Sounds like a permanent brick. If you ever attempted to roll back to an older version of firmware that would’ve tripped antirollback
Sent from my iPhone using Tapatalk
[Guide] LG V10 Stock Firmware (Go Back to Stock) KDZ & TOT Method
- Thread starter hyelton
- Start date
Sounds like a permanent brick. If you ever attempted to roll back to an older version of firmware that would’ve tripped antirollback
Sent from my iPhone using Tapatalk
I've taken it to a service shop to flash it with Octopus box, that guy tried to flash it with lgh90120c firmware but he bricked it with just a black screen then i got back and flashed it with H90021w Unbrick Qfil with Qpst. Phone now boots in firmware update and fastboot mode nothing else.
I made a rawprogram.xml file with LGH90130d kdz firmware and flashed the phone with Qpst it was flashed but then no response as usual. I need a solution. Don't know what else I need to do.
---------- Post added at 12:50 PM ---------- Previous post was at 12:21 PM ----------
no didn't try to roll back to any older version but i tried to update it with a newer version using LGUP. When my phone didn't response after flash has been done then I noticed that I flashed the wrong firmware. I got the file from lg-firmware.com site which was LGH90130d.
I made a rawprogram.xml file with LGH90130d kdz firmware and flashed the phone with Qpst it was flashed but then no response as usual. I need a solution. Don't know what else I need to do.
---------- Post added at 12:50 PM ---------- Previous post was at 12:21 PM ----------
no didn't try to roll back to any older version but i tried to update it with a newer version using LGUP. When my phone didn't response after flash has been done then I noticed that I flashed the wrong firmware. I got the file from lg-firmware.com site which was LGH90130d.
Can this refurbished model be upgrade to Nougat? If I install other firmware will hardbrick? Can someone help me? In LGUP says: "H961n10d".
Can any one provide me qfil firmware of h961n hongkong mobile....please......
It needs a password to unzip
What's the password?
---------- Post added at 06:47 AM ---------- Previous post was at 06:43 AM ----------
What's the password?
What's the password?
---------- Post added at 06:47 AM ---------- Previous post was at 06:43 AM ----------
Here are all the current KDZ files for flashing Your LG V10 Back to Stock!
Will Be adding Firmwares as I get them, Give me a little time to fix up the guide a little as it WILL be the SAME method as the G2 and G Pro, G Flex, Etc. KDZ's & TOT's HERE
NOTICE! - IF you download fails or does not download all the way USE A DOWNLOAD MANAGER!, Files that are usually over 1GB browsers have issues downloading them especially if you have a slow connection.
First Off Not Responsible if you flash the wrong one!!!!
_____________________________________________________________________________________________________________________________
LGUP Method flashes both KDZ & TOT files:
Thanks to @shakeyabooti for LGUP!
Download LGUP from HERE
Install the file with the DLL name in them first and then LGUP_Install_Ver_1_14_3 Then copy the folder "common" to C:\Program Files (x86)\LG Electronics\LGUP\model (this should resolve unknown error)
Make sure you have downloaded the required KDZ file MM or LP
Open LGUP on your computer "make sure your phone is plugged in"
ARE YOU HAVING TROUBLE WITH LGUP NOT SEEING YOUR MOBILE?
Try this....... take the back off your mobile so you can get at the battery. Connect your mobile via USB. Start LGUP, if it does not see your phone DO NOT DISCONNECT, DO NOT RESTART OR TURN OFF LGUP. Take out the battery and then put it back in.......let the phone restart on its own. LGUP should now see it.
LG Drivers: All Others - HERE Verizon - HERE
TO DO A FULL WIPE AND INSTALL MM - Open the LGUP on your computer. FILE PATH point it towards the MM KDZ.
IMPORTANT!!!!!!! shut down LGUP!
Now open LGUP again - you will notice that the MM KDZ will still be showing in the FILE PATH section. Select REFURBISH and make sure BIN file is ticked. Press Start. Make cup of tea and be patient
TO GO BACK TO LP FROM MM - Open LGUP on your computer, click on FILE PATH and point it towards your LP KDZ. Close LGUP and re-open LGUP. Make sure you select REFURBISH this will do a FULL wipe, tick BIN file. Press Start. Make cup of tea and be patient
Video Guide: (Thanks to @KiaTheKing
https://www.youtube.com/watch?v=iPKcuYwDoxY
_________________________________________________________________________________________________________________________________________________________________
How to flash ROM KDZ Method
The Files are Hosted on my server for fast speeds! Most if not all NEEDED KDZ files are on my Server
How to flash ROM KDZ Method
First off I`d like to THANK @quangnhut123 for making a new way & easy way to flash the KDZ Method!!
