOOT ON YOUR PC.-
Installing ADB and fastboot on your PC is easy. Follow this guide and you’re good to go. To confirm that you have successfully installed ADB and fastboot, connect phone (with USB Debugging enabled) to PC via USB, open command prompt, and type “adb devices”. Your device ID number should be listed. Here are some useful commands for ADB and fastboot.


-3. REGISTER AT HTC DEV.-
Self-explanatory. Visit HTCDev.com and sign up with a valid e-mail address, as you’ll be receiving your Unlock_code.bin from HTC through this e-mail. Use an alternate browser such as IE, Google Chrome, or Mozilla Firefox if HTC Dev doesn’t play nice with your current browser of choice. Personally, I had to switch between Chrome and Firefox to get the HTC Dev website to cooperate.


-4. UNLOCK BOOTLOADER THROUGH HTC DEV.-
Make sure you’re logged in to HTC Dev and follow on-screen instructions to unlock bootloader. FYI, our device is listed as “myTouch 4G Slide (T-Mobile US)”. You can skip HTC’s instructions until step 5 since they're just telling you how to install ADB and fastboot, but you should already have ADB and fastboot installed :D.

After you finish unlocking the bootloader, the first line in your bootloader should read “*** UNLOCKED ***”.


-5. INSTALL A CUSTOM RECOVERY.-
Download official ClockworkMod Recovery 5.0.2.7 from the ROM Manager website or download another custom recovery from the MT4GS Development section. For instruction purposes, I will assume that you use official CWM Recovery 5.0.2.7. Save the img file to C:\.

Put your phone in bootloader FASTBOOT mode and connect to PC. Go to command prompt on PC and type “fastboot devices”. Once your device ID is listed, type “cd\” to get to “C:\” directory. Then type “fastboot flash recovery recovery-clockwork-5.0.2.7-doubleshot.img”.

After fastboot finishes, disconnect your MT4GS, go into bootloader, and go to “RECOVERY.” You should now be in ClockworkMod Recovery 5.0.2.7. The first thing I would do in CWM Recovery is make a backup of your stock ROM for safe keeping.

NOTE: Use volume buttons or trackpad to navigate through CWM Recovery 5.0.2.7. Select items by pressing the trackball. Power button may make your screen go blank and Back button returns you to the previous menu.


-6. ROOT YOUR DEVICE.-
Now that you have a custom recovery, you can flash custom ROMs. These custom ROMs are already rooted with Superuser and binary files.

NOTE: If you are S-ON, installing a custom ICS ROM will require an extra step in fastboot. You will have to extract the “boot.img” from the ROM and flash it with fastboot after installing the ROM in CWM recovery. More information from Limewirelord.

HOWEVER, if you want to root the STOCK ROM and/or continue to step 7 to achieve JuopunutBear S-OFF, you’ll have to root the device yourself. This is very simple. Download Superuser ZIP from androidsu.com/superuser. I can only recommend version 3.0.7 efgh because that is the only one I have tested, but newer versions may work.

Place the “Superuser-3.0.7-efgh-signed” on the ROOT of your SD card. Go to CWM Recovery and use “install zip from sdcard” to flash the Superuser zip. If installation aborts or fails the first time, try to flash the zip again until installation is complete. Reboot your phone and check in your apps to see if Superuser app is there. If so, congratulations, you have successfully rooted your stock MT4GS!


-7. USE JUOPUNUTBEAR TO GAIN S-OFF (OPTIONAL).-
Achieving S-OFF will make your life a lot easier if you want to flash custom ROMs, especially ICS ROMs. Follow instructions for JuopunutBear at unlimited.io and check out the JB S-OFF thread for other users’ experiences.

As I said before, if you are S-ON, flashing ICS ROMs will require an extra step in fastboot. You will have to extract the “boot.img” from the ROM and flash it with fastboot after installing the ROM in CWM recovery. More information from Limewirelord.

