(guide)INSTALL Andriod P PR1 on REDMI 4

[Hernandc86]

hi ... intale the image pr1 and I have a problem. the wifi only turns off every 10 to 15 minutes and I have to turn it on again. Anyone knows how to solve this? It is quite annoying. then the rest I think is good. I appreciate a help, greetings, friends.

 

[Keyursoni]

Can some one confirm everything works, camera, volte, I.E can be used as a daily driver. Have to be sure before flashing. Coz hard to fall back to non treble rom.Plz confirm. Thanks

I tested pie gsi, but according to me it isn't ready for daily driver.
It's not hard to flash non-treble rom after treblize your phone.

 

[Hernandc86]

When flashing the new LuisRom, with enforcing SELinux, rebooting the phone into recovery results in the Internal Memory shown as 0 mb. Has it happened to anyone else?

hello, it happened to me the same after installing the romis and then the pr1. I do not have a password or anything. Do you know how I can solve it?

 

[MarcosJungbluth]

They posted these fixes to the fingerprint reader in the ROM forum for the Mido, it worked perfectly here

• FPC: delete " /data/system/users/0/fpdata/user.db ", reboot required
• Goodix: delete all files in " /persist/data/gxfp/0_0/ ", reboot not needed

I have Goodix here and I have to repeat the procedure with each reboot and set up the fingerprints again, but it's better than nothing

 

[iamcaptain]

Hi

Can we imagine some "P" custom roms we could flash directly, like other oreo/nougat roms ?

Yes you can but, rom should be trebled version

 

[livingongh325]

hello, it happened to me the same after installing the romis and then the pr1. I do not have a password or anything. Do you know how I can solve it?

Download a luis build that does not have Enforcing SELinux. Although I think they're not available now...

 

[Hernandc86]

Download a luis build that does not have Enforcing SELinux. Although I think they're not available now...

Hi. thanks for answering and how do I identify it? How do I know which one to download? I lower the last, with more recent date.

 

[fudshacker]

Which gcam is working in latest build PR1 please help

 

[livingongh325]

Hi. thanks for answering and how do I identify it? How do I know which one to download? I lower the last, with more recent date.

Any ROM from last month will do...

 

[Ilhamdi]

I flash PR1 with base dotOS 2.4, i have an issue with location accurate, my carrier and gps not work, anybody to solve it?

 

[husnarizqi]

ive flashed p gsi image with lineage 15.1 as base rom.
can i use custom kernel for oreo 8.1 after flasing p gsi image?

edit: tried it and it works but there's a notification after boot says "there's a problem with your internal, contact your manufacturer"

 

[x.Je]

ive flashed p gsi image with lineage 15.1 as base rom.
can i use custom kernel for oreo 8.1 after flasing p gsi image?

Any bugs u r facing?

 

[husnarizqi]

Any bugs u r facing?

yes. but there's lots of fixes you can find in the thread/forum.

gcam crashing when opening video recorder.

volte, wifi, Bluetooth, fingerprint is working. i haven't facing any big problem tbh.
i use PPR1 build.

 

[Nitya153]

Hey
I love the new navigation gestures,
But when I flash volte fix,
They get disabled.
Please help me

 

[KamoPL]

Might sound silly, but how do I know if volte is working? ?

---------- Post added at 07:42 AM ---------- Previous post was at 07:39 AM ----------

Which gcam is working in latest build PR1 please help

Arnova mod worked for me

---------- Post added at 07:45 AM ---------- Previous post was at 07:42 AM ----------

Has anyone faced an issue, where quick settings tiles are a bit too wide and don't fit in the panel?

 

[Nitya153]

Plz help
I need to enable volte
And navigation bar
Flashing volte fix disables it and can't even enable in build prop

 

[Silvergum]

i already following the install guide, but why when i try to reboot the rom it goes to the fastboot mode. please help

 

[husnarizqi]

Plz help
I need to enable volte
And navigation bar
Flashing volte fix disables it and can't even enable in build prop

open build.prop in System/
find: qemu.hw.mainkeys=1
change value to 0
save reboot.

 

[S0NB]

Has anyone faced an issue, where quick settings tiles are a bit too wide and don't fit in the panel?

Yep, same here. Changing the UI scaling helps a bit.

 

[Nitya153]

open build.prop in System/
find: qemu.hw.mainkeys=1
change value to 0
save reboot.

As I mentioned its not working