• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

[Guide] Install Magisk On Galaxy s7 Exynos Safety Net in Green

Search This thread

IceGordol

Member
Jul 27, 2017
38
15
Fistly, I am not responsible to any harm done to your device. You should know what you are doing.
Secondly, this WILL TRIGGER KNOX irreversibly.
You will also have to format your internal memory in case you have never done this before.
KEEP THAT IN MIND


So you are going to need twrp for exynos: here
Latest Magisk installer zip: here
Odin: here
Not entirely sure if it is required but force encryption disabler: here

1) Go to developer settings in your phone and enable "OEM unlocking". Transfer the magisk zip onto the device and the encryption disabler zip.
2) Shut down your phone and hold power button+home button+volume down to turn it on. press volume up and plug it into your pc directly (without a hub)
3) Open odin and load in the AP section the TWRP file (it's an .img.tar). Disable auto reboot and flash
4) Hold power+home+volume down and, after it leaves download mode, change from volume up to volume up.
5) REALLY IMPORTANT IN ORDER TO KEEP SAFETY NET is to press "keep system read only"
6) IN CASE YOU CAN'T READ THE INTERNAL STORAGE OF YOUR PHONE (check that by pressing on install and checking internal storage), go to format-->format data and type yes. It explains there that, by doing so, you will remove encryption.
7) Now go to install and flash the encryption disabler and then the magisk zip

In theory, if all of this has been properly done, magisk su will be installed and your safety net will be in green.
If you have any questions, don't hesitate to ask.
Looking forward to any sugestions.

Here is proof that this works.
yWfMuOK.png
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Fistly, I am not responsible to any harm done to your device. You should know what you are doing.
    Secondly, this WILL TRIGGER KNOX irreversibly.
    You will also have to format your internal memory in case you have never done this before.
    KEEP THAT IN MIND


    So you are going to need twrp for exynos: here
    Latest Magisk installer zip: here
    Odin: here
    Not entirely sure if it is required but force encryption disabler: here

    1) Go to developer settings in your phone and enable "OEM unlocking". Transfer the magisk zip onto the device and the encryption disabler zip.
    2) Shut down your phone and hold power button+home button+volume down to turn it on. press volume up and plug it into your pc directly (without a hub)
    3) Open odin and load in the AP section the TWRP file (it's an .img.tar). Disable auto reboot and flash
    4) Hold power+home+volume down and, after it leaves download mode, change from volume up to volume up.
    5) REALLY IMPORTANT IN ORDER TO KEEP SAFETY NET is to press "keep system read only"
    6) IN CASE YOU CAN'T READ THE INTERNAL STORAGE OF YOUR PHONE (check that by pressing on install and checking internal storage), go to format-->format data and type yes. It explains there that, by doing so, you will remove encryption.
    7) Now go to install and flash the encryption disabler and then the magisk zip

    In theory, if all of this has been properly done, magisk su will be installed and your safety net will be in green.
    If you have any questions, don't hesitate to ask.
    Looking forward to any sugestions.

    Here is proof that this works.
    yWfMuOK.png