There doesn't seem to be a comprehensive guide on this, so I thought I would provide one.
READ THIS FIRST
DO NOT TAKE ANY OTA UPDATES!!!
Please consider the following:
Still here? Cool.
Section 0: Installing Firmware Version MCG24.251-5
1. Go to Settings -> About phone -> Build number. If it says SU4TL-44, SU4TL-49 or MCG24.251-5, skip to section 1 of this guide. If it says MCG24.251-5-5, you need to take an extra step to unlock your bootloader. I'll explain later. For now, just skip to section 1 of this guide. If it says anything else, keep reading.
Flashing MCG24.251-5 using this method will erase all of your data. Back up any important files/information before proceeding.
2. Download and install Minimal ADB and Fastboot from here: http://forum.xda-developers.com/showthread.php?t=2317790.
3. Download and install the Motorola Device Manager from here: https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
4. Download the MCG24.251-5 firmware package from here: https://www.androidfilehost.com/?fid=889764386195901169
5. Extract the contents of the MCG24.251-5 firmware package to the installation directory of Minimal ADB and Fastboot (C:\Program Files (x86)\Minimal ADB and Fastboot on any 64-bit installation of Windows).
6. Power off your phone.
7. Hold down the volume down button and power on your phone. Release the volume down button when you see that the phone has booted into bootloader mode. You'll see a dead green android.
8. Plug the phone into your computer.
9. Open the Minimal ADB and Fastboot shortcut on your desktop. This will open a command prompt.
10. Type "fastboot devices" and press enter. If it displays your device's serial number, you're ready to go. If it displays nothing, your computer is not recognizing your device properly.
11. Navigate to the installation directory of Minimal ADB and Fastboot and double click on FlashAll.bat. This will flash MCG24.251-5 to your device and erase all of your data.
12. Use the power button to select Start in the bootloader menu to boot normally.
13. Set up your phone at least to the point where you can install apps if you want to.
For now, just try to ask someone nicely to help you out with this. I'll try to get this done before the end of the day.
Section 1: Unlocking the Bootloader
1. Download Sunshine from here: http://theroot.ninja/download.html
2. Move the apk file to a convenient location on your phone. If you downloaded it with your phone, it's in your downloads folder already, so leave it there.
3. Use any file browser on your phone to navigate to the folder that contains the Sunshine apk file. Tap on it to install it.
4. If a message comes up and says that you need to enable installation of apps from unknown sources, follow the instructions on that message to enable it.
5. Enable Wi-Fi on your phone if it is disabled. Even if you aren't connected to a Wi-Fi network, it still needs to be on.
6. !!!DO THIS STEP ONLY IF YOU'RE ON MCG24.251-5-5!!! Follow the instructions here to obtain temporary root: https://forum.xda-developers.com/g4-play/development/root-autoinitroot-motorola-bootloader-t3639316/. DO NOT perform the uninstall step.
7. Open your app drawer and start Sunshine.
8. Follow the instructions.
9. !!!FOR MCG24.251-5-5 ONLY!!! Sunshine will reboot your phone automatically, and it will go into a bootloop. This is normal. Don't panic. Hold down the volume down button until the phone goes into bootloader mode. Plug your phone into the computer, start Minimal ADB and Fastboot (see Section 0 for link if you didn't have to install it before this point), and enter the command fastboot oem config fsg-id "". This will disable the temporary root exploit. Reboot your phone normally, and everything should be happy again.
10. If, when your phone reboots, you see a "Warning: The bootloader is unlocked" message, you have successfully unlocked your bootloader. If you do not see this message, open Sunshine again and follow the directions again. If you're on MCG24.251-5-5, you'll have to gain and uninstall temproot again at the appropriate times.
Section 2: Installing TWRP
Team Win Recovery Project is arguably the most important tool to have on a bootloader-unlocked phone. This is how you install it:
1. Download and install Minimal ADB and Fastboot from here: http://forum.xda-developers.com/showthread.php?t=2317790. If you already did this in section 0, you don't have to do it again.
2. Download the latest TWRP .img file from here: https://www.androidfilehost.com/?w=files&flid=39562
NOTE: The TWRP file that you download should have a .img extension. Make sure you can see this. If you don't see .img at the end of the filename, Google how to make file extensions visible on your version of Windows and do it. If you do not do this, you may run into trouble later.