1). Download all The Files Below!
1) Firmware Files - HERE!
2) Download LG Drivers - LG Drivers Here - 10.9 Mb
2.1)Verizon Drivers (Verizon Only)LG_VZW_United_v2.22.0.exe - 7.8 Mb
3) Download LG Flash Tool 2014 tool and extract - LG_Flash_Tool_2014.zip - 3.1 Mb
4) Enter to Download Mode and plug USB into your PC
5) Run LGFlashTool2014.exe and do as following pictures :
(If you cannot run LGFlashTool2014.exe, please install Visual C++ Runtime Library) - Download HERE
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
No need to choose desired language, it automatically change to English as a default setting.
Wait until 100% to complete !
REMEMBER if you get Bootlooping after flashing perform a factory hard reset!
Instructions Here: https://support.t-mobile.com/docs/DOC-7590
_______________________________________________________________________________________________________________________________
2015 (updated with pictures) TOT Method!
RETURN TO STOCK TOT METHOD!, AT&T, T-Mobile, Sprint, Verizon, & a The few International TOT`s that are available
How to Flash YouTube Video:
1. Download Everything!
1.1) Download Both Stock Image & DLL File – Download Here
1.2) Download LG FlashTools V1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
1.3) Download Drivers (Any LG Phone) - Here (Verizon Only) – Here
1.4) Megalock DLL File - Megalock.dll Download
Install:
2. Install LG Drviers
3. Install Flashtool (Don’t run it yet)
4. Extract the TOT file from the Zip
5. Copy MegaLock.dll file to C:\LG\LGFlashtool (This might be a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file)
6. Power off your Device & or pull battery (G3),(G Pro),(G Flex)
7. Press and hold the Vol UP Key and plug in the USB cable to your phone you should now see “Firmware Update/Download Mode” and be in Download mode.
8. Open up Device Manger on your PC
8.1) Click on ports and double click LGEModem
8.2) Go to Port Settings Tab and click Advanced
8.3) Change COM Port to COM41 and click Okay.
8.4) After this you may need to rereboot your phone back into download mode.
9. Run LG Flashtool as Administrator
10. Select Manual Mode at the top
11. Click The DLL Box and choose the DLL file from Above meant for your device
12. Click the S/W box and select the firmware file with the .tot extension, Then Click OK when done.
13. Now Click the Yellow Arrow Button at the top left, The Firmware install will be triggered
14. You may need to unplug/replug phone before Firmware install will start (If it does nothing after clicking the yellow button
15. Should take anywhere between 4-8 Minutes, When its done your phone should reboot
16. LG G3 Only, After reboot you will be presented with a Factory reset screen, Just pull battery and put it back in and it should boot right up!
Do NOT Close the FlashTool Window during firmware update.
99% of the time FlashTool will FAIL after 85% anything after 85% is just your phone rebooting so your safe
_______________________________________________________________________________________________________________________________
2014 TOT Method (Old/Outdated)
_______________________________________________________________________________________________________________________________
Remember if you have bootloop or stuck on LG Logo after flashing make sure you FACTORY RESET!
Extra Important Info:
To Fix ANY Driver issues make sure you reboot your computer after removing and then re-install again, Also try different USB ports or USB cable or try another PC.
Also try this for any driver issues: http://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
REMEMBER if you get Bootlooping after flashing perform a factory hard reset!
Instructions Here: https://support.t-mobile.com/docs/DOC-7590
My Links are ALWAYS hosted on MY servers for NO Downtime! If My site does NOT have what your looking for PM me or post what you want and I will try and get it for you
Feel Free to support me by helping with Server Costs, Late night Beer, and Coffee if you feel my work has helped youThank you!
Thank you so much!
Donations: @avinash Rajkumar, @penone1130, @nilesd
What's the password?
Password to what? The website doesn’t have a password
Sent from my iPhone using Tapatalk
Opening unzipped files
The beginning of this thread was posted kdz zipped files that when opening it requires a password. fortunately I guessed the password from another thread.
Hi bro hyelton,
I read all your thread, because really LG in these models, it is a controversy and it is a terminal garbage for all the possible details that was to be a like bricked!
Question!
