[Guide] Install cLK, cLK 1.5, CWM and a NAND rom

Would you like me to write a MAGLDR guide like my cLK guide?

  • Yes

    Votes: 156 86.2%

  • No

    Votes: 25 13.8%
  • Total voters
    181
Search This thread
By:
Advanced…
A

AbuSaied

Member
Dec 24, 2011
20
2
The Hague
kylew1212 said:
CLK doesn't actually show a boot script. In magldr you see a go go go and all that stuff. In clk unless you specifically want to boot into the boot loader you never see it.

Did you go through the steps to install the rom? You have to use cwm to do this.

Now I'm a little confused at what you have going on here.

You have EU hd2 right?
What rom did you decide on again?

Edit : I see your rom, just a minute I need to read it.

Sent from my HD2 using xda premium
Click to expand...
Click to collapse
But normally when I boot my phone, I should see a black screen, right? Because I have to choose the partition space.

"Did you go through the steps to install the rom? You have to use cwm to do this.

Now I'm a little confused at what you have going on here."
I followed your instructions you gave me. What is cwm?

I'm confused too, haha.

Yes I have the EU HD2. Seems logical to me as well, since I live in the EU (The Netherlands) =p.
 
A

AbuSaied

Member
Dec 24, 2011
20
2
The Hague
Somehow I managed to get my phone booted in cLK 1.4. I followed the next steps of your first post, then continued with the second post. Now, my phone is booting for the first time. I'll keep you posted what happens.

What did I do:

- I installed Leo_RADIO_2.15.50.14
- Then started all over again with step 5 of the first post.
 
kylew1212

kylew1212

Senior Member
Dec 1, 2011
485
281
Alabama
www.memoryx2.com
AbuSaied said:
Somehow I managed to get my phone booted in cLK 1.4. I followed the next steps of your first post, then continued with the second post. Now, my phone is booting for the first time. I'll keep you posted what happens.

What did I do:

- I installed Leo_RADIO_2.15.50.14
- Then started all over again with step 5 of the first post.
Click to expand...
Click to collapse

Sorry, I just got home. Good Luck, keep me posted!
 
kylew1212

kylew1212

Senior Member
Dec 1, 2011
485
281
Alabama
www.memoryx2.com
AbuSaied said:
Thanks for your great support!

One final question. Is is possible to install other Roms just by going to the CMW en re-do the steps where you install the ROM? Or are there other steps requierd?
Click to expand...
Click to collapse

Yes, you can reinstall roms all day long doing that-- with a few added steps. :)

For a new rom to function properly it needs a clean install (unless its a update to a rom your already using.)

So you just drop whatever rom you want to try onto your sd card.
Boot into CWM
Choose Mounts and storage option
Then format everything except your sd card.
After formatting is complete press back to return to main menu.
Then choose advanced
On advanced pick wipe davilick cache(I can't spell)
It takes a moment to pop up when selected.
when it finally does pop up choose yes.
Then your good to go, just start right back up with the same step to install your new rom.

But:::::
Some roms require different partition sizes.
that can keep your new rom from booting.
If you try clk 1.5 in post 3 you can change partition sizes without having to reinstall clk everytime.

hope this helps!:)

P.S. I added some new stuff to post 1 (I want this guide to be well written):D
 
  • Like
Reactions: AbuSaied
A

AbuSaied

Member
Dec 24, 2011
20
2
The Hague
kylew1212 said:
Yes, you can reinstall roms all day long doing that-- with a few added steps. :)

For a new rom to function properly it needs a clean install (unless its a update to a rom your already using.)

So you just drop whatever rom you want to try onto your sd card.
Boot into CWM
Choose Mounts and storage option
Then format everything except your sd card.
After formatting is complete press back to return to main menu.
Then choose advanced
On advanced pick wipe davilick cache(I can't spell)
It takes a moment to pop up when selected.
when it finally does pop up choose yes.
Then your good to go, just start right back up with the same step to install your new rom.

But:::::
Some roms require different partition sizes.
that can keep your new rom from booting.
If you try clk 1.5 in post 3 you can change partition sizes without having to reinstall clk everytime.

hope this helps!:)

P.S. I added some new stuff to post 1 (I want this guide to be well written):D
Click to expand...
Click to collapse
Ok thanks!

And if I upgrade to clk 1.5, do I have to re-install CWM?
 
F

fi3ry_icy

Senior Member
Apr 24, 2010
840
37
HTC One X
HTC Leo
i tried to be too clever and flashed clk 1.5 .. now i have no idea how to update clockwork recovery from 3.0.++ to 5.0.2.7 coz the usual USB flasher mode in magldrv isnt availabel in clk 1.5 and and i have no idea how to access fastboot adb pushing method in clk 1.4...

now i have a phone with clk 1.5, ancient recovery and a blank nand coz i cant update recovery to flash the rom i want to use..


============================================================================================================

nvm, i sorted it out...
 
Last edited:
kylew1212

kylew1212

Senior Member
Dec 1, 2011
485
281
Alabama
www.memoryx2.com
fi3ry_icy said:
i tried to be too clever and flashed clk 1.5 .. now i have no idea how to update clockwork recovery from 3.0.++ to 5.0.2.7 coz the usual USB flasher mode in magldrv isnt availabel in clk 1.5 and and i have no idea how to access fastboot adb pushing method in clk 1.4...

now i have a phone with clk 1.5, ancient recovery and a blank nand coz i cant update recovery to flash the rom i want to use..
Click to expand...
Click to collapse

Sorry, I haven't written a guide for that yet... I'm trying to get everything written out.

Power down phone.
Power on phone.
Plug usb into computer & phone.
Once your phone is installed onto your computer(if you have used clk before it's already installed.) open hd2 toolkit.

Once hd2 toolkit is opened, select clk install recovery at the top
Then bottom left click install.
Yes you are in fastboot
Follow steps.
Recovery updated.

note: this clk works the same as the previous ones, just with graphical updates and now it has options but fastboot has not changed.
 
F

fi3ry_icy

Senior Member
Apr 24, 2010
840
37
HTC One X
HTC Leo
kylew1212 said:
Sorry, I haven't written a guide for that yet... I'm trying to get everything written out.

Power down phone.
Power on phone.
Plug usb into computer & phone.
Once your phone is installed onto your computer(if you have used clk before it's already installed.) open hd2 toolkit.

Once hd2 toolkit is opened, select clk install recovery at the top
Then bottom left click install.
Yes you are in fastboot
Follow steps.
Recovery updated.

note: this clk works the same as the previous ones, just with graphical updates and now it has options but fastboot has not changed.
Click to expand...
Click to collapse

i sorted it out but not using this method lol..

previously we have the black screen, white words in your screenshot which shows the phone is in fastboot mode.. ffor clk 1.5, how do we know we are in fastboot mode? rom your explanation above, we just power down the phone, plug in the usb into the computer and phone and the phone would be activated in fastboot mode.. is that correct?
 
kylew1212

kylew1212

Senior Member
Dec 1, 2011
485
281
Alabama
www.memoryx2.com
Or you can boot into CWM recovery and install the attached file. And then reboot phone:)


EDIT: I added this to original post as well.
 

Attachments

  • recovery_5.0.2.6_leo_CWR.zip
    4.3 MB · Views: 74
Last edited:
  • Like
Reactions: nqkoidrug
kylew1212

kylew1212

Senior Member
Dec 1, 2011
485
281
Alabama
www.memoryx2.com
fi3ry_icy said:
i sorted it out but not using this method lol..

previously we have the black screen, white words in your screenshot which shows the phone is in fastboot mode.. ffor clk 1.5, how do we know we are in fastboot mode? rom your explanation above, we just power down the phone, plug in the usb into the computer and phone and the phone would be activated in fastboot mode.. is that correct?
Click to expand...
Click to collapse

Actually, it still says fastboot() processing commands once usb is plugged up and installed. Look in the above post I added a much better fix, sorry.
 
YZ

YZ

Retired Forum Moderator
Mar 24, 2010
1,665
3,430
sn0vvman said:
Hi, Kylev1212.
I'v searched through the thread, but could not find how to to resize cLK partitions without computer as it was declared:
Click to expand...
Click to collapse

How to resize:

Code: 
fastboot oem part-resize system:160

if you want to re size misc, then just change system with misc.

Then:

Code: 
fastboot oem part-commit

Remember, when you do this, you will have to re flash cwm.
 
  • Like
Reactions: dy2k and sn0vvman
Marvlesz

Marvlesz

Senior Member
Jun 28, 2010
2,318
740
Saudi Arabia
sn0vvman said:
Hi, Kylev1212.
I'v searched through the thread, but could not find how to to resize cLK partitions without computer as it was declared:
Click to expand...
Click to collapse

After installing cLK 1.5.

Power Down > Power Up with Back Button Pressed > Go to "Settings" > "Repartition NaND" !


yz.hd said:
Remember, when you do this, you will have to re flash cwm.
Click to expand...
Click to collapse

You don't really need to re-flash cwm :D (at least I don't, I have never reflashed cwm after repartitioning, and everything goes just fine ! :) )
 
  • Like
Reactions: sn0vvman
You must log in or register to reply here.

Similar threads

dcordes
  • Poll
[Discussion]Linux and Android on the HD2 *READ POST3 BEFORE ASKING QUESTIONS*
Replies
10K
Views
4M
K
kanishkapd
H
[Jul 28][REF] ★★★The Definitve Guide To Android On HTC HD2 ★★★ [UPDATED]
Replies
1K
Views
780K
i_4_u89
i_4_u89
T
  • Locked
[CLOSED] ANDROID/MAEMO/LINUX on HD2:) [NO MORE ACTIVE!!]
Replies
1K
Views
623K
kankam
kankam
jmz
  • Locked
[Discussion] NAND boot Android on HD2 (No it doesn't exist, just development)
Replies
1K
Views
437K
dharvey4651
dharvey4651
mskip
  • Locked
HD2 Android NAND Updates ONLY [No Discussion]
Replies
60
Views
323K
dharvey4651
dharvey4651

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 59
    kylew1212
    kylew1212
    Post 1 How-to install cLK and CWM using HD2 Toolkit.
    Post 2 How-to install a rom using CWM
    Post 3 How-to install cLK 1.5
    Post 4 How-to uninstall HSPl (For warranty issues)

    Okay, you asked for it so here it is! Complete! Magldr & Clk! I have built a website centered around my current rom development. And because of lack of space my entire guide is located there as well.
    I have added a Magldr guide!

    If your USB is broken (good luck charging your phone) BUT DO NOT WORRY!!!!
    This guide also covers how to flash rom WITHOUT USB!!!!

    Post 3 part 2 (the 2nd way) describes how to install cLK and CWM WITHOUT USB

    This is also the most up-to-date cLK version, it has many nice features but it is not yet integrated in HD2 Toolkit and I want this guide to be simple.


    How-to Install cLK using HD2 Toolkit and CWM

    Note:
    CWM stands for Clockwork Mod. CWM is the method of choice for developers to program roms for. CWM supports both MAGLDR and cLK. I am considering writting a MAGLDR guide, but I have not yet. cLK is my preferance and I want this guide to be the best it can be before starting something new.

    I know has been posted before, I will use this as a question and answer thread!

    I am going to begin from the very beginning.
    HSPL Needs to be installed to complete this process.

    BACK UP ALL DATA!!!! It will be lost during this process!

    First you must choose a rom you want to try.
    Here is a link to list of roms currently in development here on XDA. (Thanks yz.hd )

    http://xdaforums.com/showthread.php?p=19138750#post19138750

    The rom is very important in this process, for mostly one reason. When cLK is flashed their is no way to change the partition size except to reflash it again. this is a lot of trouble so we want to get this right the first time.

    Different roms have different size requirements. Each developer will post the size requirements within the first few posts of their rom thread.

    The sizes are normally posted in one of two different formats.
    The post will say something about partition size:
    And then be either 5/220/5 or 220/5

    The first format (5/220/5) stands for this:
    (CWM size = 5MB/System size = 220MB/Cache size = 5MB)

    The second format (220/5) stands for this:
    (System size = 220Mb/Cache size = 5MB)

    Now the system and the cache size are the only thing needed. The CWM size stays the same.

    When you pick the rom you want to use, write down these numbers so that later when you begin flashing your phone you will know what option to pick.

    Once you have decided on a rom that you like then you need to download and install the HD2 Toolkit program. ( Thanks ksubedi )

    http://xdaforums.com/showthread.php?t=1090783

    Once HD2 Toolkit is installed open the program.

    Before continuing a 50% phone battery is required!

    Click the Download Drivers icon in the lower right corner.
    Download the drivers, and unzip them to the desktop.
    These will come in later.

    Okay, now you are ready to start.

    Before we can install a rom, we have to have a bootloader. But before we can install a bootloader, we have to install HSPL.
    HSPL basically roots your phone, it allows the use of custom software.

    Step 1. Power off your phone.

    Step 2. Hold the Volume Down Button and press the End (red) key once.

    Continue holding until a multi colored screen appears.

    102_0024.jpg


    Step 3. Plug in your USB cord to your phone. At the bottom of your Phone it should say SERIAL until your USB is connected. Once USB is connected it should say USB at the bottom.

    102_0026.jpg


    Step 4. Click Install HSPL at the bottom right hand of the screen. Make sure to install HSPL 2.08 Just follow the steps, and make sure your device meets the requirements before preceeding. (50% battery, anti-viruse disabled, etc)

    Step 5. Click the Wipe(Task29) button, right corner, and follow through the steps.
    Task 29 Wipes all data off of phone!!

    Step 6. Once the wipe(task29) has finished, your phone will be partially booted. Now we need to power down, so pull out the battery, and unplug the USB.

    Step 7. Replace the battery.

    Step 8. Now again we need the tri-colored screen. So hold volume down and press the end (red) key

    Step 9. Once the tri-colored screen appears, let off the buttons and replug the USB cord.

    Step 10. On the HD2 Toolkit up at the top click cLK Repartition.

    Step 11. One the right there is a column that says Choose System Partition Size (cLK) click what size you want.

    Step 12. Below the column is the cache size, there are two options. Pick one. I usually use 5.

    Step 13. Now you are ready to install cLK. On the left bottom side of HD2 Toolkit it says Functions, with a few options. Click repartition, and go through the steps on the screen.

    Once this is completed your phone will boot into cLK.

    102_0017.jpg


    Windows 7 computers do not come with this interface installed, and the driver isn't located on Windows update.

    Your computer should bring up an option to install Drivers. When it prompts you, locate the google adb drivers on your Desktop. This should install fastboot so that your Phone works.
    If you have problems with Windows 7 recognizing the device now that it's booted, try this HERE

    Step 14. Once the drivers are installed. The phone (when connected via USB) should say Fastboot: Processing Commands

    102_0020.jpg


    Step 15. At the top of HD2 Toolkit click the cLK Install Recovery

    Step 16. At the bottom of HD2 Toolkit where it says Functions, it will now say install. Click install.

    Step 17. When a Radio box appears say there are two methods of installing cLK. Click yes you are in Fastboot mode.

    Step 18. A command prompt box will appear. Just hit enter each time an option is given (three times.)

    Step 19. After the third time you hit enter, your phone will begin rebooting.
    Press and hold the home key when your phone begins to turn on. After about two seconds CWM Recovery will appear Congratulations CWM is installed!

    :D:D:D:D:D:D:D:D:D

    102_0013.jpg
    View
    26
    kylew1212
    kylew1212
    cLk Version 1.5

    cLK V1.5 More Advanced Users

    Note: cLK V1.5 is newer than cLK 1.6.5 DE, I know its confusing, but cLK V1.5 is the best out right now.

    cLK 1.5 includes
    -Flashlight
    -Ability to resize partitions without computer
    -Recovery
    -Other things as well :D:D

    There is a newer version of cLK that has not yet been updated in the HD2 Toolkit. This new version can be installed two different ways.

    It can be downloaded from here:
    http://xdaforums.com/showthread.php?t=1114053


    1 Way. It can be flashed with HD2 toolkit. (Probably the safest)
    2 Way. It can be stored on the root of your sd card and then installed by pressing Volume Down + End. (The benefit is a USB connection is not needed for this method, but more chance of bricking your device although still very slim)

    If your USB port is broken, follow the 2nd way posted below!

    1st Way. I will be using HD2 Toolkit.

    Step 1. Download the attached Leoimg file.

    Step 2. Unzip file to someplace convenient.

    Step 3. Open HD2 Toolkit.

    Step 4. Shutdown phone.

    Step 5. Press volume down + end key and hold until tri-colored screen appears.

    Step 6. Task 29 on HD2 toolkit.

    Step 7. On bottom left of HD2 toolkit theirs an option to install custom ruu, click browse.

    Step 8. Navigate to the place you previously unzipped leoimg and select the .nbh file.

    Step 9. Click install ruu.

    Step 10. Your done!!:D:D:D

    2nd Way.

    Step 1. Format SD card.

    Step 2. Download cLK v 1.5 (The attached LEOIMG.zip file)

    Step 3. Extract this file somewhere convenitent

    Step 4. Put leoimg.nbh ( from clk 1.5 ) onto root of SD card.

    Step 5. Power off phone.

    Step 6. Press volume down + end

    Step 7. Install by following on screen directions. (press end key)

    Step 8. Remove battery

    Step 9. Replace battery and power on the phone.

    Step 10. Power up phone.

    Step 11. Welcome to the new cLK:D






    Credits (thanks so much!!)

    Cotulla
    arif-ali
    cedesmith
    seadersn
    Rick_1995
    xdmcdmc
    Everyone who keeps the HD2 GOING!!!!
    All rom creaters, driver builders, porters, everyone who contributes!!
    (I may have missed some one if so please pm me and I will add)
    View
    24
    kylew1212
    kylew1212
    How to install a rom using CWM

    How to install a NAND rom by Clockwork Mod (CWM)

    Definition:
    NAND- Nand is internal phone memory.
    TMOUS users have 1024 Mega Bytes
    EU users have 512 Mega Bytes

    Okay, Almost done! cLk and Recovery are both installed!! This is the easy part now!

    Earlier, you picked out a rom you wanted to try. Download it and save it to a convenient place. Do not unzip the rom!


    Step 1. Turn your phone on, and hold down the home key so that your HD2 boots into CWM.

    Step 2. Once your phone has booted into CWM, press the volume down so that mounts and storage is highlighted. Then press the green call button. (This selects what option you want.)

    Step 3. Press Volume Down again to select Format SD Card, then select. (Green call button.)

    Step 4. Once the SD card is formatted, plug in your USB cord.

    Step 5. Press volume down and select Mount USB Storage.

    Step 6. Transfer the rom you previously downloaded to your phone SD card.

    Step 7. Safely remove USB drive from your computer.

    Step 8. Select unmount on your phone.

    Step 9. Press back to return to the main menu.

    Step 10. Select install zip from SD card.

    102_0035.jpg


    Step 11. Select choose zip from SD card.

    102_0037.jpg


    Step 12. At this point select the rom you chose to install.

    102_0038.jpg


    Step 13. Confirm install.

    102_0040.jpg


    Step 14. Wait. The rom you chose is installing.

    102_0041.jpg


    Step 15. Once the rom is installed, press back.
    After pressing the back button, the main menu will appear. Select reboot system now.

    102_0013.jpg


    Step 16. Your system is now booting up for the first time. Give it plenty of time to start up. This can take around 10 minutes, just be patient.

    Step 17. Once your system has started and has booted up to the start screen, go through the directions.

    Step 18. When you have completed the first boot up process, and have gone through the options when your phone first boots, hold down the end key and shutdown your phone.

    Step 19. When your phone has completely shut down, press the end key to turn back on.

    Step 20. When your phone turns on to the lockscreen, ENJOY!!




    Note: I will add more pictures soon!
    View
    11
    kylew1212
    kylew1212
    How to uninstall Hspl

    How-to Uninstall HSPL

    This will delete all data on your HD2!

    Download an official Windows Mobile Rom from here:

    http://xdaforums.com/showthread.php?t=577717 (Thanks l3v5y)

    Step 1. Back up sd card and format it.

    Step 2. Extract the file leoimg.nbh from the official rom you previously downloaded.
    (This can be done with a program like 7zip)

    Step 3. Copy leoimg.nbh onto the root of your sd card. Only copy this file-- No OTHERS!

    Step 4. Press and hold volume down + end keys

    Step 5. Follow the onscreen steps. These steps will install Windows Mobile 6.5

    Step 6. Reboot your phone. Your phone wil boot into Windows Mobile 6.5 and HSPL is uninstalled. :D



    P.S.
    I will add more pictures and things soon, this is quickly written to help a friend:)
    View
    5
    kylew1212
    kylew1212
    Himanshu09 said:
    Windows 7 computers do not come with this interface installed, and the driver isn't located on Windows update.

    Your computer should bring up an option to install Drivers. When it prompts you, locate the google adb drivers on your Desktop. This should install fastboot so that your Phone works.

    I using windows 7 but its not prompts up to install driver.. can u please help me now wat to do ?
    Click to expand...
    Click to collapse

    Okay, try this.

    Power on phone and it should boot into clk. Plug up to computer then :

    Start>Control Panel>Hardware & Sound>Device Manager

    An 'unknown device' sould be shown. Right click it>Update driver software

    When menu pops up select browse my computer.
    Select the folder of drivers you previously downloaded. Complete the installation like -- next next next finish ..etc

    EDIT:
    I think the driver can now be found using Windows Update. Previously Windows Update could not find a driver, but recently I crashed my linux computer(yeah, how does that happen right?) and had to re-install my virtual machine for windows 7. When I plugged the phone up Windows found a driver.
    View

New posts