If you are S-OFF, you can bypass this step. For this reason alone, I highly recommend JB S-OFF if you have a half hour to spare and some courage for the wire trick. In this post, Indirect explains why JB S-OFF is superior to S-ON and Revolutionary S-OFF. Also, S-ON Unlocked, Revolutionary S-OFF, and JuopunutBear S-OFF are described in detail here.

However, if you plan on staying on stock-based/Gingerbread ROMs, S-OFF may be unnecessary for you. There are pros and cons to staying on 2.3 Gingerbread vs. upgrading to 4.0 ICS (like the stock HTC camera), but I’ll let you make that decision for yourself.

JB S-OFF NOTE: Users have reported that certain SD cards prevent JB S-OFF from working properly. If the wire trick doesn't work for you, try using another SD card and make sure it's formatted to a "FAT" file system and over 512mb in size (thanks to demkantor for this tip).

/ENDGUIDE





Hopefully this guide has helped you in some way. XDA has helped me out a lot and I simply wanted to contribute to the community that has given me so much. Feel free to share this guide with noobs in case they have questions about rooting their device (for the millionth time).

It is my hope that this guide aids in answering MOST noob root/modding/”this ROM broke my phone” questions. Noobs, please use the search function and many of the resources at your disposal BEFORE posting another thread. Everyone is here to help, so do your best not to annoy the MT4GS devs and vets.

We all were or still are noobs, so we understand your plight. However, we have seen WAYYYY too many threads that ask the same question over and over. Please consider the devs and XDAers that help you for free. Use the search function and remember to hit the “thanks” button. Thank you!

/ENDPSA





P.S. Shout out to the awesome MT4GS devs and contributors. You guys rock!
-Blue6IX
-tbalden
-kornyone
-xmc wildchild22
-strapped365
-sun_dream
-Riyal
-WeekendsR2Short
-anyone else I forgot, you go here!


P.P.S. If any links are broken, click on WeekendsR2Short's name above for alternative mirrors. Be sure to press the 'Thanks' button for him!

P.P.P.S. Thanks to ac3theone for this tip. If you begin experiencing an intermittent data issue on any ICS ROM (where your data turns on and off rapidly with a the 'H', '3G,' or data symbol flashing), try going to CWM Recovery and doing a wipe cache/dalvik and FIX PERMISSIONS. Hopefully this solves your intermittent data issue. This issue is ICS specific, so flashing back to a stock-based Gingerbread ROM should also fix the problem.
 
Last edited:

strapped365

Senior Member
Mar 14, 2011
5,161
2,797
Columbus
i was originally s-off with the rev method and i followed blues how to on how to return to s-on then i updated all the way to the newest ota. I followed this guide and every link posted in the op and a couple hours later im back to s-off ( wire trick ). this guide should really be stickied! im very appreciative that you took the time to lay this out for new users! even though im not i still dont know it all
 
  • Like
Reactions: jjbz

eparico

Senior Member
Jun 20, 2012
76
11
Thanks for this guide, there are a lot of threads explaining how to do this but they were all over the place. Until last night, I was S-ON, unlocked but I decided to brave the wire trick and after about a million attempts, am now S-Off. I used this page as my reference starting point throughout since I had to go back to stock. Much appreciated!
 

pantheis

Senior Member
Dec 28, 2009
50
3
I was going to unlock my device and get Clockworkmod installed, but hold off on anything else for the time being. When I went to HTC's website to obtain the unlock file, they indicated that unlocking the device would also wipe it clean. Is this the case or can you use the HTC Unlock and retain all of the current data on your device?

I was hoping to get CWM installed and then do a full backup of everything on my device as it currently stands before starting to play around with any custom roms.
 

jjbz

Senior Member
Jun 14, 2012
69
56
NJ
HTCDev factory resets your phone no matter what. You need to do it in order to get CWM on your phone.

If you absolutely need to backup stuff that isn't on your SD card, look into finding an app that can do a backup without root (i.e My Backup). I can't personally recommend one because I've never used one.

