[GUIDE] Install GSI on Galaxy S9 Snapdragon

[G0dZill4]

Goog day, I installed :
1) the last stock G9600ZHS5CSH2 (security patch 2019-08-01)
2) twrp
3) last PE (2019-08-24) / Havoc/ EvolutionX
and nowhere does the auto brightness work for me. Fingerprint can be said not working, the phone vibrates when you touch the scanner, but I couldn’t add. I could only install AOD from Havoc (enableAOD-twrp.zip).
How to fix it?

 

[cristiansc93]

Is there a way to get the stock camera working?

 

[FedericoPeranzi]

Goog day, I installed :
1) the last stock G9600ZHS5CSH2 (security patch 2019-08-01)
2) twrp
3) last PE (2019-08-24) / Havoc/ EvolutionX
and nowhere does the auto brightness work for me. Fingerprint can be said not working, the phone vibrates when you touch the scanner, but I couldn’t add. I could only install AOD from Havoc (enableAOD-twrp.zip).
How to fix it?

I will test the Android 10, if i make booteable, i update the Guide and tell if works the auto brightness/Fingerprint

 

[G0dZill4]

I will test the Android 10, if i make booteable, i update the Guide and tell if works the auto brightness/Fingerprint

Fingerprint fixed by this command - setprop persist.sys.phh.samsung_fingerprint 0 (and for s10)
auto-brightness should be corrected overlay, but I couldn’t make it yet

 

[FedericoPeranzi]

Goog day, I installed :
1) the last stock G9600ZHS5CSH2 (security patch 2019-08-01)
2) twrp
3) last PE (2019-08-24) / Havoc/ EvolutionX
and nowhere does the auto brightness work for me. Fingerprint can be said not working, the phone vibrates when you touch the scanner, but I couldn’t add. I could only install AOD from Havoc (enableAOD-twrp.zip).
How to fix it?

Updated post with the fix

 

[FedericoPeranzi]

Goog day, I installed :
1) the last stock G9600ZHS5CSH2 (security patch 2019-08-01)
2) twrp
3) last PE (2019-08-24) / Havoc/ EvolutionX
and nowhere does the auto brightness work for me. Fingerprint can be said not working, the phone vibrates when you touch the scanner, but I couldn’t add. I could only install AOD from Havoc (enableAOD-twrp.zip).
How to fix it?

All it's fixed BRO.

Follow this:

Install the last Samsung Firmware (September security patch)
Follow my guide.
Install the fix I attached
edit vendor/build.prop and chage this line:

ro.vendor.build.fingerprint=samsung... to ro.vendor.build.fingerprint=Samsung

 

[G0dZill4]

All it's fixed BRO.

Follow this:

Install the last Samsung Firmware (September security patch)
Follow my guide.
Install the fix I attached
edit vendor/build.prop and chage this line:

ro.vendor.build.fingerprint=samsung... to ro.vendor.build.fingerprint=Samsung

Good news, I'll try.
they say now it’s not everywhere you need to remove the system/bin/rw_system.sh...on phh-treble (Pie) exactly do not need.

 

[megaxp]

I did not get a good result when installing the AOD and AutoBright patch, I keep the brightness at 0 and, although I slide the brightness bar, it does not increase.
any solution? thanks for you work!
i try install PE, AEX and Havoc... the problem of dark brightness persist
i have september patch with 5.5 gsi kernel
@FedericoPeranzi

 

[Dr_Liquid]

Battery life?

I heard something a long while back that if you unlock the boot loader or root your device or something along those lines, you're only able to charge your device to 80%. Is that true?

 

[klabit87]

I heard something a long while back that if you unlock the boot loader or root your device or something along those lines, you're only able to charge your device to 80%. Is that true?

No. Not true at all.

