[GUIDE] INTEROP-UNLOCK - NEW unlocks for ALL SAMSUNG WP7 devices!!

Search This thread
By:
Advanced…
C

Cabrini

Senior Member
May 2, 2011
50
0
Zaragoza
Heathcliff74 said:
Read the opening post of this thread. Especially the part with title "PREPARE YOUR PHONE AGAINST RELOCK". That should work.

Good luck,
Heathcliff74
Click to expand...
Click to collapse



Hello, Heathcliff74.
Thanks for answering so soon., but precisely he wanted to install Interop Unlock because with Chevron I could not have installed WP7 Root Tools (he settles but says to me that with Chevron it is not sufficient that he installs Interop Unlock) That's why I think that the problem is in having updated drivers 2 of HTC... Anyway, I am going to try it once again... Thanks for you time. Greetings.
 
Heathcliff74

Heathcliff74

Inactive Recognized Developer
Dec 1, 2010
1,646
2,610
Cabrini said:
Hello, Heathcliff74.
Thanks for answering so soon., but precisely he wanted to install Interop Unlock because with Chevron I could not have installed WP7 Root Tools (he settles but says to me that with Chevron it is not sufficient that he installs Interop Unlock) That's why I think that the problem is in having updated drivers 2 of HTC... Anyway, I am going to try it once again... Thanks for you time. Greetings.
Click to expand...
Click to collapse

Ok. I misunderstood. So you don't have Interop Unlock yet. In that case you need to downgrade. 2 options: If you have a backup from your phone when it was still on SPL 3 (or 4), then restore that backup. If you don't have such backup, then the only option is the Goldcard method. After you downgraded the SPL, you can either flash HSPL and a Custom Unlocked ROM, or you can flash an older stock ROM, apply Interop Unlock and take necessary precautions for Relocking and then upgrade to the latest OS version.

I hope that helps.
Heathcliff74
 
C

Cabrini

Senior Member
May 2, 2011
50
0
Zaragoza
Heathcliff74 said:
Ok. I misunderstood. So you don't have Interop Unlock yet. In that case you need to downgrade. 2 options: If you have a backup from your phone when it was still on SPL 3 (or 4), then restore that backup. If you don't have such backup, then the only option is the Goldcard method. After you downgraded the SPL, you can either flash HSPL and a Custom Unlocked ROM, or you can flash an older stock ROM, apply Interop Unlock and take necessary precautions for Relocking and then upgrade to the latest OS version.

I hope that helps.
Heathcliff74
Click to expand...
Click to collapse



Hello, Heathcliff74.
Thanks for you interest and your responses. I was afraid that the GoldCard is the only solution, it is an indolence; to look for the cables, etc, etc. I will try It in a few days. Thank you again and greetings.
 
Kushan.modi

Kushan.modi

Senior Member
Dec 21, 2012
334
132
Ahmedabad
dazza9075 said:
Posting in different forums an threads an asking the same question isn't going to help you, this isn't the right thread post a new thread in Q and A

Sent from my Arc using xda app-developers app
Click to expand...
Click to collapse

I do not want to overload xda with threads thats why I prefer to ask question in thread of omnia w anyway I think there is no solution for my problem... thanks

Sent from my A15 using Tapatalk 2
 
prahladvarda

prahladvarda

Senior Member
Jun 13, 2012
244
40
Mysore
Kushan.modi said:
I do not want to overload xda with threads thats why I prefer to ask question in thread of omnia w anyway I think there is no solution for my problem... thanks

Sent from my A15 using Tapatalk 2
Click to expand...
Click to collapse

Actually asking questions in wrong threads doesnt yield u anything..when u start a new thread with some title, a list of threads with similar topics all over xda will appear as suggestions..if u still dont find ur problem listed there, then u can create a new thread whih doesnt overload at all..overloading is asking same thing in different sections again and again..not creating a thread with a topic that has not existed..

Prahlad Varda
 
  • Like
Reactions: dazza9075
M

mrunal.zode

Senior Member
Oct 11, 2012
76
2
thane,mumbai
nokia maps...

hi i am new to windows phone. i got samsung omnia w updated to 7.8. i am really happy with the phone, but i really miss google maps/ nokia drive with great navigation. what do i have to do to install google maps/ nokia drive. also it will great if i can install apps for free.lol.
plz guide me.
 
D

dazza9075

Senior Member
Jul 22, 2007
2,858
493
Suffolk
mrunal.zode said:
hi i am new to windows phone. i got samsung omnia w updated to 7.8. i am really happy with the phone, but i really miss google maps/ nokia drive with great navigation. what do i have to do to install google maps/ nokia drive. also it will great if i can install apps for free.lol.
plz guide me.
Click to expand...
Click to collapse

Youd best turn around then, there is no tolerance of piracy here. Nokia drive is a grey area since its free, its available via the Nokia marketplace an if your phone is unlocked ten there are apps available to change markets but these can bugger up your device. As for Google, their a pain in the arse, bing maps is a good alternative to google




Sent from my Arc using xda app-developers app
 
Stagnation1

Stagnation1

Member
Jul 1, 2010
29
4
I'm getting ready to trade in a Focus S that's been interop-unlocked in this way to AT&T. Will a hard reset be enough or do I need to restore from an old backup (assuming I still have one)?
 
prahladvarda

prahladvarda

Senior Member
Jun 13, 2012
244
40
Mysore
Orihack said:
What about Samsung Omnia M a chance to unlock?
Click to expand...
Click to collapse

the method described in the opening post is common for 2nd Gen Samsung devices to which Omnia m belongs..so u can use the same method..

Prahlad Varada

---------- Post added at 08:55 PM ---------- Previous post was at 08:51 PM ----------
Heathcliff74 said:
If there is a ROM dump available somewhere, I might be able to have a look. But, to be honest, I have too many projects and not enough time.
Click to expand...
Click to collapse

windowbreak worked based on the principle that u can make changes to registry using a provisioning XML..and this method changes registry keys and values using what??at least tell me when u r going to publish answer for this question..LOL :victory:

Thanks
Prahlad varada
 
Last edited:
  • Like
Reactions: mikaelel
Heathcliff74

Heathcliff74

Inactive Recognized Developer
Dec 1, 2010
1,646
2,610
prahladvarda said:
the method described in the opening post is common for 2nd Gen Samsung devices to which Omnia m belongs..so u can use the same method..

Prahlad Varada

---------- Post added at 08:55 PM ---------- Previous post was at 08:51 PM ----------



windowbreak worked based on the principle that u can make changes to registry using a provisioning XML..and this method changes registry keys and values using what??at least tell me when u r going to publish answer for this question..LOL :victory:

Thanks
Prahlad varada
Click to expand...
Click to collapse

Omnia M cannot be unlocked with current methods. I analyzed a ROM dump and it differs in some ways. Other devices cannot be unlocked this way either. So explaining the unlocks won't help. The latest unlocks are based on a whole string of exploits. I cannot reveil too much for obvious reasons.

Ciao,
Heathcliff74
 
prahladvarda

prahladvarda

Senior Member
Jun 13, 2012
244
40
Mysore
Heathcliff74 said:
Omnia M cannot be unlocked with current methods. I analyzed a ROM dump and it differs in some ways. Other devices cannot be unlocked this way either. So explaining the unlocks won't help. The latest unlocks are based on a whole string of exploits. I cannot reveil too much for obvious reasons.

Ciao,
Heathcliff74
Click to expand...
Click to collapse

yea..better not to explain i understand..one more thing i wanted to ask is, even if we turn on "prevent unlock" switch in wp7rt, are there still any other ways that the device can be relocked by MSFT??Thanks for ur reply..

Prahlad Varada
 
You must log in or register to reply here.

Similar threads

iridium21
ChevronWP7 Unlocker & Cert download - *here* + video tutorial
Replies
1K
Views
969K
G
GoodDayToDie
Heathcliff74
[CAB] Official WP7 Updates List up to WP 7.8 + ALL LANGUAGES complete + OEM updates
Replies
2K
Views
1M
M
mike_san
Cotulla
[DFT][Updated!#3] HSPL / RSPL for HTC WP7 First Generation
Replies
1K
Views
785K
spideyngo
spideyngo
Heathcliff74
  • Locked
[XAP] WP7 Root Tools 0.8 for MANGO
Replies
338
Views
265K
D
dazza9075
tom_codon
[Updated 2/7/2011]Tom XAP Installer v1.2 with multiple xaps install support
Replies
238
Views
528K
ch3mn3y
ch3mn3y

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 107
    Heathcliff74
    Heathcliff74
    NEW: I created new unlocks for (almost) all Samsung WP7 devices, including 2nd generation devices like Focus S and Omnia W! More info here. Guides will be updated as soon as possible!

    In Mango there is a new type of lock: INTEROP-LOCK

    Normal WP7 apps are Silverlight or XNA apps. They run managed code. Some apps also use native code (C++), but Microsoft restricts the use of native code to certain selected partners, because native code is more sensitive to errors and need higher care. But there are no real boundaries for running native code on WP7 devices, as I explained here. If your device is AppHub- or ChevronWP7-unlocked, you can run the apps with native code. For example the Version and Language tool from this thread uses native code, but it can run on normal unlocked devices. But there are also apps that need access to drivers on your phone. These apps need the Interop Services capability. This capability is only allowed to software from Microsoft and from OEM's. But many homebrew apps need this capability too, to get higher privileges for tweaking your device. The new Interop Lock means that this capability is locked down. So, even when you have a legit AppHub-unlock or ChevronWP7 Labs unlock, you still can't side-load apps that need higher privileges to run. For example WP7 Root Tools needs this capability to run. But when your device is INTEROP-LOCKED it will show error 0x81030120 when you try to deploy it to your device.

    Contable and Marvin_S did research on it and found that the registry setting MaxUnsignedApp is responsible for the INTEROP-LOCK. I did more research and I identified the code that is responsible for this check. In fact, if you have the MaxUnsignedApp value set to 300 or higher, your interop will be unlocked. The value of MaxUnsignedApp is determined by the type of developer-unlock you have. A normal AppHub account will have it set to 10 and a student account will have it set to 3. So a value of 300 or higher is not a realistic value for a normal developer account. It is probably only set to this value for Microsoft employees and OEM developers.

    Until now, the only way to do an INTEROP-UNLOCK for MANGO meant that you have to downgrade to NoDo first, then prepare your device by loading provxml files to your device, upgrade to MANGO and then use OEM tools to execute the provxml files and do the necessary unlocks. But that is a lot of work and for some devices not even possible, because there are simply no ROM's available.

    So I wanted to allow people with MANGO shipped on their device and using a legit developer unlock, to use WP7 Root Tools and other MANGO-compatible homebrew apps.

    I have developed a method to do this. I have a Samsung Omnia 7 and it works on my device. It should also work on Samsung Focus. ATLien68 brought to my attention that it is also possible for LG devices to do an Interop Unlock on Mango. So I created a guide for LG too.

    This only works on devices that already have a developer-unlock!

    DISCLAIMER

    I will not take any responsibility for any damages caused directly or indirectly from using the software-package or the instructions. Read the instructions thoroughly and proceed carefully!

    BACKUP

    You may want to make a backup of your device in case something goes wrong. This is what I do to make a backup:
    1. Download hx4700 Killer's WP7 Backup version 1.6 from this thread. Note that I use version 1.6, not 1.8.
    2. Download this archive. It is from xboxmod's WP7 Update Cab Sender thread.
    3. Use Zune 4.8 final (4.8.2345.0).
    4. Setup-UpdateWP 4.8 beta 3 from the archive.
    5. Extract the "Tools" folder from the archive.
    6. Setup the Backup tool to reference Zune.exe and the UpdateWP.exe in the extracted Tools-folder.
    7. Create your backup. The backup app will allow you to archive any previous backup. Your phone will restart and go in Download-mode. When the backup is finished, the app will tell you to disconnect. Even though your phone says you still can't disconnect, you can safely disconnect the phone and it will restart.

    SAMSUNG

    WARNING!! The new Samsung Omnia 7 KK2 update will prevent the use of Interop Unlock and WindowBreak! This Samsung Firmware update is accompanied with the 7.10.8107.79 if you update with Zune. Other Samsung devices are probably affected too, but I don't know if the update code for those device is KK2 too. If you are already unlocked, this update will not relock your device. If you want to keep the possibility of Interop Unlock open, then use the method described in this thread to update to 7.10.8107.79 without updating to Samsung KK2!

    1. Download the software package Interop Unlock by Heathcliff74 v2.xap.
    2. Connect your phone to your desktop computer, running Zune.
    3. Check for updates and let all pending updates install.
    4. Uninstall the Samsung Diagnosis app.
    5. Dial ##634# to install the latest Samsung Diagnosis app.
    6. Use any Windows Phone App Deployment tool to install Interop Unlock by Heathcliff74 v2.xap.
    7. Run the Samsung Diagnosis app. You should see version 1027, 1122 or 0103 at the top. The version is the compile-date without year. So version 0103 is actually newer than 1122. Versions from before 2010/10/27 do not seem to work. If you have such an old version of the Diagnosis App you need to run the latest Samsung Update (Mango Drivers) from Zune or update manually as described here. After the update you need to perform step 4 and 5 again.
    8. In the Diagnosis app dial: *#9908#
    9. Select "Heathcliff74 Interop Unlock"
    10. Tap "Save", tap "Close" and exit the Diagnosis app. You are now unlocked, but your 3G settings are screwed (side-effect).
    11. To repair your 3G settings use one of these six options:
    ---- 11.1. NEW: This option only works on 1st generation Samsungs. Download "Samsung Repair 3G by Heathcliff74.xap" and run it on your phone. It should work immediately.
    ---- 11.2. Use the Diagnosis app (thanks to Vintage144 for the tip).
    -------- 11.2.1. Open up the Diagnosis app.
    -------- 11.2.2. Dial this to enable autoconfigure sim setting: *#94765# (or dial 40*047#3, it's the same - more diagnosis codes here)
    -------- 11.2.3. It will ask you to restart the device. Confirm that.
    ---- 11.3. If your device is not locked to a specific operator, you can use the Samsung Network Profile app (for 1st generation) or Wireless Manager (for 2nd generation)
    -------- 11.3.1. Uninstall the Samsung Network Profile / Wireless Manager app.
    -------- 11.3.2. Download and install the latest version of the Samsung Network Profile / Wireless Manager app from the Marketplace.
    -------- 11.3.3. Open the Samsung Network Profile / Wireless Manager app.
    -------- 11.3.4. Select a different Network Operator.
    -------- 11.3.5. Now Select your own Network Operator again.
    -------- 11.3.6. Exit the Network Profile / Wireless Manager app.
    ---- 11.4. Use lyriquidperfection's Samsung Tools (probably only works on 1st generation Samsungs).
    -------- 11.4.1 Download the Samsung Tools here.
    -------- 11.4.2. Deploy the tools to your phone (which is now possible due to Interop-Unlock)
    -------- 11.4.3. Start "Samsung Tools"
    -------- 11.4.4. Select "Run ADC"
    -------- 11.4.5. Tap "Reboot"
    ---- 11.4. Use WP7 Root Tools for manual repair (I will add an option to repair 3G in the next version, currently only works on 1st generation Samsungs).
    -------- 11.5.1. Download WP7 Root Tools here.
    -------- 11.5.2. Deploy WP7 Root Tools to your phone (which is now possible due to Interop-Unlock).
    -------- 11.5.3. Open WP7 Root Tools.
    -------- 11.5.4. In the registry editor navigate to Local Machine\System\AutoDataconfig.
    -------- 11.5.5. Set value ConfigurationStatus to 0 and set value RunADC to 1.
    -------- 11.5.6. Restart your phone.
    ---- 11.6. Use TouchXperience Advanced Config Tool 1.4 (thanks to Ludovic B. for the tip, probably only works on 1st generation Samsungs).
    -------- 11.6.1. Download Advanced Config Tool here.
    -------- 11.6.2. Deploy Advanced Config Tool to your phone (which is now possible due to Interop-Unlock).
    -------- 11.6.3. Open Advanced Config Tool.
    -------- 11.6.4. Go to "Tweaks" and scroll down.
    -------- 11.6.5. Check "Run Auto Data Config".
    -------- 11.6.6. Scroll down and tap "Reboot phone".

    Resolve Samsung connection problems

    Thanks for this info to lulede!!

    A lot of Samsung owners have complained here about connection problems. They blamed Interop Unlock, but apparently this has more to do with enabling "Internet Connection Sharing" than with "Interop Unlock". You should be able to recover the connection, apply this:

    1. Start Diagnosis App> *#32489#
    2. Tap "Back" 2 times to go back to Phone Control
    3. Choose: [7] Network Control
    4. Choose: [1] GFC
    5. Choose: [3] Setting Cancellation

    Wait for it to say success, then reboot.

    LG

    1. Install the MFG app by dialing: ##634#
    2. Open the MFG app. The password is: appmfg#*#
    3. Go to Engineer Menu -> Other Settings -> Edit Registry
    4. Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
    5. Set your input path to "\Comm\Security\LVMod"
    6. Set your input key to "DeveloperUnlockState" and set to DWORD.
    7. Leave input data box empty and tap "SET".
    8. The output should be 0.
    9. Now enter "1" in the inputbox and tap "SET".
    10. The output should be 1.
    11. Set your input path to "\Software\Microsoft\DeviceReg"
    12. Set your input key to "PortalUrlProd" and set to DWORD.
    13. Clear the input data box and hit "SET".
    14. Output result should be "0".
    15. Set your input key to "PortalUrlInt" and set to DWORD.
    13. Clear the input data box and hit "SET".
    14. Output result should be "0".
    15. Set your input path to "\Software\Microsoft\DeviceReg\Install"
    16. Set your input key to "MaxUnsignedApp" and set to DWORD.
    17. Clear the input data box and hit "SET".
    18. The output should be 0.
    19. Now enter "2147483647" in the inputbox and tap "SET".
    20. Output result should be "2147483647".