How do you know, when the “Anti-rollback Security System” is active, how can you check this before flashing any ROM Firmware in these Series of Terminals?
According to what I have been able to understand from all this and I want you to rectify if I am wrong about something regarding these LG series (Model: LG-H9XX): :fingers-crossed:
1. You must pre-flash the New ROM and even after flashing, you will a Factory Hard Reset. (To eliminate old cache that can intervene and cause errors in the functions of some APKs).
2. If you have an LG-H9XX, and it is with the Android 5.1.1 Lollipop´ ROM, you can upgrade it to the Android 6.0 Marshmallow version with the LGUP or UPPERCUT Softwares. But if you are already in the Masmallow 6.0, you will have to die with that ROM for life, since the Anti-rollback protection will be activated, this means that you can never return to the previous version, it may also be the case that some functions such as Fingerprint in Security, do not work very well. Also, do not pick up a signal or that it is blocked when you insert your operator's SIM card, after flashing to the Massmallow 6.0 version. This is at your risk! That is, this entails many risks and it is NOT recommended to do it unless you need it!
Note! If you have an Android Marshmallow Operating System, you CANNOT use LGUP or UPPERCUT Software, it will give update errors. Only Lollipop or other system... :fingers-crossed:
3. If you are in the Marshmallow 6.0 version with the problems described above, the entire phone will be lost and the only way to recover it is to change the complete Board Replacement of the LG-H9XX.
4. If you are wrong to select the model of the ROM when you are going to upgrade your Lollipop Stock 5.1.1 to Marshmallow 6.0 you have turned your phone into a brick, since there is no going back, you have to buy the new Board Replacement. Please note that updates can be automatic from the same Terminal to LG server!
5. If your Mobile on the outside claims to be an LG-H9XX but actually inside the Terminal it has a Verizon VS990 Board with a deceptive Operating System (scammed and emulated) of a ROM with the LG-H9XX Operating System of the AT&T, to deceive and scam people and to top it all Upgraded your Mobile to a new version of the H9XX of AT&T. You will lose your Terminal for a lifetime, since you are installing a ROM Firmware (Update) that does NOT really correspond to your Board and the Protection Antirollback is activated!
SUMMARIZING!
DO NOT buy LG of these series and DO NOT upgrade to a higher version or to a Custom ROM, if your Terminal works well as it is. The series of LG-H9XX is very S h i_ ....
Sorry my English ok.
Here are all the current KDZ files for flashing Your LG V10 Back to Stock!
Will Be adding Firmwares as I get them, Give me a little time to fix up the guide a little as it WILL be the SAME method as the G2 and G Pro, G Flex, Etc. KDZ's & TOT's HERE
NOTICE! - IF you download fails or does not download all the way USE A DOWNLOAD MANAGER!, Files that are usually over 1GB browsers have issues downloading them especially if you have a slow connection.
First Off Not Responsible if you flash the wrong one!!!!
_____________________________________________________________________________________________________________________________
LGUP Method flashes both KDZ & TOT files:
Thanks to @shakeyabooti for LGUP!
Download LGUP from HERE
Install the file with the DLL name in them first and then LGUP_Install_Ver_1_14_3 Then copy the folder "common" to C:\Program Files (x86)\LG Electronics\LGUP\model (this should resolve unknown error)
Make sure you have downloaded the required KDZ file MM or LP
Open LGUP on your computer "make sure your phone is plugged in"
ARE YOU HAVING TROUBLE WITH LGUP NOT SEEING YOUR MOBILE?
Try this....... take the back off your mobile so you can get at the battery. Connect your mobile via USB. Start LGUP, if it does not see your phone DO NOT DISCONNECT, DO NOT RESTART OR TURN OFF LGUP. Take out the battery and then put it back in.......let the phone restart on its own. LGUP should now see it.
LG Drivers: All Others - HERE Verizon - HERE
TO DO A FULL WIPE AND INSTALL MM - Open the LGUP on your computer. FILE PATH point it towards the MM KDZ.
IMPORTANT!!!!!!! shut down LGUP!
Now open LGUP again - you will notice that the MM KDZ will still be showing in the FILE PATH section. Select REFURBISH and make sure BIN file is ticked. Press Start. Make cup of tea and be patient
TO GO BACK TO LP FROM MM - Open LGUP on your computer, click on FILE PATH and point it towards your LP KDZ. Close LGUP and re-open LGUP. Make sure you select REFURBISH this will do a FULL wipe, tick BIN file. Press Start. Make cup of tea and be patient
Video Guide: (Thanks to @KiaTheKing
https://www.youtube.com/watch?v=iPKcuYwDoxY
_________________________________________________________________________________________________________________________________________________________________
How to flash ROM KDZ Method
The Files are Hosted on my server for fast speeds! Most if not all NEEDED KDZ files are on my Server
How to flash ROM KDZ Method
First off I`d like to THANK @quangnhut123 for making a new way & easy way to flash the KDZ Method!!
1). Download all The Files Below!
1) Firmware Files - HERE!
2) Download LG Drivers - LG Drivers Here - 10.9 Mb
2.1)Verizon Drivers (Verizon Only)LG_VZW_United_v2.22.0.exe - 7.8 Mb
3) Download LG Flash Tool 2014 tool and extract - LG_Flash_Tool_2014.zip - 3.1 Mb
4) Enter to Download Mode and plug USB into your PC
5) Run LGFlashTool2014.exe and do as following pictures :
(If you cannot run LGFlashTool2014.exe, please install Visual C++ Runtime Library) - Download HERE
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
No need to choose desired language, it automatically change to English as a default setting.
Wait until 100% to complete !
REMEMBER if you get Bootlooping after flashing perform a factory hard reset!
Instructions Here: https://support.t-mobile.com/docs/DOC-7590
_______________________________________________________________________________________________________________________________
2015 (updated with pictures) TOT Method!
RETURN TO STOCK TOT METHOD!, AT&T, T-Mobile, Sprint, Verizon, & a The few International TOT`s that are available
How to Flash YouTube Video:
1. Download Everything!
1.1) Download Both Stock Image & DLL File – Download Here
1.2) Download LG FlashTools V1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
1.3) Download Drivers (Any LG Phone) - Here (Verizon Only) – Here
1.4) Megalock DLL File - Megalock.dll Download
Install:
2. Install LG Drviers
3. Install Flashtool (Don’t run it yet)
4. Extract the TOT file from the Zip
5. Copy MegaLock.dll file to C:\LG\LGFlashtool (This might be a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file)
6. Power off your Device & or pull battery (G3),(G Pro),(G Flex)
7. Press and hold the Vol UP Key and plug in the USB cable to your phone you should now see “Firmware Update/Download Mode” and be in Download mode.
8. Open up Device Manger on your PC
8.1) Click on ports and double click LGEModem
8.2) Go to Port Settings Tab and click Advanced
8.3) Change COM Port to COM41 and click Okay.
8.4) After this you may need to rereboot your phone back into download mode.
9. Run LG Flashtool as Administrator
10. Select Manual Mode at the top
11. Click The DLL Box and choose the DLL file from Above meant for your device
12. Click the S/W box and select the firmware file with the .tot extension, Then Click OK when done.
13. Now Click the Yellow Arrow Button at the top left, The Firmware install will be triggered
14. You may need to unplug/replug phone before Firmware install will start (If it does nothing after clicking the yellow button
15. Should take anywhere between 4-8 Minutes, When its done your phone should reboot
16. LG G3 Only, After reboot you will be presented with a Factory reset screen, Just pull battery and put it back in and it should boot right up!
Do NOT Close the FlashTool Window during firmware update.
99% of the time FlashTool will FAIL after 85% anything after 85% is just your phone rebooting so your safe
_______________________________________________________________________________________________________________________________
2014 TOT Method (Old/Outdated)
_______________________________________________________________________________________________________________________________
Remember if you have bootloop or stuck on LG Logo after flashing make sure you FACTORY RESET!
Extra Important Info:
To Fix ANY Driver issues make sure you reboot your computer after removing and then re-install again, Also try different USB ports or USB cable or try another PC.
Also try this for any driver issues: http://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
REMEMBER if you get Bootlooping after flashing perform a factory hard reset!
Instructions Here: https://support.t-mobile.com/docs/DOC-7590
My Links are ALWAYS hosted on MY servers for NO Downtime! If My site does NOT have what your looking for PM me or post what you want and I will try and get it for you
Feel Free to support me by helping with Server Costs, Late night Beer, and Coffee if you feel my work has helped you
Thank you so much!
Donations: @avinash Rajkumar, @penone1130, @nilesd
Hi bro! In this year 2020 is the same Flash Tools v1.8.1.1023 used or should a newer version be used?
What is the difference of FlashTools 2014, only work KDZ files?
You can clarify!
Last edited:
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone