[GUIDE] Manual updating/Firmware Collection/Rooting [LATEST FW: B225]

[youtuber123]

New firmware .320 C721 available for dload : https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=158613

available on my GG : https://drive.google.com/open?id=1NtEbDqVnKSckwCF5ExBfNWBkNtb6VX4f

---------- Post added at 09:52 AM ---------- Previous post was at 09:21 AM ----------

Do you guys think it's possible to flash C721 over C432 ?

 

[gm007]

New firmware .320 C721 available for dload : https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=158613

available on my GG : https://drive.google.com/open?id=1NtEbDqVnKSckwCF5ExBfNWBkNtb6VX4f

---------- Post added at 09:52 AM ---------- Previous post was at 09:21 AM ----------

Do you guys think it's possible to flash C721 over C432 ?

C721 is for mate 20 rs Porsche design

 

[dzupert]

Any download EMUI Flasher ?

 

[BMWpokerAce]

Rooting my Mate 20 Pro

Hey guys,

long time ago i rooten any phone - so i wanna be sure i´m not brik my phone.

Are these steps ok?
1. i unlock my bl
2. Download the recovery ramdisk image
3. Flash the image to recovery ramdisk through fastboot
(Command: fastboot flash recovery_ramdisk recovery_ramdisk.img)
4. Reboot and keep the Vol+ button pressed to start to recovery mode
5. install latest magisk manager canary build - download here (the link is not working anymore)
so i can take this here? Klick ???

The magisk manager apk i install just after i flash the recovery image via fastboot right?

Hope these steps are ok?

Tanks in advance

 

[side_flip15]

Hey guys,

long time ago i rooten any phone - so i wanna be sure i´m not brik my phone.

Are these steps ok?
1. i unlock my bl
2. Download the recovery ramdisk image
3. Flash the image to recovery ramdisk through fastboot
(Command: fastboot flash recovery_ramdisk recovery_ramdisk.img)
4. Reboot and keep the Vol+ button pressed to start to recovery mode
5. install latest magisk manager canary build - download here (the link is not working anymore)
so i can take this here? Klick ???

The magisk manager apk i install just after i flash the recovery image via fastboot right?

Hope these steps are ok?

Tanks in advance

You should flash a magisk patched recovery ramdisk. Magisk canary build is not necessary, Beta and Stable magisk works fine.

 

[BMWpokerAce]

You should flash a magisk patched recovery ramdisk. Magisk canary build is not necessary, Beta and Stable magisk works fine.

You mean the ramdisk from OP?
Or is there another one i should take?

Thx

 

[side_flip15]

You mean the ramdisk from OP?
Or is there another one i should take?

Thx

The ramdisk from OP might work but I suggest to get the latest stock recovery_ramdisk of your current fw. Patch it with Magisk then flash. You should also flash magisk immediately after factory reset via stock recovery or else phone and messaging app will crash.

 

[momna_shk11]

Excellent guide

 

[momna_shk11]

How to root my device?

 

[goldybewon]

@OldDroid
Till date I am using EMUI Flasher 1.1 for updating my Huawai P30 Pro, no problem at all everything works fine with me. But now I have a question will this method still works 9.1 to 10. I am bit worrying about flashing EMUI 10 over 9.1. EMUI 10 firmware is in my hand.
Expert advice needed so that I'll go ahead.

Thanks,
goldybewon

 

[side_flip15]

@OldDroid
Till date I am using EMUI Flasher 1.1 for updating my Huawai P30 Pro, no problem at all everything works fine with me. But now I have a question will this method still works 9.1 to 10. I am bit worrying about flashing EMUI 10 over 9.1. EMUI 10 firmware is in my hand.
Expert advice needed so that I'll go ahead.

Thanks,
goldybewon

dude please share EMUI 10 firmware :highfive::fingers-crossed:

 

[goldybewon]

dude please share EMUI 10 firmware :highfive::fingers-crossed:

It's on FF.... For P30 Pro

 

[emaldemir]

Teşekkürler

 

[jimibxl]

Why people are talking about p30 as it is a maye 29 pro section

Envoyé de mon LYA-L29 en utilisant Tapatalk

 

[dzupert]

EMUI Flasher 1.1 any download ????

 

[dzupert]

Anyone ?
1.2 not working - https://iv.pl/image/GrNt56D

 

[Deevusone]

Can anyone help me with my issue? I bought a used Mate 20 Pro, and I wasn't aware that the previous owner flashed the fw to another region (c636) and now I'm not getting any OTA updates. I want to reflash the fw back to my region so I can start receiving the OTA updates from my carrier. However, I'm not sure which FW version I should be downloading/installing. I'm in Canada on the Koodo network. As per my device, my build is LYA-L29 9.0.0.265(C636E10). As per Huawei, I should be on the C792 region. Please help.

 

[zhuanyi]

Can anyone help me with my issue? I bought a used Mate 20 Pro, and I wasn't aware that the previous owner flashed the fw to another region (c636) and now I'm not getting any OTA updates. I want to reflash the fw back to my region so I can start receiving the OTA updates from my carrier. However, I'm not sure which FW version I should be downloading/installing. I'm in Canada on the Koodo network. As per my device, my build is LYA-L29 9.0.0.265(C636E10). As per Huawei, I should be on the C792 region. Please help.

Use HiSuite to do a full factory restore, it will automatically be restored to the "official" firmware of your device. Data may or may not be wiped.

 

[Deevusone]

Use HiSuite to do a full factory restore, it will automatically be restored to the "official" firmware of your device. Data may or may not be wiped.

Thank you!! I'll give it a try.

 

[Deevusone]

Use HiSuite to do a full factory restore, it will automatically be restored to the "official" firmware of your device. Data may or may not be wiped.

how do you use HiSuite to do a full factory restore? There was no option for me to do so. When i clicked system recovery, it tells me that my phone is fine.