Sent from my Pixel 2 XL using Tapatalk

 

[G0dZill4]

I did not get a good result when installing the AOD and AutoBright patch, I keep the brightness at 0 and, although I slide the brightness bar, it does not increase.
any solution? thanks for you work!
i try install PE, AEX and Havoc... the problem of dark brightness persist
i have september patch with 5.5 gsi kernel
@FedericoPeranzi

You can try this. I can’t check now for sure, but this one or similar from FedericoPeranzi zip helped me
- install enableAutoBrightness-twrp.zip. if that doesn't work just delete /vendor/overlay/treble-overlay-auto-brightness.apk

 

[FedericoPeranzi]

I did not get a good result when installing the AOD and AutoBright patch, I keep the brightness at 0 and, although I slide the brightness bar, it does not increase.
any solution? thanks for you work!
i try install PE, AEX and Havoc... the problem of dark brightness persist
i have september patch with 5.5 gsi kernel
@FedericoPeranzi

Install August firnware and then install the Pixel P Experice, and then the fix

 

[Light_Wing]

I'm getting 'rm -rf "/system/bin/rw-system.sh" process ended with ERROR: 1' while trying to delete that file...

(I tried moving it, chmod'ing it and all the twrp options I have to do on the file, they all ended with the same error)

What should I do?

 

[G0dZill4]

I'm getting 'rm -rf "/system/bin/rw-system.sh" process ended with ERROR: 1' while trying to delete that file...

(I tried moving it, chmod'ing it and all the twrp options I have to do on the file, they all ended with the same error)

What should I do?

in "Mounts" remove the checkbox with "read-only"

---------- Post added at 09:00 AM ---------- Previous post was at 08:12 AM ----------

All it's fixed BRO.

Follow this:

Install the last Samsung Firmware (September security patch)
Follow my guide.
Install the fix I attached
edit vendor/build.prop and chage this line:

ro.vendor.build.fingerprint=samsung... to ro.vendor.build.fingerprint=Samsung

Good day, check pls. After installing the last sams firmware we have latest security patch/bootloader and I think because of this there were problems. Latest GSI roms > 08.2019 - installs and configures well but as soon as you reboot, the screen stops responding and turns on spontaneously. Auto-brightness only works with the patch. If we install an old vendor - auto-brightness works without a patch, but after rebooting there remains a bug with the screen.
Old roms, for example EvolutionX (https://evolutionx.ml/) - everything works perfectly. New vendor, auto-brightness only works with a patch, old vendor -works out of the box.
LeoRom v10 (which is based on stock sams) - bug with the screen.
I don’t understand what the problem is

 

[Epic htc 1]

Sooo does this work for Verizon S9+??? Because last I read there is no root method for snapdragon s9.If I understand this correct I need root method in order to use a treble rom. Is there even a stable treble rom for the Verizon s9 plus

 

[klabit87]

Sooo does this work for Verizon S9+??? Because last I read there is no root method for snapdragon s9.If I understand this correct I need root method in order to use a treble rom. Is there even a stable treble rom for the Verizon s9 plus

No this does not work for the Verizon model or any other model that is the sm-g960u or sm-g965u.
This only works for Snapdragon models sm-g9600 and sm-g9650.
There is currently no way to install any gsi or treble rom on the locked variants.

Sent from my Pixel 2 XL using Tapatalk

 

[FedericoPeranzi]

Updated thread

 

[ottoland]

i have a problem i installed this rom but when i turn off or restart the phone the lokc screen restart and restart and i cant pass of that screen i don´t know if that is a problem of the rom, can anyone help me???

sorry for my bad english

 

[boladaso]

in "Mounts" remove the checkbox with "read-only"

---------- Post added at 09:00 AM ---------- Previous post was at 08:12 AM ----------



Good day, check pls. After installing the last sams firmware we have latest security patch/bootloader and I think because of this there were problems. Latest GSI roms > 08.2019 - installs and configures well but as soon as you reboot, the screen stops responding and turns on spontaneously. Auto-brightness only works with the patch. If we install an old vendor - auto-brightness works without a patch, but after rebooting there remains a bug with the screen.
Old roms, for example EvolutionX (https://evolutionx.ml/) - everything works perfectly. New vendor, auto-brightness only works with a patch, old vendor -works out of the box.
LeoRom v10 (which is based on stock sams) - bug with the screen.
I don’t understand what the problem is

Do not delete the file system/bin/rw_system.sh That you will not have the bug with the screen does not respond . I'm at OREO vendor and I had this bug

 

[FedericoPeranzi]

Nwe images, more Pixel Experience