3. Download and install the Motorola Device Manager from here: https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481. If you already did this in section 0, you don't have to do it again.
3. Rename the file that you downloaded in step 2 to TWRP.img
4. Copy TWRP.img to the directory that you installed Minimal ADB and Fastboot to. The default location on an installation of 64-bit Windows is C:\Program Files (x86)\Minimal ADB and Fastboot.
5. Turn off your phone.
6. Hold the volume down button and press the power button to boot into bootloader mode. You should see a green android lying on his back with his chest open, and some information about your phone. Poor little guy...
7. Plug your phone into your PC.
8. Double click on the Minimal ADB and Fastboot shortcut that's on your desktop. It will open a command prompt.
9. Type "fastboot devices" without quotes and press enter. If it gives you your phone's serial number, you're good to go. If it gives you nothing, your device is not detected. This can happen for several reasons, and I won't discuss them here. However, if you followed these directions and all of your hardware is functioning properly, you should be good to go.
10. Type "fastboot flash recovery TWRP.img" without quotes and press enter. It should tell you that the flash was successful. You might see some "not found" errors. These are normal and can be ignored.
11. Highlight "Recovery mode" on your phone using the volume up and down buttons.
12. Press the power button to boot into TWRP.
13. TWRP will boot, and it will ask you if you want to allow write access to the system partition. IT IS VERY IMPORTANT THAT YOU ALLOW THIS. Check the box that says to never ask this question again.
14. Select Reboot, followed by System to boot the phone normally.
Section 3: Gaining Root Access
If you intend to install a custom rom, these steps are not necessary. Custom roms almost always come with root access built in. Refer to the thread of your custom rom of choice for installation instructions.
If you do not want a custom rom, and you simply want root access on the stock Droid Turbo rom, continue reading.
1. If you are on the stock marshmallow rom, build MCG24.251-5 or higher, download the latest version of both Magisk and Magisk Manager to your phone: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445.
NOTE: You need to be on marshmallow to use Magisk to root your phone. The Magisk thread says it supports lollipop and higher, but it only supports lollipop for some stock Samsung roms. This does not apply to you. If you want to root your phone on lollipop, you'll need to use SuperSU. I won't go into that here because I don't think there is a lot of demand for it, but if you need help with that, reach out to someone here. It's not difficult.
2. Install Magisk Manager the same way you installed Sunshine.
3. Turn off your phone.
4. Hold the volume down button and press the power button to boot into bootloader mode. You should see a green android lying on his back with his chest open, and some information about your phone. Andy, what have they done to you?
5. Use the volume up and down buttons to highlight "Recovery mode."
6. Press the power button to select Recovery mode.
7. Select Install from the TWRP main menu.
8. Select the most recent version of Magisk (the .zip file, NOT the Magisk Manager .apk file) that you downloaded.
9. Swipe the bar at the bottom of the screen to flash this zip file.
10. When it finishes, select Wipe Cache/Dalvik and swipe the bar at the bottom of the screen.
11. Select Reboot System
Section 4: Passing Safetynet using Stock, Unrooted Marshmallow
If you are running stock marshmallow with an unlocked bootloader, you will fail safetynet verification (and be unable to use Android Pay). Installing Magisk is the only recommended method, as of this writing, to bypass this limitation. If you completed Section 3, you shouldn't have any trouble. Understand, however, that there is a constant game of cat and mouse going on between Google and Magisk's developer, so sometimes Google will update safetynet to beat Magisk. If that happens, wait for Magisk Manager to tell you that a new version of Magisk is available, and it will install the new version for you. That's your best bet for passing safetynet again.
If you really want to pass safetynet, but you really don't want to be rooted, you can disable root (Superuser access) in the Magisk Manager settings.
