[Guide] How to use latest S-Health on devices with Knox tripped (0x1)

[Matusr1]

New method for non root and s-health installed as system app:

Download App Cloner from Playstore.
Download old Samsung Health apk.
Open it in App Cloner and let it process the app.
Install the newly created apk
Done =]

If u wanna update to a newer version, download the new apk and run App Cloner again. It will tell u it has an update available for Samsung health.

Hello Aerys, do you have heart rate and profile synchonization working?
I try but hearth rate and synchonization dont work.
Thanks

 

[ushiyama]

New method for non root and s-health installed as system app:

Download App Cloner from Playstore.
Download old Samsung Health apk.
Open it in App Cloner and let it process the app.
Install the newly created apk
Done =]

If u wanna update to a newer version, download the new apk and run App Cloner again. It will tell u it has an update available for Samsung health.

Which app clone?

---------- Post added at 04:20 PM ---------- Previous post was at 04:18 PM ----------

Hey
You're right i have tested only te rooted method.
I don't know about unrooted.
I can't try it because I'm on a rooted device

Unrooted method does not work.

 

[eladkarako]

I no longer have the SPO2 measure button...

@raymonkey77 , try the XPosed module Global S Health.
https://repo.xposed.info/module/com.john.xposed.globalshealth
https://forum.xda-developers.com/xposed/modules/mod-global-s-health-enable-s-health-t2993601

 

[thebiggboss180]

can u provide me with the link for the app cloner that worked for u ?

---------- Post added at 12:36 AM ---------- Previous post was at 12:35 AM ----------

New method for non root and s-health installed as system app:

Download App Cloner from Playstore.
Download old Samsung Health apk.
Open it in App Cloner and let it process the app.
Install the newly created apk
Done =]

If u wanna update to a newer version, download the new apk and run App Cloner again. It will tell u it has an update available for Samsung health.

can u provide me with the link for the app cloner that worked for u ?

 

[Matusr1]

can u provide me with the link for the app cloner that worked for u ?

---------- Post added at 12:36 AM ---------- Previous post was at 12:35 AM ----------



can u provide me with the link for the app cloner that worked for u ?

This one work for me.
search "App Cloner 1.5.9" in google
But no heart rate and synchronization work for me.

 

[Fussionxd]

Great

Thanks...work in my S8 plus

 

[katbastard]

Worked like a charm on my N920R4

 

[darktbone]

Non-Rooted Devices

If you are not rooted and/or cannot root then you can follow the steps below to get S-Health working (this will only work if the app is not installed as a system app).

1. Uninstall the S-Health App (if you cannot uninstall the app, this means it is installed to the system partition. Try Method 2 below).
2. Install version 4 of the S-Health app which can be found HERE
3. Open the app and complete setup
4. Update the S-Health app via the app store
5. You should now be able to use the S-Health app without issue

You can now use S-Health even with tripped Knox!!

Works for me... Thank you

 

[Shariq3422]

As some of you will know, Samsung have no longer allowed S-Health to work on devices where Knox has been tripped.
This guide will show you how to get the latest version of S-Health to run without this block

Rooted Devices

This method requires you to be rooted. You can always unroot after doing this

If you are not rooted you can root your device by following the instructions below:

Download TWRP and save it somewhere you will remember.
Open ODIN and press AP then select the TWRP file you just downloaded.
Put your phone into Download Mode by holding Power + Volume Down + Home.
Connect your phone to your computer using a USB cable. Then Press Start in ODIN.
Download SuperSU-v2.79-SR3 and save it to your phone's SD Card.
Power off the phone and then hold Power + Volume Up + Home to boot to TWRP.
Press Install and locate the SuperSU file you downloaded earlier. Select it and Install.
You are now rooted.


To remove root, simple open the SuperSU app from your app drawer, go to settings and select Full Unroot

Follow the steps below to remove the S-Health block.

Download a root file explorer (such as Root Explorer, Root Browser or ES File Explorer).
Open the root file explorer and go to the /system folder.
Open the file named build.prop in text editor
In the build.prop file look for ro.config.tima=1
Change this line to ro.config.tima=0, simply changing the 1 to a 0
Reboor phone
Run the S-Health app



Non-Rooted Devices

If you are not rooted and/or cannot root then you can follow the steps below to get S-Health working (this will only work if the app is not installed as a system app).

