[GUIDE] Juopunutbear S-OFF NO HTCDEV UNLOCK | ROOT (1.2x HBOOTS)--NEW: ONE CLICK ROOT

[stormster]

Re root again
And do the unlock using method #2 that is the best way to sim unlock
Also as you are on 1.27 hboot you can't use method #2 directly.. Go to the last pages of the thread.. And there an alternative way of doing method #2 was written use that for unlock

Sent from my Nexus 7 using xda premium

hey mate,
i have tryed rooting again... either your way or with simtoolkit... still the same... How to re-root again ? Using what ? Thanks for any help mate. everytime in cmd or whatever i try it says device not found.

 

[rzr86]

Re root again
And do the unlock using method #2 that is the best way to sim unlock
Also as you are on 1.27 hboot you can't use method #2 directly.. Go to the last pages of the thread.. And there an alternative way of doing method #2 was written use that for unlock

Sent from my Nexus 7 using xda premium

http://forum.xda-developers.com/showthread.php?t=1232107&page=54 (post#531)

 

[stormster]

Re root again
And do the unlock using method #2 that is the best way to sim unlock
Also as you are on 1.27 hboot you can't use method #2 directly.. Go to the last pages of the thread.. And there an alternative way of doing method #2 was written use that for unlock

Sent from my Nexus 7 using xda premium

http://forum.xda-developers.com/showthread.php?t=1232107&page=54 (post#531)

Hello
I have found that post, but I still have problem with the root. I have the superuser apk installed, but no root... Thats what I am asking... If I relock and restock the rom with RUU and then re root with recovery, s off, etc... will it work ? or if i factory restore will it return all values to default ?
Thank you

 

[rzr86]

Hello
I have found that post, but I still have problem with the root. I have the superuser apk installed, but no root... Thats what I am asking... If I relock and restock the rom with RUU and then re root with recovery, s off, etc... will it work ? or if i factory restore will it return all values to default ?
Thank you

flash this zip from recovery
http://download.chainfire.eu/324/SuperSU/UPDATE-SuperSU-v1.30.zip
see then if you have root access

 

[stormster]

flash this zip from recovery
http://download.chainfire.eu/324/SuperSU/UPDATE-SuperSU-v1.30.zip
see then if you have root access

edit:
ok i found how to bypass the red triangle, but i cannot flash it says verify failed and only reboot option is given

 

[rzr86]

edit:
ok i found how to bypass the red triangle, but i cannot flash it says verify failed and only reboot option is given

red trinagle?
did you even flashed a custom recovery?
if yes which one?

 

[stormster]

red trinagle?
did you even flashed a custom recovery?
if yes which one?

Its stock recovery, I havent flashed recovery (which now i regret..)

 

[rzr86]

Its stock recovery, I havent flashed recovery (which now i regret..)

only step 2 from here
http://forum.xda-developers.com/showthread.php?t=1631861
then from 4ext flash the supersu.zip

 

[stormster]

only step 2 from here
http://forum.xda-developers.com/showthread.php?t=1631861
then from 4ext flash the supersu.zip

Well it stays on <waiting for device> in cmd in windows and nothing happens.. As i did exactly what it was said...

 

[rzr86]

Well it stays on <waiting for device> in cmd in windows and nothing happens.. As i did exactly what it was said...

use usb 2.0 ports
do you have htc drivers installed?
have you enabled usb debugging mode from settings?
does your bootloader screen says fastboot usb?

 

[stormster]

use usb 2.0 ports
do you have htc drivers installed?
have you enabled usb debugging mod from settings?
does your bootloader screen says fastboot usb?

I have done all above except the usb 2.0, it was on 3.0 but it was working last night...
I changed it on 2.0 and still it stays on bootloader menu
FASTBOOT USB

BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN

and on cmd again waiting for device

I noticed that the thread you gave me is for S-ON, I am S-OFF is it a problem ?

 

[rzr86]

I have done all above except the usb 2.0, it was on 3.0 but it was working last night...
I changed it on 2.0 and still it stays on bootloader menu
FASTBOOT USB

BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN

and on cmd again waiting for device

really strange
ok do it from here
http://forum.xda-developers.com/showthread.php?t=1472298
step 1 only
it has 3 options to flash 4ext.start with the third one
before flashing check md5 sums

edit:nope it doesn't matter.flashing a recovery is the same in any case
the whole guide is for flashing roms with S-ON
you don't need the whole guide just only step 2(flashing a recovery)

 

[stormster]

really strange
ok do it from here
http://forum.xda-developers.com/showthread.php?t=1472298
step 1 only
it has 3 options to flash 4ext.start with the third one
before flashing check md5 sums

edit:nope it doesn't matter.flashing a recovery is the same in any case
the whole guide is for flashing roms with S-ON
you don't need the whole guide just only step 2(flashing a recovery)

ok so i downloaded the third option and the md5 checker, but when i tryed to verify it said The Codes Do Not Match...
Shall i proceed ?

 

[malybru]

ok so i downloaded the third option and the md5 checker, but when i tryed to verify it said The Codes Do Not Match...
Shall i proceed ?

Hi,

NO!.
Md5 must match.
Download again and check again.

 

[stormster]

Hi,

NO!.
Md5 must match.
Download again and check again.

5 downloads and still no match
damn...
ok so i clicked on create md5 and pointed to the image i have downloaded and then verified it and it said The Codes Match
but i am not sure it is the right thing

 

[malybru]

5 downloads and still no match
damn...

Hi,

Are you sure you are using the checker correctly?
Maybe,look for a different checker.
There are many free ones.
I use THIS ONE

 

[katak.bali]

You need to manually format the sdcard
You can do it on computer using sd formatter program
Or do it from 4EXT recovery (by installing it)



Sent from my Nexus 7 using xda premium

thank you man,
it work now

 

[stormster]

Hi,

Are you sure you are using the checker correctly?
Maybe,look for a different checker.
There are many free ones.
I use THIS ONE

Ok so with your MD5 checker it confirmed that the downloaded file is correct. Which means I can flash it safely right ?
Thanks mate. Will post what happened

---------- Post added at 05:46 PM ---------- Previous post was at 05:27 PM ----------

Hi,

Are you sure you are using the checker correctly?
Maybe,look for a different checker.
There are many free ones.
I use THIS ONE

Well I am stuck yet again on adb cmd - waiting for device
I am in bootloader with FASTBOOT USB and still nothing...
I needed to get CID number but i cant...

 

[rzr86]

Ok so with your MD5 checker it confirmed that the downloaded file is correct. Which means I can flash it safely right ?
Thanks mate. Will post what happened

---------- Post added at 05:46 PM ---------- Previous post was at 05:27 PM ----------



Well I am stuck yet again on adb cmd - waiting for device
I am in bootloader with FASTBOOT USB and still nothing...
I needed to get CID number but i cant...

no
actually put the pg58img.zip in the root of your sdcard
then boot your device into bootloader
from there it will recognize the zip and it will ask you to do the update
that's why i told you to start with option three
it doesn't require pc

 

[ganeshp]

Ok so with your MD5 checker it confirmed that the downloaded file is correct. Which means I can flash it safely right ?
Thanks mate. Will post what happened

---------- Post added at 05:46 PM ---------- Previous post was at 05:27 PM ----------



Well I am stuck yet again on adb cmd - waiting for device
I am in bootloader with FASTBOOT USB and still nothing...
I needed to get CID number but i cant...

Hmm
What's happening here?
adb won't work on bootloader/fastboot period
Can you describe me what you are trying to do?

Edit: it seems you have problem with rooting where the one click root tool is not working right?
And to root your device you are trying to flash su zip file.. Which requires custom recovery

So to flash custom recovery
You need to use fastboot command only (and only fastboot command works when the device on bootloader)

Now copy the recovery.img you have downloaded to your adb/fastboot folder on the PC

And open terminal from there
And type this

fastboot flash recovery recovery.img

That will flash the recovery


Sent from my Nexus 7 using xda premium