    HTC

    I didn't do this hack for HTC's all by myself. This hack is a joint collaboration of XDA members. A valuable part of this hack was done by Kounadisk and GoodDayToDie. Thanks to them!
    Also thanks to CeesHeim for arranging a hand-on HTC device for me to test with.

    This hack need the HTC Connection Setup app. HTC Arrive can't run the HTC Connection Setup app. Therefore this hack will not work on HTC Arrive. Verizon Wireless Trophy users should follow slightly different steps. Scroll down for instructions that are specifically meant for Verizon Wireless Trophy.

    Developer unlock can be either AppHub or Chevron Labs.

    Important note: From what I understand, HTC has released *two* OEM updates after Mango. The first one was released together with Mango and included the first Mango drivers from HTC. I will call those the HTC Mango Drivers v1. The second one is being rolled out now and is by other people referred to as the "tethering update". This update also contains updated drivers. I will call those the HTC Mango Drivers v2. If you have a 1st generation HTC device, you may or may not have installed the HTC Mango Drivers v1 or v2. If you are on Mango with Interop Lock, you may need this hack to perform Interop Unlock. The HTC Mango drivers have extra protection which will reject the configuration settings for Interop Unlock. The current hack for HTC defeats the extra protection in HTC Mango Drivers v1. But in HTC Mango Drivers v2 there is an even more advanced protection, which is a breaking change that causes the Interop Unlock to fail. The second generation HTC devices (HTC Radar / HTC Titan) come with the HTC Mango Drivers v2 preloaded. So currently only First generation HTC Mango devices can only be Interop Unlocked if there are no HTC Mango updates or only HTC Mango Drivers v1. So the first generation HTC devices that also have the HTC Mango Drivers v2 and the second generation HTC devices can currently not be Interop Unlocked. I am looking for an exploit in the HTC Mango Drivers v2. If you have a first generation HTC device and you have the HTC Mango Drivers v2 and you still have a backup from before that last update, you can restore that backup and apply Interop Unlock. You can update to the latest drivers again and preserve the Interop Unlock.

    There are also users with 1st generation HTC devices only HTC Mango Drivers v1, who report that this is not working. This can be fixed. These people should read the notes at the end of this guide!

    1. Make sure you have a backup of your device (scroll up for instructions)
    2. Make sure you hava a backup of your backup (No kidding! Zune may overwrite the backup you made. Here's the backup: %LocalAppData%\Microsoft\Windows Phone Update)
    3. Download this attachment to your PC: HTC Interop Unlock.xap
    4. Connect your device to a PC running Zune and install the xap-file using any xap-deploy-tool. You don't need to start the app. If it starts automatically, you can close it right away.
    5. Download and install HTC Connection Setup on your HTC device (if you don't have it already)
    6. Start HTC Connection Setup.
    7. Tap the three dots in the down-right corner of your screen and tap "manual select".
    8. Tap on the country. This will open a list of countries you can select.
    9. In the country-list scroll to "Interop Unlock" and select it.
    10. Tap on the round ok-button at the bottom of your screen and wait until connection setup is finished.
    11. Tap "Done" to exit the app.
    12. Now open "Connection Setup" again. This is to prevent Connection Setup opening when you restart your device.
    13. It will show you your current operator.
    14. Tap on the round ok-button at the bottom of your screen and wait until connection setup is finished again.
    15. Tap "Done" to exit the app.

    Note for people who don't have this working: I changed the order of the steps in the guide a little bit. If you have attempted to deploy other hacks using HTC Connection Setup (GoodDayToDie version for Interop Unlock or something else) it could be that the files that were deployed are blocking this new hack. You should try to uninstall HTC Connection Setup, restart your phone and then follow the the steps in the guide again (with changed order). Hope that works for you.

    Steps for Verizon Wireless Trophy users (thanks to LiFePo4 for modified instructions):

    1. Make sure you have a backup of your device (scroll up for instructions)
    2. Make sure you have a backup of your backup (No kidding! Zune may overwrite the backup you made. Here's the backup: %LocalAppData%\Microsoft\Windows Phone Update)
    3. Download this attachment to your PC: HTC Interop Unlock.xap
    4. Connect your device to a PC running Zune and install the xap-file using any xap-deploy-tool. You don't need to start the app. If it starts automatically, you can close it right away.
    5. Download and install HTC Connection Setup on your HTC device (if you don't have it already)
    6. Go to Settings / Cellular and set Mode to GSM. Exit back to main screen and wait for data connection to go away (there will be a little box with the crossed circle in the upper left where connection status is shown).
    7. Start HTC Connection Setup.
    8. Tap the three dots in the down-right corner of your screen and tap "manual select".
    9. Tap on the country. This will open a list of countries you can select.
    10. In the country-list scroll to "Interop Unlock" and select it.
    11. Tap on the round ok-button at the bottom of your screen and wait until connection setup is finished.
    12. Make sure you perform step 12 and 13 directly after each other! Tap "Done" to exit the app. This will take you back to the applist.
    13. Quickly Uninstall HTC Connection Setup and never allow it to run again.
    14. Power off and back on phone.
    15. Go back to Settings / Cellular and set Mode to CDMA. Exit to main screen and verify 3G is there.
    16. Go back to Settings / Cellular and set Mode to Global. Exit.
    17. Uninstall the HTC Interop Unlock.xap

    This method does not loose 3G (HTC connection setup really does no good with the CDMA network so it used only once for Interop Unlock; if it ever runs a second time it screws up the CDMA data connection).

    Note to people who have trouble with their HTC Connection Setup restarting automatically on every reboot of the device, or having problems with their data connection:
    Normally the Connection Setup should be restored automatically with this hack. But if something goes wrong, it is possible that your HTC Connection Setup is left in a unservicable state. I that case follow these steps:

    1. Download and deploy the attachment: Repair HTC CS.xap
    2. Run Connection Setup.
    3. Apply settings of your operator.
    4. Uninstall Repair HTC CS.

    That should do it.

    Note to everybody: Please report success and failure, including all device specs and abnormalities (errors etc)! I want to improve the guide as much as possible!

    Have fun with homebrew now! :D
    Heathcliff74
    View
    10
    Heathcliff74
    Heathcliff74
    Nokia testers wanted!!

    I hope to have found an exploit for Nokia devices! Remember: this is not yet confirmed working! And you should make a backup of your device in advance! (See opening post for instructions). Use this at your own risk. I won't take any responsibility for any damage caused directly or indirectly by following these instructions or using the app!

    As soon as this method is confirmed to work, I will add it to the opening post.

    This will only work (hopefully) on Nokia devices that are already developer-unlocked (AppHub or Chevron Labs)!

    To do an attempt for Interop Unlock on Nokia's please follow this guide carefully:

    1. Make sure you made a backup of your device (see opening post of this thread for instructions)
    2. Install Nokia Network Setup from the Marketplace (Nokia zone)
    3. Download this attachment: Nokia Interop Unlock by Heathcliff74.xap
    4. Deploy that file to your Nokia device using any Xap Deployer. It is not necessary to start the unlock app. If it starts automatically you can exit the app immediately.
    5. Launch the Nokia Network Setup app. After a couple of seconds it should show "Interop Unlock by Heathcliff74".
    6. Exit the Network Setup app.
    7. Uninstall "Nokia Interop Unlock" app and "Nokia Network Setup" app. If you want you can reinstall the Network Setup app again later on.

      That should be it. To test it, you may want to try to deploy Advanced Config 1.5.

      Let me know if it works!!

      Ciao,
      Heathcliff74

    View
    9
    Heathcliff74
    Heathcliff74
    It seems that the second generation HTC devices will be getting an update very soon. If you'd like to keep your chances of getting Interop Unlock as high as possible I suggest you don't update your device yet. I'm working hard on the HTC Mango drivers v2. I can't tell you *if* or *when* I can make Interop Unlock for it, but I'm making progress.

    Ciao,
    Heathcliff74
    View
    6
    Heathcliff74
    Heathcliff74
    I created new unlocks for (almost) all Samsung WP7 devices, including 2nd generation devices like Focus S and Omnia W! More info here. Guides will be updated as soon as possible!

    Have fun!
    Heathcliff74
    View
    6
    Heathcliff74
    Heathcliff74
    snickler said:
    No link for Interop-Unlock xap :)
    Click to expand...
    Click to collapse

    I added it again. My browser was behaving strangely. It got lost somehow. :rolleyes:
    View

New posts