Hello everyone!
There are some handy tools to flash stock firmware on Nokia devices. In this guide, we'll explain how to install stock firmware without the need of any flashing tools.
Here's the download links for Android 10 Firmware (build v2_410_SP02) & boot image.
Download:
Android 10 - Nov 2020 - 00WW_2_410_SP02
Boot img
NOTE:
This is an OTA package which contains payload.bin file. You can sideload the package through stock recovery by following method
or
You can extract the payload.bin file using payload dumper and flash using Nokia Tool or pack the extracted contents as a zip file, then flash using Nokia Flash Tool (NFT)
___________________
How to install?
[This method is useful if you are from any other ROM / have erased all the data from your device using TWRP; Now want to flash the stock rom, but not ready to flash using above mentioned tools as they take more time for payload.bin extraction, repacking etc.,]
Let's get started!
- Keep the boot img on your PC
- Move the downloaded OTA file to the external SD Card
- Power off the phone
- Hold Volume down + Power button (device will boot into bootloader mode)
- Connect the device to PC with USB cable
- Open command prompt on your PC
- Flash the boot img using fastboot command
- Reboot to Recovery mode (Select "Recovery mode" from bootloader. Android logo will appear. Press Volume up + Power button at the same time. Now the device will boot into Recovery mode)
- Select "Apply update from SD card"
- Navigate to the downloaded OTA zip from external SD card and select it
- After installation compete, you can reboot the device into stock Android 10.
That's all!
(In some cases, the recovery may ask to perform a factory data reset. Proceed to reset and then reboot the device)
Thanks: @Raghu varma @singhnsk @hikari_calyx @sayaoks
There are some handy tools to flash stock firmware on Nokia devices. In this guide, we'll explain how to install stock firmware without the need of any flashing tools.
Here's the download links for Android 10 Firmware (build v2_410_SP02) & boot image.
Download:
Android 10 - Nov 2020 - 00WW_2_410_SP02
Boot img
NOTE:
This is an OTA package which contains payload.bin file. You can sideload the package through stock recovery by following method
or
You can extract the payload.bin file using payload dumper and flash using Nokia Tool or pack the extracted contents as a zip file, then flash using Nokia Flash Tool (NFT)
___________________
How to install?
[This method is useful if you are from any other ROM / have erased all the data from your device using TWRP; Now want to flash the stock rom, but not ready to flash using above mentioned tools as they take more time for payload.bin extraction, repacking etc.,]
Let's get started!
- Keep the boot img on your PC
- Move the downloaded OTA file to the external SD Card
- Power off the phone
- Hold Volume down + Power button (device will boot into bootloader mode)
- Connect the device to PC with USB cable
- Open command prompt on your PC
- Flash the boot img using fastboot command
fastboot flash boot boot.img- Reboot to Recovery mode (Select "Recovery mode" from bootloader. Android logo will appear. Press Volume up + Power button at the same time. Now the device will boot into Recovery mode)
- Select "Apply update from SD card"
- Navigate to the downloaded OTA zip from external SD card and select it
- After installation compete, you can reboot the device into stock Android 10.
That's all!
(In some cases, the recovery may ask to perform a factory data reset. Proceed to reset and then reboot the device)
Thanks: @Raghu varma @singhnsk @hikari_calyx @sayaoks
Last edited:
