[Guide] Mate 20 X root is here
- Thread starter freeza
- Start date
none, all the usual suspects / providers of BL codes do not do that anymore...
Sent from my Huawei Mate 20 X EVR-AL00 using Tapatalk
yep, its not optimal... but heres to hoping that huawei will reverse course and provide BL unlocking again sometime in the future. for now, ADB is your friend and trying to squeeze as much as possible out of EMUI and the stock huawei launcher haha.
Sent from my Huawei Mate 20 X EVR-AL00 using Tapatalk
Its just the ability to unlock bootloader. Yes you can unlock this with display password. After that you need boot loader unlock code to unlock bootloader. google for more.
And I will ask. I have AL00, currently on android 9 0.120 with unlock bootloader and root. Is it possible to install the latest adroid 10, the original huawei, and then install root? Does anyone even have EMUI10 root? Thank you in advance for your answer.
unlock functionality is not the problem, its getting the unlock code that is the problem
[/COLOR]
go ahead and try and let us know how it goes
if it doesnt work u can still go back to emui 9 via hisuiteSent from my Huawei Mate 20 X EVR-AL00 using Tapatalk
I too am on emui 9.1 but afraid to go to emui 10 because I do not want to lose root & Bootloader unlock.
Have you tried?
HI, i need to repair my imei from my huawei mate 20x EVR-L29, so I think that I need to root it, any advice to do this? emui 10
you can try it here but 50 USD ...
Good Luck!
https://global-unlocking-solutions.miiduu.com/bootloader-unlock-codes-choose-model-below
Hi letschky. Appreciate that. But will this unlock code work in Emui 10 without any problems? Will I be able to root and get updates?
.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
42Thanks to @topjohnwu, magisk canary builds officially support emui 9, albeit with some caveats.
Note:
This root requires replacing stock recovery with patched magisk init, which will then boot system with magisk support. This means that currently, TWRP or stock recovery and magisk can't exist simultaneously. Also, in order to boot with root, you will NEED to hold down VOLUME UP as the phone is rebooting or booting until the "device is booting" text is displayed. This tells the phone to boot into recovery, which is taken over by magisk init and booted into system with root. Failure to do this will result in the phone booting WITHOUT root or magisk.
I've gone ahead and patched the recovery_ramdisk for EVR-AL00 and EVR-L29.
What is needed:
ADB/fastboot
A computer
A bit of know-how
Step 1: You MUST be bootloader unlocked
-Start by downloading the relevant recovery ramdisk for your variant the AND magisk manager below
Step 2:
-Install the magisk manager
Step 3:
-Copy the recovery ramdisk to a folder with fastboot. Those with environment set up for adb/fastboot can ignore this step.
Step 4:
-Reboot your device to the bootloader. This is accomplished easiest with the adb reboot bootloader command. If you would like to gracefully put the device in bootloader mode, simply power off the device, remove all USB cables from it, but make sure one is plugged into your PC. Once the device is fully powered off, hold down the volume-DOWN key and then press and hold the power button and IMMEDIATELY plug the USB-C cable into the phone.
Step 5:
-Once the device is in bootloader and connected to the PC, run the command "fastboot flash recovery_ramdisk recovery_ramdiskMagiskVARIANT" with VARIANT being whatever ramdisk you downloaded. For example with AL00 you would input "fastboot flash recovery_ramdisk recovery_ramdiskMagiskAL00.img"
Step 6:
-Run the command "fastboot reboot" and immediately disconnect the USB-C cable from the phone. At this point you will want to hold down VOLUME-UP until the "device is booting" message is displayed.
Step 7:
-Once the system is booted, open magisk manager and profit.
Download:
Patched Recovery Ramdisk for EVR-AL00
Patched Recovery Ramdisk for EVR-L29
Stock Recovery Ramdisk for EVR-AL00
Stock Recovery Ramdisk for EVR-L295
Yeah you can. Just flash back the stock Ramdisk, take the update, then flash the magisk Ramdisk again.
Sent from my EVR-AL00 using Tapatalk4Huawei officially stopped giving out bootloader unlocking codes. Period. Full stop. The only way the dubious sites like funky monkey and other rip off sites are getting the codes for you are through some of the greedy Huawei employees who have access to the phone services to provide the codes. These people join with the other rip-off sites like funky to send you the codes. They are expensive, because people rushing to unlock and willing to pay any money. Part of the mponey goes to the leaking employee and part to the rip-off sites.
It was not like this before. XDA initially was a dedicated community on giving tutorials and contributions towards making the best of our phones. But with more companies blocking bootloader unlocking, everyone started to become greedy. We already paid so much for this Mate 20X and still willing to pay to get the unlocking codes to rip off sites?
Even after rooting, there is no proper support for this phone with other apps because of the locked bootloader limitations. Developers can't freely experiment and tinker with this phone because the codes were expensive once, and now there are no more codes, possibly because the employees concerned were fired and these rip-off sites are unable to get the codes from them.
Even custom roms do not have support for this device, or at least fully working ones, because of this.
When will you guys learn? Wake up. Don't fall prey to the scams. Don't pay just because you can and promote this new trend.
The only lesson I learnt is to do research next time BEFORE buying a phone and make sure that bootloader unlocking is supported by the company.
As for me, I already bought this and the only reason I wanted to root is because of removing phone-wide ads. Right now, I am okay with DNS66 which does not require root. It works well, though I need to restart the service manually Otherwise this phone is perfect, and I can always have official OTA updates without breaking anything.3Thank you freeza!
I saw you didn't have a link to the patched L29 so I patched mine and everything is perfect.
If anybody wants to use it or if you want to link it on the OT, it's fine.
Patched Recovery Ramdisk EVR-L293
Just flash back the stock ramdisk through ADB and you're good to go.
Sent from my EVR-AL00 using Tapatalk