Uninstall the S-Health App (if you cannot uninstall the app, this means it is installed to the system partition. Try Method 2 below).
Install version 4 of the S-Health app which can be found HERE
Open the app and complete setup
Update the S-Health app via the app store
You should now be able to use the S-Health app without issue




You can now use S-Health even with tripped Knox!!

Thankuu ? Using Stock Android Rom 8.0 Oreo with Root Using Magisk
I was getting Safety check false that y it was not running.. but thanks to u Pal ?

 

[EvilWayz]

This one work for me.
search "App Cloner 1.5.9" in google
But no heart rate and synchronization work for me.

So it does or doesnt? My heart rate sensor doesnt work anymore.

 

[Driler]

HELEEELP

I WAS STUPID I.. I REWRITE ro.config.tima from 0 to 1 ON SAMSUNG GALAXY S6 AND NOW MY PHONE DONT START AFTER I REBOOTED (AND YEAH HE HAVE ROOT) I TRYED EVERYTHING WIPE DATA CHACHE TWRP AND RECOVERY MODE AND NOTHING MY SCREEN WONT OPEN HELP ME FAST
PS:I WAS NOT APYNG ATTENCION TO "FOR SAMSUNG GALAXY S7" -_- BUT SERIOSLY I NEED HELP WHAT CAN I DO TO REPAIR MY PHONE

 

[Xspidera]

I WAS STUPID I.. I REWRITE ro.config.tima from 0 to 1 ON SAMSUNG GALAXY S6 AND NOW MY PHONE DONT START AFTER I REBOOTED (AND YEAH HE HAVE ROOT) I TRYED EVERYTHING WIPE DATA CHACHE TWRP AND RECOVERY MODE AND NOTHING MY SCREEN WONT OPEN HELP ME FAST
PS:I WAS NOT APYNG ATTENCION TO "FOR SAMSUNG GALAXY S7" -_- BUT SERIOSLY I NEED HELP WHAT CAN I DO TO REPAIR MY PHONE

What does the screen doesnt even turn on once ??? both in bootloader and recovery ?

 

[lucianjr]

This method is not working anymore on android 9.

 

[Jostian]

would love to get Sp02 working on my unrooted Note 9 on Pie, any ideas?

 

[Xspidera]

Works great on Rooted phone, even after factory reset. Now I can sell my phone easily if i want to :devil:

 

[Garock]

thanks
this method still works on S10 with OS Pie rooted using Magisk

 

[eagletdw]

Thanks, works with S9 (SM-G960F/DS), pie (march), rooted (magisk)

 

[Sly123]

Damn. Even on my S10 it work that way with root! Thank you so much.

 

[gupt07ash]

I WAS STUPID I.. I REWRITE ro.config.tima from 0 to 1 ON SAMSUNG GALAXY S6 AND NOW MY PHONE DONT START AFTER I REBOOTED (AND YEAH HE HAVE ROOT) I TRYED EVERYTHING WIPE DATA CHACHE TWRP AND RECOVERY MODE AND NOTHING MY SCREEN WONT OPEN HELP ME FAST
PS:I WAS NOT APYNG ATTENCION TO "FOR SAMSUNG GALAXY S7" -_- BUT SERIOSLY I NEED HELP WHAT CAN I DO TO REPAIR MY PHONE

You need to flash reflash build.prop of the rom which you were using twrp flashable zip. Wipe dalvik cache after flash and reboot. It will boot now

Sent from my Galaxy S7 Edge using XDA Labs

 

[1337-oxide]

Works great

I have samsung s7edge and i could not use samsung health so i did some research and found easier way to do this instead of using file browser just download buildprop pro from jrummy on google play then basicly find that code cange it back 2 0 i have made a turorial and will upload to YouTube later today or tomorrow thanks for help mate

---------- Post added at 04:24 PM ---------- Previous post was at 04:22 PM ----------

You need to flash reflash build.prop of the rom which you were using twrp flashable zip. Wipe dalvik cache after flash and reboot. It will boot now

Sent from my Galaxy S7 Edge using XDA Labs

Just flash with stock rom then re root that be easy way to do it might be longer way but easier for noobs to do this way then to find that pacific thing

---------- Post added at 04:26 PM ---------- Previous post was at 04:24 PM ----------

Damn. Even on my S10 it work that way with root! Thank you so much.

Untill u reflash or do restore then u be ****ed