This hasn't worked for me. It bricked my phone even further. The MTK Bypass bricked my phone and my pc and other pc can't detect my phone now :l
Did you solve it? If yes, how?hello sir so i recently hard bricked my redmi 9c nfc by installing older MIUI version that it came with. It was just black screen all the time and nothing. Tried this guide, mtk bypass tool worked but on sp flash tools i am greeted with this message.View attachment 5638127
Thanks for replying, I did it before with other MTK devices, but this time, I can´t bypass this, I also had other message from SPFT, somthing like EXT_RAM_EXCEPTION, even I opened the back cover, so affordably can connect and disconnect the battery. Strange, but when it was detected like, MediaTek USB port, not like Preloader, it did start to flash.
It successfully flashes but when i reconnect the battery it does not boot.This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT.
If you can boot into Fastboot mode then I would encourage you to flash using Mi Flash tool.
Original video credits: Om Bob Ombreker
MTK Bypass Tool
SP Flash Tools
Fastboot ROM ( Around 3GB Download)
PC and USB cable
Download files here:
This blog has move and will not be update again.For new update please open ▶▶langithitam.wordpress.com
First you need to extract the MTK bypass tool which is crucial as it will allow us to flash without requiring Auth file. NOTE: you need to disable antivirus or it will delete file.
Your PHONE NEEDS TO BE OFF! There is no need to unplug battery from the phone, I tested it myself and as long as the phone is OFF it'll still work. If your phone cannot power down due to bootloop, then you must remove backcover and unplug battery or just wait till battery runs out.
Once you have started the MTK bypass tool, choose MTK6765 from option that says auto and this is only for Redmi 9C. Now press on the bypass button a ad it will wait for you to connect your phone via USB. DO NOT CONNECT YOUR PHONE PRIOR TO THIS. Hold only the VOLUME UP button when connecting the USB cable to your phone and ensure the phone is OFF. ONCE you connect the phone, it will immediately respond and show a log saying its completed (SEE SCREENSHOT BELOW).
Once this step is completed leave your phone connected as you will soon start the flashing process. Open up SP FLASH TOOLS and run as admin. You will need to load the scatter file which is included in the Fastboot ROM under images folder. Once you have the scatter file loaded, SP tools will proceed to load all image files which will be used to flash phone so be patient.
Ensure that DOWNLOAD ONLY option is chosen as format and download option will format your IMEI also. Once all files have been loaded then just press the DOOWNLOAD button and wait to complete. Once done you can power ON the phone and it should boot.
What special did you do to get device detected by TFT, I tried with or without battery, doing o nor the bypass, and I couldn´t
by the way... i used the mtk bypass rev 4. and i noticed it is not recognised until mtk bypass says protection disabled
Now, more confused, then it didn´t work, but how did you flash through it?