Section 5: Miscellaneous
Here are some links to stuff you can flash now that your bootloader is unlocked:
Official LineageOS 12.1 (Android 5.1.1): http://forum.xda-developers.com/dro.../moto-maxx-xt1225-droid-turbo-xt1254-t3260253
Official LineageOS 13.0 (Android 6.0.1): http://forum.xda-developers.com/dro.../moto-maxx-xt1225-droid-turbo-xt1254-t3353298
AOSPExtended (Android 7.X): https://forum.xda-developers.com/moto-maxx/general/rom-aospextended-rom-v3-1-t3555361
Unofficial LineageOS 14.1 (Android 7.X): http://forum.xda-developers.com/moto-maxx/development/rom-t3494646
crDroid (Android 7.X): http://forum.xda-developers.com/moto-maxx/development/rom-crdroid-android-t3491257
Android Open Kang Project (Android 7.X): http://forum.xda-developers.com/droid-turbo/development/rom-aokp-7-x-quark-t3504629
Resurrection Remix (a great LineageOS-based rom, Android 5.1.1): http://forum.xda-developers.com/moto-maxx/development/rom-resurrection-remix-5-5-5-t3197643
Resurrection Remix (Android 6.0.1): http://forum.xda-developers.com/moto-maxx/development/rom-resurrection-remix-t3316232
Resurrection Remix (Android 7.X): https://forum.xda-developers.com/moto-maxx/development/rom-resurrection-remix-t3511109
Computerfreek274's optimized stock rom (Android 6.0.1): http://forum.xda-developers.com/droid-turbo/development/computerfreekunlocked1-0-t3255945
MoKee Open Source Project (Android 6.0.1): http://forum.xda-developers.com/moto-maxx/development/rom-mokee-opensource-project-t3188936
Bliss Rom (Android 6.0.1): http://forum.xda-developers.com/droid-turbo/development/rom-bliss-rom-6-4-team-bliss-t3422937
Android Open Kang Project (Android 6.0.1): http://forum.xda-developers.com/droid-turbo/development/rom-android-kang-project-t3422456
Android Open Kang Project (Android 7.X): https://forum.xda-developers.com/droid-turbo/development/rom-aokp-7-x-quark-t3504629
Change the splash screen (the bootloader unlocked warning message) that you see when you first start your phone: http://forum.xda-developers.com/dro...custom-boot-logos-accepting-requests-t3262873
Xposed framework and installer (make sure to use the sdk22-arm version if you're running a lollipop rom, sdk23-arm if you're running marshmallow. Not available for nougat yet.): http://forum.xda-developers.com/showthread.php?t=3034811
Alternative Material Design Xposed Installer that provides additional features: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
Pon-3 Audio Mod (modified and improved Viper4Android. It makes your phone sound better.): http://forum.xda-developers.com/showthread.php?t=2530976
Other modded Viper4Android versions that are better than PON-3: http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Theme your TWRP with different colors: http://forum.xda-developers.com/android/themes/theme-twrp-3-0-0-0-dark-stock-colors-t3310235
More TWRP themes: http://forum.xda-developers.com/showpost.php?p=66276401&postcount=2889
Android N Emojis: http://android.wonderhowto.com/how-to/get-android-nougats-all-new-emojis-right-now-0170328/
Section 6: Troubleshooting
Issue: When you try to boot TWRP, you see a screen that says "no command." TWRP does not boot.
Solution: The screen you are seeing is the stock Droid Turbo recovery menu (the menu that you're trying to replace with TWRP). If you see this after flashing TWRP, one of two things happened:
-You did not boot into the recovery menu immediately after flashing TWRP, and it was therefore replaced by the stock recovery menu.
-When you flashed TWRP, the process did not complete successfully.
The solution to both of these problems is to repeat section 2 and follow the instructions more carefully.
Issue: When TWRP asked you if you wanted to allow write access to the system partition, you selected no. Now you cannot flash anything.
Solution: At the main TWRP menu, select Mount. Uncheck the box that says "Mount system partition as read-only."
Issue: Fastboot says "cannot load TWRP.img" when you try to flash it.
Solution: This error indicates that Fastboot cannot find TWRP.img. The most common source of this problem is that you did not make your file extensions visible, and so when you renamed the TWRP file to TWRP.img, you actually renamed it to TWRP.img.img (including the hidden .img file extension that you didn't realize was there). Google how to enable file extensions on your version of Windows, follow those instructions, and if this is the issue you will see it.
READ THIS FIRST
DO NOT TAKE ANY OTA UPDATES!!!
Please consider the following:
- Ask yourself these two questions: "Why do I want to unlock my bootloader? Why do I need root access?" If the answer to either one of those is "I don't know," don't do it. Both of these actions weaken the security of your phone, and there's no reason to do that if you're not sure why.
- This guide is for the Droid Turbo, model XT1254. It is not for the Droid Turbo 2, and it is not for any phone that is not named Droid Turbo.
- Standard XDA rules apply. I'm not responsible for anything you do, and neither is anyone else other than you.
- I'm assuming that you are running a Windows PC. If you have a Mac, I can't help you. If you're running Linux, you shouldn't need help.
- This method is not free. It costs $25 (USD). If that's not okay with you, don't do this.
- Once your bootloader is unlocked, you CANNOT safely re-lock and unlock it again. See this thread for what happens when you try to do that: http://forum.xda-developers.com/droid-turbo/help/relocked-bootloader-bricked-t3306081#post65095391
Still here? Cool.
Section 0: Installing Firmware Version MCG24.251-5
1. Go to Settings -> About phone -> Build number. If it says SU4TL-44, SU4TL-49 or MCG24.251-5, skip to section 1 of this guide. If it says MCG24.251-5-5, you need to take an extra step to unlock your bootloader. I'll explain later. For now, just skip to section 1 of this guide. If it says anything else, keep reading.
Flashing MCG24.251-5 using this method will erase all of your data. Back up any important files/information before proceeding.
2. Download and install Minimal ADB and Fastboot from here: http://forum.xda-developers.com/showthread.php?t=2317790.
3. Download and install the Motorola Device Manager from here: https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
4. Download the MCG24.251-5 firmware package from here: https://www.androidfilehost.com/?fid=889764386195901169
5. Extract the contents of the MCG24.251-5 firmware package to the installation directory of Minimal ADB and Fastboot (C:\Program Files (x86)\Minimal ADB and Fastboot on any 64-bit installation of Windows).
6. Power off your phone.
7. Hold down the volume down button and power on your phone. Release the volume down button when you see that the phone has booted into bootloader mode. You'll see a dead green android.
8. Plug the phone into your computer.
9. Open the Minimal ADB and Fastboot shortcut on your desktop. This will open a command prompt.
10. Type "fastboot devices" and press enter. If it displays your device's serial number, you're ready to go. If it displays nothing, your computer is not recognizing your device properly.
11. Navigate to the installation directory of Minimal ADB and Fastboot and double click on FlashAll.bat. This will flash MCG24.251-5 to your device and erase all of your data.
12. Use the power button to select Start in the bootloader menu to boot normally.
13. Set up your phone at least to the point where you can install apps if you want to.
For now, just try to ask someone nicely to help you out with this. I'll try to get this done before the end of the day.
Section 1: Unlocking the Bootloader
1. Download Sunshine from here: http://theroot.ninja/download.html
2. Move the apk file to a convenient location on your phone. If you downloaded it with your phone, it's in your downloads folder already, so leave it there.
3. Use any file browser on your phone to navigate to the folder that contains the Sunshine apk file. Tap on it to install it.
4. If a message comes up and says that you need to enable installation of apps from unknown sources, follow the instructions on that message to enable it.
5. Enable Wi-Fi on your phone if it is disabled. Even if you aren't connected to a Wi-Fi network, it still needs to be on.
6. !!!DO THIS STEP ONLY IF YOU'RE ON MCG24.251-5-5!!! Follow the instructions here to obtain temporary root: https://forum.xda-developers.com/g4-play/development/root-autoinitroot-motorola-bootloader-t3639316/. DO NOT perform the uninstall step.
7. Open your app drawer and start Sunshine.
8. Follow the instructions.
9. !!!FOR MCG24.251-5-5 ONLY!!! Sunshine will reboot your phone automatically, and it will go into a bootloop. This is normal. Don't panic. Hold down the volume down button until the phone goes into bootloader mode. Plug your phone into the computer, start Minimal ADB and Fastboot (see Section 0 for link if you didn't have to install it before this point), and enter the command fastboot oem config fsg-id "". This will disable the temporary root exploit. Reboot your phone normally, and everything should be happy again.
10. If, when your phone reboots, you see a "Warning: The bootloader is unlocked" message, you have successfully unlocked your bootloader. If you do not see this message, open Sunshine again and follow the directions again. If you're on MCG24.251-5-5, you'll have to gain and uninstall temproot again at the appropriate times.
Section 2: Installing TWRP
Team Win Recovery Project is arguably the most important tool to have on a bootloader-unlocked phone. This is how you install it:
1. Download and install Minimal ADB and Fastboot from here: http://forum.xda-developers.com/showthread.php?t=2317790. If you already did this in section 0, you don't have to do it again.
2. Download the latest TWRP .img file from here: https://www.androidfilehost.com/?w=files&flid=39562
NOTE: The TWRP file that you download should have a .img extension. Make sure you can see this. If you don't see .img at the end of the filename, Google how to make file extensions visible on your version of Windows and do it. If you do not do this, you may run into trouble later.
3. Download and install the Motorola Device Manager from here: https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481. If you already did this in section 0, you don't have to do it again.
3. Rename the file that you downloaded in step 2 to TWRP.img
4. Copy TWRP.img to the directory that you installed Minimal ADB and Fastboot to. The default location on an installation of 64-bit Windows is C:\Program Files (x86)\Minimal ADB and Fastboot.
5. Turn off your phone.
6. Hold the volume down button and press the power button to boot into bootloader mode. You should see a green android lying on his back with his chest open, and some information about your phone. Poor little guy...
7. Plug your phone into your PC.
8. Double click on the Minimal ADB and Fastboot shortcut that's on your desktop. It will open a command prompt.
9. Type "fastboot devices" without quotes and press enter. If it gives you your phone's serial number, you're good to go. If it gives you nothing, your device is not detected. This can happen for several reasons, and I won't discuss them here. However, if you followed these directions and all of your hardware is functioning properly, you should be good to go.
10. Type "fastboot flash recovery TWRP.img" without quotes and press enter. It should tell you that the flash was successful. You might see some "not found" errors. These are normal and can be ignored.
11. Highlight "Recovery mode" on your phone using the volume up and down buttons.
12. Press the power button to boot into TWRP.
13. TWRP will boot, and it will ask you if you want to allow write access to the system partition. IT IS VERY IMPORTANT THAT YOU ALLOW THIS. Check the box that says to never ask this question again.
14. Select Reboot, followed by System to boot the phone normally.
Section 3: Gaining Root Access
If you intend to install a custom rom, these steps are not necessary. Custom roms almost always come with root access built in. Refer to the thread of your custom rom of choice for installation instructions.
If you do not want a custom rom, and you simply want root access on the stock Droid Turbo rom, continue reading.
1. If you are on the stock marshmallow rom, build MCG24.251-5 or higher, download the latest version of both Magisk and Magisk Manager to your phone: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445.
NOTE: You need to be on marshmallow to use Magisk to root your phone. The Magisk thread says it supports lollipop and higher, but it only supports lollipop for some stock Samsung roms. This does not apply to you. If you want to root your phone on lollipop, you'll need to use SuperSU. I won't go into that here because I don't think there is a lot of demand for it, but if you need help with that, reach out to someone here. It's not difficult.
2. Install Magisk Manager the same way you installed Sunshine.
3. Turn off your phone.
4. Hold the volume down button and press the power button to boot into bootloader mode. You should see a green android lying on his back with his chest open, and some information about your phone. Andy, what have they done to you?
5. Use the volume up and down buttons to highlight "Recovery mode."
6. Press the power button to select Recovery mode.
7. Select Install from the TWRP main menu.
8. Select the most recent version of Magisk (the .zip file, NOT the Magisk Manager .apk file) that you downloaded.
9. Swipe the bar at the bottom of the screen to flash this zip file.
10. When it finishes, select Wipe Cache/Dalvik and swipe the bar at the bottom of the screen.
11. Select Reboot System
Section 4: Passing Safetynet using Stock, Unrooted Marshmallow
If you are running stock marshmallow with an unlocked bootloader, you will fail safetynet verification (and be unable to use Android Pay). Installing Magisk is the only recommended method, as of this writing, to bypass this limitation. If you completed Section 3, you shouldn't have any trouble. Understand, however, that there is a constant game of cat and mouse going on between Google and Magisk's developer, so sometimes Google will update safetynet to beat Magisk. If that happens, wait for Magisk Manager to tell you that a new version of Magisk is available, and it will install the new version for you. That's your best bet for passing safetynet again.
If you really want to pass safetynet, but you really don't want to be rooted, you can disable root (Superuser access) in the Magisk Manager settings.
Section 5: Miscellaneous
Here are some links to stuff you can flash now that your bootloader is unlocked:
Official LineageOS 12.1 (Android 5.1.1): http://forum.xda-developers.com/dro.../moto-maxx-xt1225-droid-turbo-xt1254-t3260253
Official LineageOS 13.0 (Android 6.0.1): http://forum.xda-developers.com/dro.../moto-maxx-xt1225-droid-turbo-xt1254-t3353298
AOSPExtended (Android 7.X): https://forum.xda-developers.com/moto-maxx/general/rom-aospextended-rom-v3-1-t3555361
Unofficial LineageOS 14.1 (Android 7.X): http://forum.xda-developers.com/moto-maxx/development/rom-t3494646
crDroid (Android 7.X): http://forum.xda-developers.com/moto-maxx/development/rom-crdroid-android-t3491257
Android Open Kang Project (Android 7.X): http://forum.xda-developers.com/droid-turbo/development/rom-aokp-7-x-quark-t3504629
Resurrection Remix (a great LineageOS-based rom, Android 5.1.1): http://forum.xda-developers.com/moto-maxx/development/rom-resurrection-remix-5-5-5-t3197643
Resurrection Remix (Android 6.0.1): http://forum.xda-developers.com/moto-maxx/development/rom-resurrection-remix-t3316232
Resurrection Remix (Android 7.X): https://forum.xda-developers.com/moto-maxx/development/rom-resurrection-remix-t3511109
Computerfreek274's optimized stock rom (Android 6.0.1): http://forum.xda-developers.com/droid-turbo/development/computerfreekunlocked1-0-t3255945
MoKee Open Source Project (Android 6.0.1): http://forum.xda-developers.com/moto-maxx/development/rom-mokee-opensource-project-t3188936
Bliss Rom (Android 6.0.1): http://forum.xda-developers.com/droid-turbo/development/rom-bliss-rom-6-4-team-bliss-t3422937
Android Open Kang Project (Android 6.0.1): http://forum.xda-developers.com/droid-turbo/development/rom-android-kang-project-t3422456
Android Open Kang Project (Android 7.X): https://forum.xda-developers.com/droid-turbo/development/rom-aokp-7-x-quark-t3504629
Change the splash screen (the bootloader unlocked warning message) that you see when you first start your phone: http://forum.xda-developers.com/dro...custom-boot-logos-accepting-requests-t3262873
Xposed framework and installer (make sure to use the sdk22-arm version if you're running a lollipop rom, sdk23-arm if you're running marshmallow. Not available for nougat yet.): http://forum.xda-developers.com/showthread.php?t=3034811
Alternative Material Design Xposed Installer that provides additional features: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
Pon-3 Audio Mod (modified and improved Viper4Android. It makes your phone sound better.): http://forum.xda-developers.com/showthread.php?t=2530976
Other modded Viper4Android versions that are better than PON-3: http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Theme your TWRP with different colors: http://forum.xda-developers.com/android/themes/theme-twrp-3-0-0-0-dark-stock-colors-t3310235
More TWRP themes: http://forum.xda-developers.com/showpost.php?p=66276401&postcount=2889
Android N Emojis: http://android.wonderhowto.com/how-to/get-android-nougats-all-new-emojis-right-now-0170328/
Section 6: Troubleshooting
Issue: When you try to boot TWRP, you see a screen that says "no command." TWRP does not boot.
Solution: The screen you are seeing is the stock Droid Turbo recovery menu (the menu that you're trying to replace with TWRP). If you see this after flashing TWRP, one of two things happened:
-You did not boot into the recovery menu immediately after flashing TWRP, and it was therefore replaced by the stock recovery menu.
-When you flashed TWRP, the process did not complete successfully.
The solution to both of these problems is to repeat section 2 and follow the instructions more carefully.
Issue: When TWRP asked you if you wanted to allow write access to the system partition, you selected no. Now you cannot flash anything.
Solution: At the main TWRP menu, select Mount. Uncheck the box that says "Mount system partition as read-only."
Issue: Fastboot says "cannot load TWRP.img" when you try to flash it.
Solution: This error indicates that Fastboot cannot find TWRP.img. The most common source of this problem is that you did not make your file extensions visible, and so when you renamed the TWRP file to TWRP.img, you actually renamed it to TWRP.img.img (including the hidden .img file extension that you didn't realize was there). Google how to enable file extensions on your version of Windows, follow those instructions, and if this is the issue you will see it.
Last edited:
