• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

[Guide] Install cLK, cLK 1.5, CWM and a NAND rom

Would you like me to write a MAGLDR guide like my cLK guide?

  • Yes

    Votes: 156 86.2%
  • No

    Votes: 25 13.8%

  • Total voters
    181
Search This thread

kylew1212

Senior Member
Dec 1, 2011
485
281
Alabama
www.memoryx2.com
Post 1 How-to install cLK and CWM using HD2 Toolkit.
Post 2 How-to install a rom using CWM
Post 3 How-to install cLK 1.5
Post 4 How-to uninstall HSPl (For warranty issues)


Okay, you asked for it so here it is! Complete! Magldr & Clk! I have built a website centered around my current rom development. And because of lack of space my entire guide is located there as well.
I have added a Magldr guide!

If your USB is broken (good luck charging your phone) BUT DO NOT WORRY!!!!
This guide also covers how to flash rom WITHOUT USB!!!!

Post 3 part 2 (the 2nd way) describes how to install cLK and CWM WITHOUT USB

This is also the most up-to-date cLK version, it has many nice features but it is not yet integrated in HD2 Toolkit and I want this guide to be simple.


How-to Install cLK using HD2 Toolkit and CWM

Note:
CWM stands for Clockwork Mod. CWM is the method of choice for developers to program roms for. CWM supports both MAGLDR and cLK. I am considering writting a MAGLDR guide, but I have not yet. cLK is my preferance and I want this guide to be the best it can be before starting something new.

I know has been posted before, I will use this as a question and answer thread!

I am going to begin from the very beginning.
HSPL Needs to be installed to complete this process.

BACK UP ALL DATA!!!! It will be lost during this process!

First you must choose a rom you want to try.
Here is a link to list of roms currently in development here on XDA. (Thanks yz.hd )

http://forum.xda-developers.com/showthread.php?p=19138750#post19138750

The rom is very important in this process, for mostly one reason. When cLK is flashed their is no way to change the partition size except to reflash it again. this is a lot of trouble so we want to get this right the first time.

Different roms have different size requirements. Each developer will post the size requirements within the first few posts of their rom thread.

The sizes are normally posted in one of two different formats.
The post will say something about partition size:
And then be either 5/220/5 or 220/5

The first format (5/220/5) stands for this:
(CWM size = 5MB/System size = 220MB/Cache size = 5MB)

The second format (220/5) stands for this:
(System size = 220Mb/Cache size = 5MB)

Now the system and the cache size are the only thing needed. The CWM size stays the same.

When you pick the rom you want to use, write down these numbers so that later when you begin flashing your phone you will know what option to pick.

Once you have decided on a rom that you like then you need to download and install the HD2 Toolkit program. ( Thanks ksubedi )

http://forum.xda-developers.com/showthread.php?t=1090783

Once HD2 Toolkit is installed open the program.

Before continuing a 50% phone battery is required!

Click the Download Drivers icon in the lower right corner.
Download the drivers, and unzip them to the desktop.
These will come in later.

Okay, now you are ready to start.

Before we can install a rom, we have to have a bootloader. But before we can install a bootloader, we have to install HSPL.
HSPL basically roots your phone, it allows the use of custom software.

Step 1. Power off your phone.

Step 2. Hold the Volume Down Button and press the End (red) key once.

Continue holding until a multi colored screen appears.

102_0024.jpg


Step 3. Plug in your USB cord to your phone. At the bottom of your Phone it should say SERIAL until your USB is connected. Once USB is connected it should say USB at the bottom.

102_0026.jpg


Step 4. Click Install HSPL at the bottom right hand of the screen. Make sure to install HSPL 2.08 Just follow the steps, and make sure your device meets the requirements before preceeding. (50% battery, anti-viruse disabled, etc)

Step 5. Click the Wipe(Task29) button, right corner, and follow through the steps.
Task 29 Wipes all data off of phone!!

Step 6. Once the wipe(task29) has finished, your phone will be partially booted. Now we need to power down, so pull out the battery, and unplug the USB.

Step 7. Replace the battery.

Step 8. Now again we need the tri-colored screen. So hold volume down and press the end (red) key

Step 9. Once the tri-colored screen appears, let off the buttons and replug the USB cord.

Step 10. On the HD2 Toolkit up at the top click cLK Repartition.

Step 11. One the right there is a column that says Choose System Partition Size (cLK) click what size you want.

Step 12. Below the column is the cache size, there are two options. Pick one. I usually use 5.

Step 13. Now you are ready to install cLK. On the left bottom side of HD2 Toolkit it says Functions, with a few options. Click repartition, and go through the steps on the screen.

Once this is completed your phone will boot into cLK.

102_0017.jpg


Windows 7 computers do not come with this interface installed, and the driver isn't located on Windows update.

Your computer should bring up an option to install Drivers. When it prompts you, locate the google adb drivers on your Desktop. This should install fastboot so that your Phone works.
If you have problems with Windows 7 recognizing the device now that it's booted, try this HERE

Step 14. Once the drivers are installed. The phone (when connected via USB) should say Fastboot: Processing Commands

102_0020.jpg


Step 15. At the top of HD2 Toolkit click the cLK Install Recovery

Step 16. At the bottom of HD2 Toolkit where it says Functions, it will now say install. Click install.

Step 17. When a Radio box appears say there are two methods of installing cLK. Click yes you are in Fastboot mode.

Step 18. A command prompt box will appear. Just hit enter each time an option is given (three times.)

Step 19. After the third time you hit enter, your phone will begin rebooting.
Press and hold the home key when your phone begins to turn on. After about two seconds CWM Recovery will appear Congratulations CWM is installed!

:D:D:D:D:D:D:D:D:D

102_0013.jpg
 
Last edited:

kylew1212

Senior Member
Dec 1, 2011
485
281
Alabama
www.memoryx2.com
How to install a rom using CWM

How to install a NAND rom by Clockwork Mod (CWM)

Definition:
NAND- Nand is internal phone memory.
TMOUS users have 1024 Mega Bytes
EU users have 512 Mega Bytes

Okay, Almost done! cLk and Recovery are both installed!! This is the easy part now!

Earlier, you picked out a rom you wanted to try. Download it and save it to a convenient place. Do not unzip the rom!


Step 1. Turn your phone on, and hold down the home key so that your HD2 boots into CWM.

Step 2. Once your phone has booted into CWM, press the volume down so that mounts and storage is highlighted. Then press the green call button. (This selects what option you want.)

Step 3. Press Volume Down again to select Format SD Card, then select. (Green call button.)

Step 4. Once the SD card is formatted, plug in your USB cord.

Step 5. Press volume down and select Mount USB Storage.

Step 6. Transfer the rom you previously downloaded to your phone SD card.

Step 7. Safely remove USB drive from your computer.

Step 8. Select unmount on your phone.

Step 9. Press back to return to the main menu.

Step 10. Select install zip from SD card.

102_0035.jpg


Step 11. Select choose zip from SD card.

102_0037.jpg


Step 12. At this point select the rom you chose to install.

102_0038.jpg


Step 13. Confirm install.

102_0040.jpg


Step 14. Wait. The rom you chose is installing.

102_0041.jpg


Step 15. Once the rom is installed, press back.
After pressing the back button, the main menu will appear. Select reboot system now.

102_0013.jpg


Step 16. Your system is now booting up for the first time. Give it plenty of time to start up. This can take around 10 minutes, just be patient.

Step 17. Once your system has started and has booted up to the start screen, go through the directions.

Step 18. When you have completed the first boot up process, and have gone through the options when your phone first boots, hold down the end key and shutdown your phone.

Step 19. When your phone has completely shut down, press the end key to turn back on.

Step 20. When your phone turns on to the lockscreen, ENJOY!!




Note: I will add more pictures soon!
 
Last edited:

kylew1212

Senior Member
Dec 1, 2011
485
281
Alabama
www.memoryx2.com
cLk Version 1.5

cLK V1.5 More Advanced Users

Note: cLK V1.5 is newer than cLK 1.6.5 DE, I know its confusing, but cLK V1.5 is the best out right now.

cLK 1.5 includes
-Flashlight
-Ability to resize partitions without computer
-Recovery
-Other things as well :D:D

There is a newer version of cLK that has not yet been updated in the HD2 Toolkit. This new version can be installed two different ways.

It can be downloaded from here:
http://forum.xda-developers.com/showthread.php?t=1114053


1 Way. It can be flashed with HD2 toolkit. (Probably the safest)
2 Way. It can be stored on the root of your sd card and then installed by pressing Volume Down + End. (The benefit is a USB connection is not needed for this method, but more chance of bricking your device although still very slim)

If your USB port is broken, follow the 2nd way posted below!

1st Way. I will be using HD2 Toolkit.

Step 1. Download the attached Leoimg file.

Step 2. Unzip file to someplace convenient.

Step 3. Open HD2 Toolkit.

Step 4. Shutdown phone.

Step 5. Press volume down + end key and hold until tri-colored screen appears.

Step 6. Task 29 on HD2 toolkit.

Step 7. On bottom left of HD2 toolkit theirs an option to install custom ruu, click browse.

Step 8. Navigate to the place you previously unzipped leoimg and select the .nbh file.

Step 9. Click install ruu.

Step 10. Your done!!:D:D:D

2nd Way.

Step 1. Format SD card.

Step 2. Download cLK v 1.5 (The attached LEOIMG.zip file)

Step 3. Extract this file somewhere convenitent

Step 4. Put leoimg.nbh ( from clk 1.5 ) onto root of SD card.

Step 5. Power off phone.

Step 6. Press volume down + end

Step 7. Install by following on screen directions. (press end key)

Step 8. Remove battery

Step 9. Replace battery and power on the phone.

Step 10. Power up phone.

Step 11. Welcome to the new cLK:D






Credits (thanks so much!!)

Cotulla
arif-ali
cedesmith
seadersn
Rick_1995
xdmcdmc
Everyone who keeps the HD2 GOING!!!!
All rom creaters, driver builders, porters, everyone who contributes!!
(I may have missed some one if so please pm me and I will add)
 
Last edited:

kylew1212

Senior Member
Dec 1, 2011
485
281
Alabama
www.memoryx2.com
How to uninstall Hspl

How-to Uninstall HSPL

This will delete all data on your HD2!

Download an official Windows Mobile Rom from here:

http://forum.xda-developers.com/showthread.php?t=577717 (Thanks l3v5y)

Step 1. Back up sd card and format it.

Step 2. Extract the file leoimg.nbh from the official rom you previously downloaded.
(This can be done with a program like 7zip)

Step 3. Copy leoimg.nbh onto the root of your sd card. Only copy this file-- No OTHERS!

Step 4. Press and hold volume down + end keys

Step 5. Follow the onscreen steps. These steps will install Windows Mobile 6.5

Step 6. Reboot your phone. Your phone wil boot into Windows Mobile 6.5 and HSPL is uninstalled. :D



P.S.
I will add more pictures and things soon, this is quickly written to help a friend:)
 
Last edited:

kylew1212

Senior Member
Dec 1, 2011
485
281
Alabama
www.memoryx2.com
several guides already exists.. but nice job anyways :)

Thank you. I know that their are several. I want to contribute to this device and forum because without these two things my phone would be junk.. I don't know how to develop yet (I've been playing around with the kitchen some.. but I am a long way from an actual rom.) But basically i have been reading and trying to help on the question answer forum and I've noticed a lot of people have problems with initally installing Android. I'm not sure if they don't search or what but I wanted to write a fail proof guide. And then when I see someone needing help I can just link them to my guide and hopefully that will answer all questions. I've also found some people having trouble with some steps in other guides. I just want to help out where I can. I'm still working on this though. I'm trying to add lots of pictures, and I'm going to include MAGLDR(I think) and how to install via CWM.:D:D
 
  • Like
Reactions: nyarlathotep and YZ

kylew1212

Senior Member
Dec 1, 2011
485
281
Alabama
www.memoryx2.com
I would uninstall it and then reinstall 2.08

You can install hspl by flashing an official rom (win mobile 6.5) you flash this by putting the leoimg.nbh file on the root of your SD card and pressing volume down + end keys. Once installed theirs really not any need to boot windows just shut down the phone again and start at step 1.

Sent from my HD2 using xda premium
 

AbuSaied

Member
Dec 24, 2011
20
2
The Hague
I would uninstall it and then reinstall 2.08

You can install hspl by flashing an official rom (win mobile 6.5) you flash this by putting the leoimg.nbh file on the root of your SD card and pressing volume down + end keys. Once installed theirs really not any need to boot windows just shut down the phone again and start at step 1.

Sent from my HD2 using xda premium
But how do I uninstall it, and install the 2.08?
 

kylew1212

Senior Member
Dec 1, 2011
485
281
Alabama
www.memoryx2.com
You can uninstall hspl by flashing an official rom (win mobile 6.5) you flash this by putting the leoimg.nbh file on the root of your SD card and pressing volume down + end keys. Once installed theirs really not any need to boot windows just shut down the phone again and start at step 1.

Sent from my HD2 using xda premium

Sorry this is how. I miss typed. I meant uninstall. I will type you out a better guide when I get home as I'm on my phone now.

Sent from my HD2 using xda premium
 
  • Like
Reactions: AbuSaied

kylew1212

Senior Member
Dec 1, 2011
485
281
Alabama
www.memoryx2.com
I would like to read a guide because I'm not that handy to figure it out by my self :p

I do know that I got stuck at the steps with the HD2toolkit because of the HSPL.

I didn't originally include the hspl but I later decided to add it. I will add more steps and help. I'm sorry, but I will make it better :)

Sent from my HD2 using xda premium
 
  • Like
Reactions: AbuSaied

AbuSaied

Member
Dec 24, 2011
20
2
The Hague
Okay I'm back at home now. I wrote you a quick quide to show you the steps. I will make it better soon :) It's the 4th post. Here's the link.

http://forum.xda-developers.com/showpost.php?p=20580194&postcount=4

Hope this help!

It did work! I got to step 13, so the problem with hspl is over.

But as I said, I got stuck at step 13. Normally I should have the phone booted in cLK with a black screen, and then select the drivers. But mine HD2 doesn't do that. When it boots, it boots partially. I got a white schreen with in green letters HTC. This screen stays, and doesn't change at all.

Is there something I did wrong?
 

AbuSaied

Member
Dec 24, 2011
20
2
The Hague
Okay, you need to remove your battery . Then replace it.
After you replace the battery hold volume down + end key. To enter tri color screen.
Plug up your USB cord and now flash clk

Sent from my HD2 using xda premium
Thanks!

I suppose you do that by the repartion function.

I did de flash with cLK version 1.4.0.1 with cLK size of 100MB and 5 mb cache.

The flash went well according to the message of the toolkit. (It was done in approximately 20 seconds.

It finishes with the stituation I started with; white screen with green HTC.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 59
    Post 1 How-to install cLK and CWM using HD2 Toolkit.
    Post 2 How-to install a rom using CWM
    Post 3 How-to install cLK 1.5
    Post 4 How-to uninstall HSPl (For warranty issues)


    Okay, you asked for it so here it is! Complete! Magldr & Clk! I have built a website centered around my current rom development. And because of lack of space my entire guide is located there as well.
    I have added a Magldr guide!

    If your USB is broken (good luck charging your phone) BUT DO NOT WORRY!!!!
    This guide also covers how to flash rom WITHOUT USB!!!!

    Post 3 part 2 (the 2nd way) describes how to install cLK and CWM WITHOUT USB

    This is also the most up-to-date cLK version, it has many nice features but it is not yet integrated in HD2 Toolkit and I want this guide to be simple.


    How-to Install cLK using HD2 Toolkit and CWM

    Note:
    CWM stands for Clockwork Mod. CWM is the method of choice for developers to program roms for. CWM supports both MAGLDR and cLK. I am considering writting a MAGLDR guide, but I have not yet. cLK is my preferance and I want this guide to be the best it can be before starting something new.

    I know has been posted before, I will use this as a question and answer thread!

    I am going to begin from the very beginning.
    HSPL Needs to be installed to complete this process.

    BACK UP ALL DATA!!!! It will be lost during this process!

    First you must choose a rom you want to try.
    Here is a link to list of roms currently in development here on XDA. (Thanks yz.hd )

    http://forum.xda-developers.com/showthread.php?p=19138750#post19138750

    The rom is very important in this process, for mostly one reason. When cLK is flashed their is no way to change the partition size except to reflash it again. this is a lot of trouble so we want to get this right the first time.

    Different roms have different size requirements. Each developer will post the size requirements within the first few posts of their rom thread.

    The sizes are normally posted in one of two different formats.
    The post will say something about partition size:
    And then be either 5/220/5 or 220/5

    The first format (5/220/5) stands for this:
    (CWM size = 5MB/System size = 220MB/Cache size = 5MB)

    The second format (220/5) stands for this:
    (System size = 220Mb/Cache size = 5MB)

    Now the system and the cache size are the only thing needed. The CWM size stays the same.

    When you pick the rom you want to use, write down these numbers so that later when you begin flashing your phone you will know what option to pick.

    Once you have decided on a rom that you like then you need to download and install the HD2 Toolkit program. ( Thanks ksubedi )

    http://forum.xda-developers.com/showthread.php?t=1090783

    Once HD2 Toolkit is installed open the program.

    Before continuing a 50% phone battery is required!

    Click the Download Drivers icon in the lower right corner.
    Download the drivers, and unzip them to the desktop.
    These will come in later.

    Okay, now you are ready to start.

    Before we can install a rom, we have to have a bootloader. But before we can install a bootloader, we have to install HSPL.
    HSPL basically roots your phone, it allows the use of custom software.

    Step 1. Power off your phone.

    Step 2. Hold the Volume Down Button and press the End (red) key once.

    Continue holding until a multi colored screen appears.

    102_0024.jpg


    Step 3. Plug in your USB cord to your phone. At the bottom of your Phone it should say SERIAL until your USB is connected. Once USB is connected it should say USB at the bottom.

    102_0026.jpg


    Step 4. Click Install HSPL at the bottom right hand of the screen. Make sure to install HSPL 2.08 Just follow the steps, and make sure your device meets the requirements before preceeding. (50% battery, anti-viruse disabled, etc)

    Step 5. Click the Wipe(Task29) button, right corner, and follow through the steps.
    Task 29 Wipes all data off of phone!!

    Step 6. Once the wipe(task29) has finished, your phone will be partially booted. Now we need to power down, so pull out the battery, and unplug the USB.

    Step 7. Replace the battery.

    Step 8. Now again we need the tri-colored screen. So hold volume down and press the end (red) key

    Step 9. Once the tri-colored screen appears, let off the buttons and replug the USB cord.

    Step 10. On the HD2 Toolkit up at the top click cLK Repartition.

    Step 11. One the right there is a column that says Choose System Partition Size (cLK) click what size you want.

    Step 12. Below the column is the cache size, there are two options. Pick one. I usually use 5.

    Step 13. Now you are ready to install cLK. On the left bottom side of HD2 Toolkit it says Functions, with a few options. Click repartition, and go through the steps on the screen.

    Once this is completed your phone will boot into cLK.

    102_0017.jpg


    Windows 7 computers do not come with this interface installed, and the driver isn't located on Windows update.

    Your computer should bring up an option to install Drivers. When it prompts you, locate the google adb drivers on your Desktop. This should install fastboot so that your Phone works.
    If you have problems with Windows 7 recognizing the device now that it's booted, try this HERE

    Step 14. Once the drivers are installed. The phone (when connected via USB) should say Fastboot: Processing Commands

    102_0020.jpg


    Step 15. At the top of HD2 Toolkit click the cLK Install Recovery

    Step 16. At the bottom of HD2 Toolkit where it says Functions, it will now say install. Click install.

    Step 17. When a Radio box appears say there are two methods of installing cLK. Click yes you are in Fastboot mode.

    Step 18. A command prompt box will appear. Just hit enter each time an option is given (three times.)

    Step 19. After the third time you hit enter, your phone will begin rebooting.
    Press and hold the home key when your phone begins to turn on. After about two seconds CWM Recovery will appear Congratulations CWM is installed!

    :D:D:D:D:D:D:D:D:D

    102_0013.jpg
    26
    cLk Version 1.5

    cLK V1.5 More Advanced Users

    Note: cLK V1.5 is newer than cLK 1.6.5 DE, I know its confusing, but cLK V1.5 is the best out right now.

    cLK 1.5 includes
    -Flashlight
    -Ability to resize partitions without computer
    -Recovery
    -Other things as well :D:D

    There is a newer version of cLK that has not yet been updated in the HD2 Toolkit. This new version can be installed two different ways.

    It can be downloaded from here:
    http://forum.xda-developers.com/showthread.php?t=1114053


    1 Way. It can be flashed with HD2 toolkit. (Probably the safest)
    2 Way. It can be stored on the root of your sd card and then installed by pressing Volume Down + End. (The benefit is a USB connection is not needed for this method, but more chance of bricking your device although still very slim)

    If your USB port is broken, follow the 2nd way posted below!

    1st Way. I will be using HD2 Toolkit.

    Step 1. Download the attached Leoimg file.

    Step 2. Unzip file to someplace convenient.

    Step 3. Open HD2 Toolkit.

    Step 4. Shutdown phone.

    Step 5. Press volume down + end key and hold until tri-colored screen appears.

    Step 6. Task 29 on HD2 toolkit.

    Step 7. On bottom left of HD2 toolkit theirs an option to install custom ruu, click browse.

    Step 8. Navigate to the place you previously unzipped leoimg and select the .nbh file.

    Step 9. Click install ruu.

    Step 10. Your done!!:D:D:D

    2nd Way.

    Step 1. Format SD card.

    Step 2. Download cLK v 1.5 (The attached LEOIMG.zip file)

    Step 3. Extract this file somewhere convenitent

    Step 4. Put leoimg.nbh ( from clk 1.5 ) onto root of SD card.

    Step 5. Power off phone.

    Step 6. Press volume down + end

    Step 7. Install by following on screen directions. (press end key)

    Step 8. Remove battery

    Step 9. Replace battery and power on the phone.

    Step 10. Power up phone.

    Step 11. Welcome to the new cLK:D






    Credits (thanks so much!!)

    Cotulla
    arif-ali
    cedesmith
    seadersn
    Rick_1995
    xdmcdmc
    Everyone who keeps the HD2 GOING!!!!
    All rom creaters, driver builders, porters, everyone who contributes!!
    (I may have missed some one if so please pm me and I will add)
    24
    How to install a rom using CWM

    How to install a NAND rom by Clockwork Mod (CWM)

    Definition:
    NAND- Nand is internal phone memory.
    TMOUS users have 1024 Mega Bytes
    EU users have 512 Mega Bytes

    Okay, Almost done! cLk and Recovery are both installed!! This is the easy part now!

    Earlier, you picked out a rom you wanted to try. Download it and save it to a convenient place. Do not unzip the rom!


    Step 1. Turn your phone on, and hold down the home key so that your HD2 boots into CWM.

    Step 2. Once your phone has booted into CWM, press the volume down so that mounts and storage is highlighted. Then press the green call button. (This selects what option you want.)

    Step 3. Press Volume Down again to select Format SD Card, then select. (Green call button.)

    Step 4. Once the SD card is formatted, plug in your USB cord.

    Step 5. Press volume down and select Mount USB Storage.

    Step 6. Transfer the rom you previously downloaded to your phone SD card.

    Step 7. Safely remove USB drive from your computer.

    Step 8. Select unmount on your phone.

    Step 9. Press back to return to the main menu.

    Step 10. Select install zip from SD card.

    102_0035.jpg


    Step 11. Select choose zip from SD card.

    102_0037.jpg


    Step 12. At this point select the rom you chose to install.

    102_0038.jpg


    Step 13. Confirm install.

    102_0040.jpg


    Step 14. Wait. The rom you chose is installing.

    102_0041.jpg


    Step 15. Once the rom is installed, press back.
    After pressing the back button, the main menu will appear. Select reboot system now.

    102_0013.jpg


    Step 16. Your system is now booting up for the first time. Give it plenty of time to start up. This can take around 10 minutes, just be patient.

    Step 17. Once your system has started and has booted up to the start screen, go through the directions.

    Step 18. When you have completed the first boot up process, and have gone through the options when your phone first boots, hold down the end key and shutdown your phone.

    Step 19. When your phone has completely shut down, press the end key to turn back on.

    Step 20. When your phone turns on to the lockscreen, ENJOY!!




    Note: I will add more pictures soon!
    11
    How to uninstall Hspl

    How-to Uninstall HSPL

    This will delete all data on your HD2!

    Download an official Windows Mobile Rom from here:

    http://forum.xda-developers.com/showthread.php?t=577717 (Thanks l3v5y)

    Step 1. Back up sd card and format it.

    Step 2. Extract the file leoimg.nbh from the official rom you previously downloaded.
    (This can be done with a program like 7zip)

    Step 3. Copy leoimg.nbh onto the root of your sd card. Only copy this file-- No OTHERS!

    Step 4. Press and hold volume down + end keys

    Step 5. Follow the onscreen steps. These steps will install Windows Mobile 6.5

    Step 6. Reboot your phone. Your phone wil boot into Windows Mobile 6.5 and HSPL is uninstalled. :D



    P.S.
    I will add more pictures and things soon, this is quickly written to help a friend:)
    5
    Windows 7 computers do not come with this interface installed, and the driver isn't located on Windows update.

    Your computer should bring up an option to install Drivers. When it prompts you, locate the google adb drivers on your Desktop. This should install fastboot so that your Phone works.

    I using windows 7 but its not prompts up to install driver.. can u please help me now wat to do ?

    Okay, try this.

    Power on phone and it should boot into clk. Plug up to computer then :

    Start>Control Panel>Hardware & Sound>Device Manager

    An 'unknown device' sould be shown. Right click it>Update driver software

    When menu pops up select browse my computer.
    Select the folder of drivers you previously downloaded. Complete the installation like -- next next next finish ..etc

    EDIT:
    I think the driver can now be found using Windows Update. Previously Windows Update could not find a driver, but recently I crashed my linux computer(yeah, how does that happen right?) and had to re-install my virtual machine for windows 7. When I plugged the phone up Windows found a driver.