Once you're rooted, you can use CWM and a good backup app like Titanium Backup (paid version is definitely worth it).
 

pantheis

Senior Member
Dec 28, 2009
50
3
HTCDev factory resets your phone no matter what. You need to do it in order to get CWM on your phone.

If you absolutely need to backup stuff that isn't on your SD card, look into finding an app that can do a backup without root (i.e My Backup). I can't personally recommend one because I've never used one.

Once you're rooted, you can use CWM and a good backup app like Titanium Backup (paid version is definitely worth it).

Alright, I figured that was going to be the case but I was hopeful that maybe I was wrong. :)
Thanks!
 

jb0ne

Senior Member
Dec 7, 2011
490
65
What about mytouch q non-slide?

Does this work for the new tmobile mytouch q that DOESN'T have the qwerty keyboard? Since there's no forum for this phone yet...
 

jjbz

Senior Member
Jun 14, 2012
69
56
NJ
I found it now thanks, but none of the links for either custom recovery are working? What's with that? I'm doing this for my friend and unlocked his bootloader last night, but when I went to get the custom recovery none of the links work?

I just checked the link CWM Recovery link in step 5 and it worked for me. Download from here if that doesn't work. Recoveries are in the first post. WeekendsR2Short was kind enough to host most of the dev-related files so make sure to press the "Thanks" button for him.
 

demkantor

Inactive Recognized Contributor
Nov 10, 2011
6,858
3,752
mpls
had to thank you for this well written/up to date guide
things went smooth until the wire trick, tried like 5 times and kept sober!
funny thing in the warning it said may fry sd card, so hell i had an old 128mb sd
from like 8 years ago that i have no problem throwing away. guess i need to use a
bigger card! swapped to a 4gb class 2 (next worse card i own)
worked perfect the first time! maybe add a note with the smallest amount of space
required on card (almost 100% certain the card was to blame as i didnt do anything different)
thanks again for the tut, and thanks to the unlimited.IO team, Fuses and hyuh, WeekendsR2Short and whomever else helped!
*side note, flash crashed at the very moment the phone rebooted after the successful wire trick... strange
 
  • Like
Reactions: jjbz

jjbz

Senior Member
Jun 14, 2012
69
56
NJ
had to thank you for this well written/up to date guide
things went smooth until the wire trick, tried like 5 times and kept sober!
funny thing in the warning it said may fry sd card, so hell i had an old 128mb sd
from like 8 years ago that i have no problem throwing away. guess i need to use a
bigger card! swapped to a 4gb class 2 (next worse card i own)
worked perfect the first time! maybe add a note with the smallest amount of space
required on card (almost 100% certain the card was to blame as i didnt do anything different)
thanks again for the tut, and thanks to the unlimited.IO team, Fuses and hyuh, WeekendsR2Short and whomever else helped!
*side note, flash crashed at the very moment the phone rebooted after the successful wire trick... strange

I'm glad the guide helped you get root and JB S-OFF. As for the minimum SD card size, I'm not sure why your 128mb card didn't work for the wire trick.

It probably has more to do with the way a card is partitioned (FAT32, NTFS, etc.) rather than size. I'll add a note about the SD card partition to the guide for anyone else that may encounter the same issue.

Now that you're S-OFF, enjoy flashing all the awesome ROMs from the Dev section!
 
  • Like
Reactions: demkantor

Top Liked Posts

  • There are no posts matching your filters.
  • 31
    *****
    EDIT: PLEASE READ!!!!!!! Before proceeding, you need to find out which hboot your device has and if your device is S-ON or S-OFF. Ensure that Settings>Power>Fast Boot is unchecked and power down your device. Once your device is powered down, hold Power+Volume Down until you reach the bootloader screen.

    On the second line, it should say "DOUBLESHOT PVT SHIP S-ON" or "DOUBLESHOT PVT SHIP S-OFF." If you are already S-OFF, great! You can flash a custom recovery in step 5 of this guide (although you need to have ADB/Fastboot installed on your Windows PC).

    Your device is most likely S-ON. If so, continue reading. On the third line, your hboot information should be listed. If you have HBOOT-1.45.0013, you have the newer hboot and can follow this entire guide to achieve root. Most newer devices have HBOOT-1.45.0013.

    If by chance you have the older HBOOT-1.44.0007, you have two options for rooting your device:

    1. Use Revolutionary.io to gain S-OFF on your device. After using Revolutionary to achieve S-OFF, you can install adb/fastboot on your computer (in case you haven't done so already) and continue from step 5 of this guide to flash a custom recovery and Superuser for root,

    OR

    2. Update to latest OTA release and use this guide from beginning to end. You can update to the latest OTA release by going to Settings>About Phone or by using Blue6IX’s post “How-To: Restore to Stock.” Either method will update you to the latest OTA release (1.63.531.2) and HBOOT-1.45.0013.

    IMPORTANT NOTE: If you update to latest OTA release with HBOOT-1.45.0013, you will NOT be able to revert back to the older hboot and S-OFF unless you use JuopunutBear to S-OFF. This involves a "wire trick" that some people are not comfortable with.

    Many users have successfully achieved S-OFF with JuopunutBear (including me), but others have reported that it bricked their phone. This is usually because they do not follow the directions that say not to touch the bare wire. Check out the JB S-OFF threads here and here for other users’ experiences.

    Confused about S-ON vs S-OFF? S-ON, Revolutionary S-OFF, and JuopunutBear S-OFF are described in detail here.

    Revolutionary S-OFF is for HBOOT-1.44.0007. JuopunutBear S-OFF is for HBOOT-1.45.0013. Got it? Good.
    *****





    This is a step-by-step guide for rooting the MT4GS, designed specifically for new users (aka NOOBS), by a noob. The process is slightly more complicated than rooting other devices (i.e. Samsung), but it is well worth it.

    The MT4GS is one of the best qwerty phones on the market and has some of the best developers. Don’t let the process discourage or intimidate you. Just FOLLOW EACH STEP IN SEQUENTIAL ORDER and you’ll be fine.

    Here’s a breakdown of the process:
    1. INSTALL HTC DRIVERS ON YOUR PC.
    2. INSTALL ADB AND FASTBOOT ON YOUR PC.
    3. REGISTER AT HTC DEV.
    4. UNLOCK BOOTLOADER THROUGH HTC DEV.
    5. INSTALL A CUSTOM RECOVERY.
    6. ROOT YOUR DEVICE.
    7. USE JUOPUNUTBEAR TO GAIN S-OFF (OPTIONAL).


    -PREREQUISITES-
    Before getting started, please visit the MT4GS Compendium and read over Section One to learn the XDA Lingo. You really need to know this stuff if you’re going to tinker with the MT4GS.

    Also, all information in the guide assumes you are using a Windows PC and a MT4GS with the STOCK ROM AND HBOOT-1.45.0013. If you are not on the Stock ROM, please use Blue6IX’s post “How-To: Restore to Stock.” Be sure to use the latest OTA (1.63.531.2). Once you're all set, let’s begin, shall we?

    Disclaimer: I am not responsible for anything that happens to your phone. You assume all risks associated with modifying your phone.


    -1. INSTALL HTC DRIVERS ON YOUR PC.-
    Install the HTC Drivers on your PC from here.

    Before connecting your phone, make sure USB Debugging is enabled (Settings>Applications>Development>USB Debugging).

    Tip: to save time later, turn off your phone, hold down Power & Volume Down simultaneously until you reach the bootloader. Use the volume buttons to navigate to FASTBOOT and select it with the power button. Connect your phone via USB and the bootloader should now say FASTBOOT USB mode. Allow your PC to install the required drivers automatically. It may take a few minutes for your PC to search for and install drivers, so be patient.


    -2. INSTALL ADB AND FASTBOOT ON YOUR PC.-
    Installing ADB and fastboot on your PC is easy. Follow this guide and you’re good to go. To confirm that you have successfully installed ADB and fastboot, connect phone (with USB Debugging enabled) to PC via USB, open command prompt, and type “adb devices”. Your device ID number should be listed. Here are some useful commands for ADB and fastboot.


    -3. REGISTER AT HTC DEV.-
    Self-explanatory. Visit HTCDev.com and sign up with a valid e-mail address, as you’ll be receiving your Unlock_code.bin from HTC through this e-mail. Use an alternate browser such as IE, Google Chrome, or Mozilla Firefox if HTC Dev doesn’t play nice with your current browser of choice. Personally, I had to switch between Chrome and Firefox to get the HTC Dev website to cooperate.


    -4. UNLOCK BOOTLOADER THROUGH HTC DEV.-
    Make sure you’re logged in to HTC Dev and follow on-screen instructions to unlock bootloader. FYI, our device is listed as “myTouch 4G Slide (T-Mobile US)”. You can skip HTC’s instructions until step 5 since they're just telling you how to install ADB and fastboot, but you should already have ADB and fastboot installed :D.

    After you finish unlocking the bootloader, the first line in your bootloader should read “*** UNLOCKED ***”.


    -5. INSTALL A CUSTOM RECOVERY.-
    Download official ClockworkMod Recovery 5.0.2.7 from the ROM Manager website or download another custom recovery from the MT4GS Development section. For instruction purposes, I will assume that you use official CWM Recovery 5.0.2.7. Save the img file to C:\.

    Put your phone in bootloader FASTBOOT mode and connect to PC. Go to command prompt on PC and type “fastboot devices”. Once your device ID is listed, type “cd\” to get to “C:\” directory. Then type “fastboot flash recovery recovery-clockwork-5.0.2.7-doubleshot.img”.

    After fastboot finishes, disconnect your MT4GS, go into bootloader, and go to “RECOVERY.” You should now be in ClockworkMod Recovery 5.0.2.7. The first thing I would do in CWM Recovery is make a backup of your stock ROM for safe keeping.

    NOTE: Use volume buttons or trackpad to navigate through CWM Recovery 5.0.2.7. Select items by pressing the trackball. Power button may make your screen go blank and Back button returns you to the previous menu.


    -6. ROOT YOUR DEVICE.-
    Now that you have a custom recovery, you can flash custom ROMs. These custom ROMs are already rooted with Superuser and binary files.

    NOTE: If you are S-ON, installing a custom ICS ROM will require an extra step in fastboot. You will have to extract the “boot.img” from the ROM and flash it with fastboot after installing the ROM in CWM recovery. More information from Limewirelord.

    HOWEVER, if you want to root the STOCK ROM and/or continue to step 7 to achieve JuopunutBear S-OFF, you’ll have to root the device yourself. This is very simple. Download Superuser ZIP from androidsu.com/superuser. I can only recommend version 3.0.7 efgh because that is the only one I have tested, but newer versions may work.

    Place the “Superuser-3.0.7-efgh-signed” on the ROOT of your SD card. Go to CWM Recovery and use “install zip from sdcard” to flash the Superuser zip. If installation aborts or fails the first time, try to flash the zip again until installation is complete. Reboot your phone and check in your apps to see if Superuser app is there. If so, congratulations, you have successfully rooted your stock MT4GS!


    -7. USE JUOPUNUTBEAR TO GAIN S-OFF (OPTIONAL).-
    Achieving S-OFF will make your life a lot easier if you want to flash custom ROMs, especially ICS ROMs. Follow instructions for JuopunutBear at unlimited.io and check out the JB S-OFF thread for other users’ experiences.

    As I said before, if you are S-ON, flashing ICS ROMs will require an extra step in fastboot. You will have to extract the “boot.img” from the ROM and flash it with fastboot after installing the ROM in CWM recovery. More information from Limewirelord.

    If you are S-OFF, you can bypass this step. For this reason alone, I highly recommend JB S-OFF if you have a half hour to spare and some courage for the wire trick. In this post, Indirect explains why JB S-OFF is superior to S-ON and Revolutionary S-OFF. Also, S-ON Unlocked, Revolutionary S-OFF, and JuopunutBear S-OFF are described in detail here.

    However, if you plan on staying on stock-based/Gingerbread ROMs, S-OFF may be unnecessary for you. There are pros and cons to staying on 2.3 Gingerbread vs. upgrading to 4.0 ICS (like the stock HTC camera), but I’ll let you make that decision for yourself.

    JB S-OFF NOTE: Users have reported that certain SD cards prevent JB S-OFF from working properly. If the wire trick doesn't work for you, try using another SD card and make sure it's formatted to a "FAT" file system and over 512mb in size (thanks to demkantor for this tip).

    /ENDGUIDE





    Hopefully this guide has helped you in some way. XDA has helped me out a lot and I simply wanted to contribute to the community that has given me so much. Feel free to share this guide with noobs in case they have questions about rooting their device (for the millionth time).

    It is my hope that this guide aids in answering MOST noob root/modding/”this ROM broke my phone” questions. Noobs, please use the search function and many of the resources at your disposal BEFORE posting another thread. Everyone is here to help, so do your best not to annoy the MT4GS devs and vets.

    We all were or still are noobs, so we understand your plight. However, we have seen WAYYYY too many threads that ask the same question over and over. Please consider the devs and XDAers that help you for free. Use the search function and remember to hit the “thanks” button. Thank you!

    /ENDPSA





    P.S. Shout out to the awesome MT4GS devs and contributors. You guys rock!
    -Blue6IX
    -tbalden
    -kornyone
    -xmc wildchild22
    -strapped365
    -sun_dream
    -Riyal
    -WeekendsR2Short
    -anyone else I forgot, you go here!


    P.P.S. If any links are broken, click on WeekendsR2Short's name above for alternative mirrors. Be sure to press the 'Thanks' button for him!

    P.P.P.S. Thanks to ac3theone for this tip. If you begin experiencing an intermittent data issue on any ICS ROM (where your data turns on and off rapidly with a the 'H', '3G,' or data symbol flashing), try going to CWM Recovery and doing a wipe cache/dalvik and FIX PERMISSIONS. Hopefully this solves your intermittent data issue. This issue is ICS specific, so flashing back to a stock-based Gingerbread ROM should also fix the problem.
    2
    Thank you for this guide.
    I already had my MT4GS unlocked, but now I have just follow it to root it and it all worked.
    Thanks again!




    Please fix this:

    *****
    -1. INSTALL HTC DRIVERS ON YOUR PC.-

    Before connecting your phone, make sure USB Debugging is enabled (Settings>Development>USB Debugging).

    It is under Settings>Applications>Development>USB Debugging - not a big problem, but a noob like me had to check each and every option in Settings to find that darn "Development" ;)
    2
    thanks! its fat32 just like all my cards... i noticed running controlbear.exe after the backup was made it put something on the card (beer?) but i never checked to see how much space that took. my guess is whatever it was using the sdcard for needed more than 128mb of space. either way i doubt many people even have a card that small so probably will never come up again.
    forgot to mentioned i stripped an old coaxial cable and used about a one foot length of it to perform the "wire trick" the guide doesnt specify too much of the gauge or length but mentioned this. it worked great!
    2
    HTCDev factory resets your phone no matter what. You need to do it in order to get CWM on your phone.

    If you absolutely need to backup stuff that isn't on your SD card, look into finding an app that can do a backup without root (i.e My Backup). I can't personally recommend one because I've never used one.

    Once you're rooted, you can use CWM and a good backup app like Titanium Backup (paid version is definitely worth it).
    1
    hopefull we get this sticky'd so that we gett less questions how to root. Nice guide tho